Microsomal and photochemical oxidation of aflatoxin B1

The UV irradiation (lambda = 362 nm) of aflatoxin B1 (AfB1) dissolved in water resulted in the formation of an oxidized product. The process was not inhibited by ionol, a routine inhibitor of the radical processes. The oxidized product was not found in the system where AfB1 was metabolized by the 3-methylcholanthrene-activated rat liver microsomes. It is suggested that the product is identical with 2,3-dihydrodiol of AfB1.     

The role of hydrodynamic stress on the phenotypic characteristics of single and binary biofilms of Pseudomonas fluorescens.

This study investigates the phenotype of turbulent (Re = 5,200) and laminar (Re = 2,000) flow-generated Pseudomonas fluorescens biofilms. Three P. fluorescens strains, the type strain ATCC 13525 and two strains isolated from an industrial processing plant, D3-348 and D3-350, were used throughout this study. The isolated strains were used to form single and binary biofilms. The biofilm physiology (metabolic activity, cellular density, mass, extracellular polymeric substances, structural characteristics and outer membrane proteins [OMP] expression) was compared. The results indicate that, for every situation, turbulent flow-generated biofilms were more active (p < 0.05), had more mass per cm(2) (p < 0.05), a higher cellular density (p < 0.05), distinct morphology, similar matrix proteins (p > 0.1) and identical (isolated strains -single and binary biofilms) and higher (type strain) matrix polysaccharides contents (p < 0.05) than laminar flow-generated biofilms. Flow-generated biofilms formed by the type strain revealed a considerably higher cellular density and amount of matrix polysaccharides than single and binary biofilms formed by the isolated strains (p < 0.05). Similar OMP expression was detected for the several single strains and for the binary situation, not dependent on the hydrodynamic conditions. Binary biofilms revealed an equal coexistence of the isolated strains with apparent neutral interactions. In summary, the biofilms formed by the type strain represent, apparently, the worst situation in a context of control. The results obtained clearly illustrate the importance of considering strain variation and hydrodynamics in biofilm development, and complement previous studies which have focused on physical aspects of structural and density differences.     

UV-LIGA深度光刻机平滑衍射技术研究

UV-LIGA深度光刻技术是加工微型机电系统的一项重要的微细加工技术。介绍了一种平滑衍射效应的位错强度叠加原理，它采用了蝇眼积分透镜去平滑衍射，并模拟数值计算了硅片表面的光强分布，最后给出了光刻结果。     

The time course of plausibility effects on eye movements in reading: Evidence from noun-noun compounds.

Readers' eye movements were monitored as they read sentences containing noun-noun compounds that varied in frequency (e.g., elevator mechanic, mountain lion). The left constituent of the compound was either plausible or implausible as a head noun at the point at which it appeared, whereas the compound as a whole was always plausible. When the head noun analysis of the left constituent was implausible, reading times on this word were inflated, beginning with the first fixation. This finding is consistent with previous demonstrations of very rapid effects of plausibility on eye movements. Compound frequency did not modulate the plausibility effect, and all disruption was resolved by the time readers' eyes moved to the next word. These findings suggest (contra Kennison, 2005) that the parser initially analyzes a singular noun as a head instead of a modifier. In addition, the findings confirm that the very rapid effect of plausibility on eye movements is not due to strategic factors, because in the present experiment, unlike in previous demonstrations, this effect appeared in sentences that were globally plausible. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Integrated fluid handling system for biomolecular interaction analysis.

An integrated fluid handling system used for multichannel biomolecular interaction analysis is described. Reactions between biological molecules are monitored in real time by measuring changes in the angular position where surface plasmon resonance occurs at a biospecific active surface. The adsorption efficiency of the analyte onto the biospecific active surface is up to approximately 3%, due to the low channel height, 50 microns, in the flow cell. When a large part of the total biospecific active surface for surface plasmon resonance probing (approximately 0.15 mm2) is used, the sensitivity is high. Sample sizes in the order of 1-50 microL can be injected. The sample zone dispersion is minimized by the low dead volume in the system (approximately 0.4 microL) accomplished by using integrated sample loops and thin conduits. An asset of this integration is the low reagent consumption. The sensor chip with the biospecific active surface is reusable and easily exchanged. Experimental results obtained with a theophylline monoclonal antibody as the analyte are compared with a theoretical model. The standard deviation for the repeatability is approximately 5% typically with 50 microL of 250 pM analyte, and the assay time is 10 min. The detection limit is approximately 10 pg of the analyte on the probed spot of the surface. Possible improvements of the sensitivity and detection limit are discussed.     

The effect of the textile industry dye bath additive EDTMPA on colour removal characteristics by ozone oxidation.

