Experimental Simulation of the Reactor Section of Fluid Cokers: Comparison of FCC and Fluid Coke Particles

The hydrodynamics of fluid cokers were studied in a pressurized fully cylindrical cold model of diameter 483 mm, geometrically and dynamically scaled down by a factor of ～20 from commercial units. Differential pressure fluctuations, voidage distributions, solids momentum flux distributions and steady state gas mixing behaviour in the reactor section are compared for the same operating conditions with two kinds of particles, FCC and fluid coke. The voidage distributions and core‐annular flow structures in the reactor section were similar enough that either FCC or fluid coke particles can be used for cold modelling of fluid cokers.     

Hydrocarbon condensation modelling to mitigate fluid coker cyclone fouling

FLUID COKING is a continuous process that thermally converts heavy hydrocarbons, such as oil sands bitumen, to lighter and higher‐value products by horizontal spray injection onto a fluidized bed of hot coke particles. The cyclone sections of commercial fluid coker reactors experience fouling during typical operation, which limits unit run lengths. The main objective of this work is to improve fluid coker reliability by proposing cyclone fouling mitigation strategies based on practical operation modifications. This study developed a process simulation in Aspen Plus to establish the combined impact of vapour‐liquid equilibrium, endothermic thermal cracking reactions, pressure changes, and overall fluid dynamics in the selected fluid coker control volumes. The hydrocarbon composition was defined by applying an assay characterization of distillation data for representative hydrocarbon streams. Case studies were performed to determine the sensitivity of the predicted temperatures and hydrocarbon condensate flow rates for: (a) the burner‐to‐fluid coker transfer line temperature; (b) the hot coke flow rate; (c) hot coke entrainment from the freeboard region; and (d) scouring coke flow rate in the horn chamber. The scouring coke flow rate was identified as the most promising process lever to mitigate fluid coker cyclone fouling.     

Value not virtual ‐ one library's response to the virtual campus

The purpose statement of Deakin University Library is ‘We help people learn.’ This applies equally to on or off‐campus students, which has meant that the Library has strived to provide innovative resources and services to break down the barriers of geography and time experienced by our remote students. With the advances in information and communication technologies, Deakin University Library has been able to capitalise on these developments to deliver electronic services to both on and off‐campus students, thus complementing the valuable services provided by the Library team. While the services provided through the virtual or digital library are a great leap forward, providing access to a wide range of resources and services 24 hours per day x 7 days per week, these services must be seen in conjunction with the professional assistance provided by librarians. Deakin University Library's success is in its customer focus and the value added digital services available through the virtual campus.     

Composition and formation of the sleeve enveloping a central venous catheter

PURPOSE: After catheterization, 42% to 100% of central venous catheters are surrounded by a "fibrin sleeve." This sleeve has been considered the cause of catheter-related infections, withdrawal occlusion, and pulmonary embolism. The reactions between the vein wall and the catheter were studied. METHODS: A silicone catheter was placed in the anterior caval vein of 123 rats. After in situ fixation at scheduled intervals, the pathologic changes were studied on semi-serial histologic sections by means of light microscopy, transmission electron microscopy, and scanning electron microscopy (SEM). In 36 rats, the catheter was withdrawn immediately; in 72 rats, it was left in situ up to 6 months; and in 15 rats, the study was performed up to 10 months after withdrawal of a catheter that had remained in situ for 6 months. RESULTS: In the group in which the catheter was withdrawn immediately, mural thrombi disappeared by day 7. In the group in which the catheter remained in situ, thrombi remained around the proximal portion of the catheter. This pericatheter thrombosis (PCT) was invaded by migrating and proliferating smooth muscle cells (SMCs), originating from an injured vein wall, and transformed from day 7 into a tissue composed predominantly of SMCs and collagen and covered by endothelial cells. Later, the number of cells decreased, and the relative amount of collagen increased. Up to 10 months after withdrawal of the catheter, the collapsed sleeve was still present within the vein. CONCLUSION: The sleeve around a central venous catheter is not a fibrin sleeve, but a stable cellular-collagen tissue covered by endothelium. It is mainly formed by smooth muscle cells migrating from the injured vein wall into the early pericatheter thrombus.     

Creatine kinase isoenzymes in serum from cord blood and the blood of healthy full-term infants during the first three postnatal days

Isoenzymes of creatine kinase (ATP:creatine phosphotransferase; EC 2.7.3.2; CK) were measured by electrophoresis in serum from cord blood and skin-puncture blood taken from 45 healthy full-term infants during the first three postnatal days. Mean total CK activities (in U/L at 30 degrees C) were 185 in cord samples, 536 in samples taken between 5--8 h postnatally, 494 between 24--33 h, and 288 in the 72-100 h samples. Values for all three isoenzymes increased to a peak over this period, with the highest values generally being found in the samples taken 5--33 h after birth; the subsequent decline was most rapid for CK-BB. Serum CK isoenzymes in cord samples and those taken at 72--100 h in the 11 babies delivered by cesarian section did not differ significantly from those of babies delivered vaginally. However the postnatal increases in total CK, CK-MM, and CK-MB (but not in CK-BB) were significantly greater in those patients born by vaginal delivery. The reasons for the increases in CK isoenzymes after birth are not clear, but our results and reported studies on the ontogeny of CK suggest that CK-MB cannot be regarded as a "cardiac-specific" isoenzyme in the neonatal period.     

