Synergistic effect of nanoparticles and Thalassospira sp. isolated from Bahregan area in biodegradation of oil sludge

Oil sludge is obtained from the contaminated site of Bahregan area in the Persian Gulf in Iran. Chemotaxis was used for the isolation of alkane-degrading bacteria from oil sludge and the alk genes were determined with specific primers. bac1 identified in Thalassospira was selected as a powerful strain for biodegradation of oil sludge. Biodegradation of oil sludge by bac1 in the presence of nanoparticles was investigated by GC-MS analysis. Synergistic effect of Fe₂O₃ and Fe₃O₄ nanoparticles on bacteria increases the biodegradation of oil sludge and produces cyclosiloxane compound which is used in the field of medicine; however, the Thalassospira reduced its toxicity in the environment.     

Wireless Brain Computer Interface for Smart Home and Medical System

Wireless Personal Communications - The number of aged and disabled people has been increasing worldwide. To look after these people is a big challenge in this era. However, scientists overcome the...     

A modified power control scheme for remedying the effects of traffic nonuniformity in LEO satellite communications systems

It has been shown in our previous studies that the geographical traffic nonuniformity considerably affects the performance of the low earth orbit satellite communications systems. In this paper, a new scheme for improving the throughput characteristics of these systems at nonuniform traffic distribution is proposed. In this method, some parts of the users under the satellite which is flying over the area with high traffic load are assigned to its neighbor satellites with lower transmitting power levels. It is shown that the method equalizes the traffic loads of the satellites to some degree and, hence, can improve the throughput characteristics of the system.     

Vibrational Analysis for an Axially Moving Microbeam with Two Temperatures

In this article, the effect of two temperatures on an axially moving microbeam subjected to ramp-type heating is studied. The generalized thermoelasticity theory with one relaxation time model is used. The governing equations are expressed in Laplace transform domain. Based on Fourier series expansion technique, the inversion of Laplace transform is done numerically. Some comparisons have been shown in figures to present the effect of the temperature discrepancy and the transport speed on all the studied field quantities. Additional results across the thickness of the microbeam are presented graphically.     

Feedback control of coronal plane hip angle in paraplegic subjectsusing functional neuromuscular stimulation

This paper reports on an investigation of feedback control of coronal plane posture in paraplegic subjects who stand using functional neuromuscular stimulation (FNS). A feedback control system directed at regulating coronal plane hip angle in neutral position was designed, implemented, and evaluated in two paraplegic subjects. The control system included sensor mounting and signal processing techniques, a two-stage feedback controller, stimulation hardware, and a set of percutaneous intramuscular electrodes. The feedback controller consisted of two-stages in cascade: a modified discrete-time proportional-integral-derivative (PID) stage and a nonlinear single-input, multiple-output stage to determine the stimulation to be sent to several muscles. The focus of this work was on evaluating the performance of the feedback controller by comparing the response of the feedback-controlled system to that of an open-loop stimulation system. In an evaluation based on temporal response characteristics the controlled system exhibited a 41% reduction in root-mean-squared (rms) error (where error is defined as the deviation from the desired angle), a 52% reduction in steady-state error, and a 22% reduction in hip compliance. In addition, the feedback-controlled system exhibited significant reductions in variability of these measures on several days. These results demonstrate the ability of the feedback controller to improve the temporal response characteristics of the FNS control system.     

Effect of bit-to-bit dependence on packet error rate using asynchronous DS-CDMA for mobile packet radio networks

The probability of packet success for asynchronous direct sequence code division multiple access (DS-CDMA) over the multipath fading channel is investigated under different fading conditions and for different cases. We studied the bit-to-bit dependence caused by the multipath fading and by the multiple access interference (MAI) originating from the chip and phase offsets between the desired and interfering signals. We investigated the effect of using the Gaussian versus the improved Gaussian process on the computation of probability of packet success as well as the effect of the bit-to-bit dependence within a packet. The improved Gaussian approximation provides more accurate values for the probability of bit error for any number of simultaneous users, while it also allows us to incorporate the effects of bit-to-bit dependence into the calculations of the probability of packet success.This paper was presented in part at the 17th Biennial Symposium on Communiations, Kingston, June 1994. This work was supported by a strategic grant (STR-0100720) from the Natural Sciences and Engineering Research Council (NSERC) of Canada.     

Wideband Frequency-Reconfigurable Antenna for Airborne Applications

Wireless Personal Communications - One of the important objectives of underwater acoustic sensor network is to extend the lifespan of a network which depends on the topology control mechanisms....     

Scattering of Electromagnetic Waves by a Coated Nihility Cylinder

An analytical solution for the scattering of electromagnetic plane waves from an infinitely long nihility cylinder, coated with a double positive (DPS), double negative (DNG), epsilon negative (ENG), or mu negative (MNG) layer of uniform thickness is presented. The solution is determined by solving the scalar wave equation in the cylindrical coordinates, for different regions and applying the appropriate boundary conditions at the interfaces. Both TM and TE polarizations as incident plane have been considered in the analysis. Comparison of behaviors of a coated nihility cylinder with a coated PEC cylinder has been made. It is noted that two situations are more closer for DNG coating as compared to DPS coating.     

On designing issues of the next generation mobile network

Next generation mobile network (NGMN) is envisaged to support seamless mobility across disparate access technologies in a transparent manner. The success of NGMN design will depend on its ability to address key design issues, mainly architectural adaptation and modification of service continuity functions (i.e., mobility and resource management) that arise from such interoperability. The solutions presented in this article attempt to resolve these issues by considering an IP-based interworking framework that promotes evolution of individual networks and integration of new technologies