In this study, the effects of the phosphonic acid based sequestering agent EDTMPA used in the textile dye baths on colour and organic matter removal by ozone oxidation was experimentally investigated. Procion Navy HEXL dyestuff that has been commonly used for the reactive dyeing of cellulose fibers was selected as the model component. The organic matter oxidation by ozone was determined to obey the pseudo-first order kinetics as they are treated singly or in combination. COD removal rates obtained from pseudo-first order reaction kinetics showed that oxidation of Navy HEXL alone (0.0947 L/min) was faster than that of EDTMPA (0.0171 L/min) and EDTMPA with dye (0.0155 L/min) at pH 3.0. It was also found that reaction rates of single EDTMPA removal and EDTMPA and dye mixture removal increased as the reaction pH was increased from 3.0 to 10.5.     

Verf?rbung grau und wei? pigmentierter Beschichtungen auf Acrylharzbasis auf Tropenh?lzern

Ohne Zusammenfassung     

Nucleation of copper on an assembly of carbon microelectrodes

The initial stage of copper electrodeposition on the electrochemically activated assembly of carbon microelectrodes from an acid solution of copper sulfate was investigated using cyclic voltammetry, potentiostatic pulse technique and electrochemical impedance spectroscopy. Analysis of the experimental current transients has been carried out using a non-linear fitting procedure according to the model that takes into account spherical diffusion towards a disc-shaped microelectrode. The higher values of diffusion coefficient in comparison with those observed on planar electrodes were explained with an increased diffusion caused by the electrode geometry. Impedance spectra showed two time constants, the high-frequency related to the charge transfer process and the low-frequency corresponded to the deposit morphology.     

Hybrid Approach for Addressing Uncertainty in Risk Assessments

Parameter uncertainty is a major aspect of the model-based estimation of the risk of human exposure to pollutants. The Monte Carlo method, which applies probability theory to address model parameter uncertainty, relies on a statistical representation of available information. In recent years, other uncertainty theories have been proposed as alternative approaches to address model parameter uncertainty in situations where available information is insufficient to identify statistically representative probability distributions, due in particular to data scarcity. The simplest such theory is possibility theory, which uses so-called fuzzy numbers to represent model parameter uncertainty. In practice, it may occur that certain model parameters can be reasonably represented by probability distributions, because there are sufficient data available to substantiate such distributions by statistical analysis, while others are better represented by fuzzy numbers (due to data scarcity). The question then arises as to how these two modes of representation of model parameter uncertainty can be combined for the purpose of estimating the risk of exposure. This paper proposes an approach (termed a hybrid approach) which combines Monte Carlo random sampling of probability distribution functions with fuzzy calculus. The approach is applied to a real case of estimation of human exposure, via vegetable consumption, to cadmium present in the surficial soils of an industrial site located in the north of France. The application illustrates the potential of the proposed approach, which allows the uncertainty affecting model parameters to be represented in a way that is consistent with the information at hand. Also, because the hybrid approach takes advantage of the “rich” information provided by probability distributions, while retaining the conservative character of fuzzy calculus, it is believed to hold value in terms of a “reasonable” application of the precautionary principle.     

Interlaboratory ring test of time-resolved fluoroimmunoassays for zeranol and alpha-zearalenol and comparison with zeranol test kits.

Many zeranol immunoassay test kits cross-react with toxins formed by naturally occurring Fusarium spp. fungi, leading to false-positive screening results. This paper describes the evaluation and application of recently published, dry reagent time-resolved fluoroimmunoassays (TR-FIA) for zeranol and the toxin alpha-zearalenol. A ring test of bovine urine fortified with zeranol and/or alpha-zearalenol in four European Union National Reference Laboratories demonstrated that the TR-FIA tests were accurate and robust. The alpha-zearalenol TR-FIA satisfactorily quantified alpha-zearalenol in urine fortified at 10-30 ng ml(-1). The specificity-enhanced zeranol TR-FIA accurately quantified zeranol in the range 2-5 ng ml(-1) and gave no false-positive results in blank urine, even in the presence of 30 ng ml(-1) alpha-zearalenol. Zeranol TR-FIA specificity was demonstrated further by analysing incurred zeranol-free urine samples containing natural Fusarium spp. toxins. The TR-FIA yielded no false-positive results in the presence of up to 22 ng ml(-1) toxins. The performance of four commercially available zeranol immunoassay test kits was more variable. Three kits produced many false-positive results. One kit produced only one potential false-positive using a protocol that was longer than that of the TR-FIA. These TR-FIAs will be valuable tools to develop inspection criteria to distinguish illegal zeranol abuse from contamination arising from in vivo metabolism of Fusarium spp. toxins.