Compression pre-cracking to generate near threshold fatigue-crack-growth rates in two aluminum alloys

A test program was conducted to generate threshold and near-threshold data on two aluminum alloys: 2324-T39 and 7075-T7351, using compression pre-cracking constant-amplitude (CPCA) threshold testing procedures. Compact tension specimens were tested under stress ratios (R) of 0.1, 0.4, 0.7 or 0.8. Results were compared with either existing load-reduction data from the literature or with data that were generated using the load-reduction procedures. On the 2324 alloy, very little difference was observed between the load-reduction and CPCA test methods, although the CPCA test method consistently produced slightly lower thresholds or slightly faster crack-growth rates. But on the 2324 alloy, most of the load-reduction tests used extremely low initial ΔK values to grow the cracks under load reduction, which may explain the reason for the agreement. These low ΔK values were achieved by using compression pre-cracking to initiate a crack at the crack-starter notch. In contrast, the 7075 alloy showed very large differences between the CPCA and load-reduction results in the near-threshold and threshold regimes for R=0.1 and 0.4. Results under high R conditions (R=0.7) agreed very well between the two threshold test methods. An expression was also developed to generate fatigue-crack-growth-rate data using the CPCA threshold test method that would be unaffected by compressive yielding at the crack-starter notch and produce ‘steady-state’ constant-amplitude data in the near threshold regime.     

A global approach to the physics validation of simulation codes for future nuclear systems

This paper presents a global approach to the validation of the parameters that enter into the neutronics simulation tools for advanced fast reactors with the objective to reduce the uncertainties associated to crucial design parameters. This global approach makes use of sensitivity/uncertainty methods; statistical data adjustments; integral experiment selection, analysis and “representativity” quantification with respect to a reference system; scientifically based cross-section covariance data and appropriate methods for their use in multigroup calculations. This global approach has been applied to the uncertainty reduction on the criticality of the Advanced Burner Reactor (both metal and oxide core versions) presently investigated in the frame of the GNEP initiative. The results obtained are very encouraging and allow to indicate some possible improvements of the ENDF/B-VII data file.     

Attenuation and dispersion for high-Tc superconductingmicrostrip lines

The attenuation and dispersion of microstrip lines of the high-T_c superconductor YBa₂Cu₃O₇ (YBCO) on yttria-stabilized zirconia substrates as a function of frequency and temperature are calculated. The effect on pulse propagation of superconducting and model dispersion in addition to the attenuation is demonstrated. At 60 K, microstrip lines of YBCO are significantly less attenuating at frequencies below 500 GHz than microstrip lines of copper at the same temperature. This advantage is particularly significant at the higher attenuations that result as the substrate thickness is made smaller for miniaturization or to improve the microstrip line bandwidth. The application of YBCO for microstrip lines appears to be most useful at frequencies above 100 GHz and dielectric thicknesses less than 100 μm, where the attenuation of cooled copper is prohibitively large. Cooled to temperatures below 20 K, YBCO may make possible a new generation of extremely high bandwidth (~5 THz), small-feature-size (~5 μm) circuits and devices     

Combination of intrathecal sufentanil 10 mug plus bupivacaine 2.5 mg for labor analgesia: is half the dose enough?

The genetic diversity of 88 Streptococcus suis serotype 2 isolates which were recovered from various countries was examined by randomly amplified polymorphic DNA (RAPD) analysis with three primers. This bacterial collection included 80 isolates of porcine origin and 8 of human origin. This investigation allowed the identification of 23 RAPD types containing 1 to 30 isolates originating from one to six countries. Common RAPD patterns were found between human and pig isolates. The isolates were also tested for the production of virulent factors such as hemolysin, muramidase-released protein (MRP), and extracellular factor (EF). All isolates exhibiting the virulent phenotype hemolysin+ MRP+ EF+ clearly clustered on the basis of fingerprinting by RAPD analysis. In a similar way, most of isolates with the hemolysin- MRP- EF- phenotype were assigned to one RAPD cluster. Therefore, RAPD clusters are more related to the phenotype defined with hemolysin, MRP, and EF than to the geographic origin of the isolates. These data indicate that RAPD analysis used in conjunction with phenotypic methods provides a reliable method for the assessment of the clonal relationship between S. suis isolates responsible for infections in pigs or humans, especially for those exhibiting the classic "virulent" phenotype hemolysin+ MRP+ EF+.