Oxidation of formic acid at a high surface area supported platinum modified by foreign metal adatoms

The anodic oxidation of formic acid was studied on platinum distributed in the form of small particles in a porous substrate modified by metal adatoms deposited at underpotentials. The rate of the reaction was greatly enhanced on the commercial catalyst Powercat 3000 (PC 3000). The hydrogen adsorption and the underpotential deposition of several metals at PC 3000 were shown to be dissimilar to that at smooth polycrystalline Pt. Steady-state and long-term experiments were performed to determine the stability of this electrode.     

The applied pretreatment (blanching,ascorbic acid) at the manufacture process affects the quality of nectarine purée processed by hydrostatic high pressure

A nectarine purée was manufactured with different pretreatments (thermal blanching or ascorbic acid – AA – addition), and then, the purée was processed by high‐pressure treatment to evaluate the effect of the initial manufacture conditions in the stability of the processed purées. A thermal treatment was also carried out to compare the effect with the high‐pressure processing (HPP). All applied processes were effective to ensure the microbiological safety of the purées. However, the pretreatment (thermal blanching or AA addition) applied during the manufacture affected the final quality of the processed purées. Initially, the AA addition had a protective effect on colour degradation during the manufacture of the purées; however, when these purées were treated by HPP showed less colour stability during storage, lower bioactive compounds content, and antioxidant activity. In contrast, purées with an initial thermal blanching maintained better the quality after HPP and during storage.     

Characterization of a water-based paint for corrosion protection

Corrosion of steel rebars in reinforced concrete is one of the major problems in the construction industry. Carbonation reactions of concrete with carbon dioxide and, mainly, the chloride salts action are the main causes responsible for concrete degradation. Protective coatings help to improve the durability of concrete structures by acting as a physical barrier against the corrosion agents. Waterborne paints are usually used for concrete protection rather than solvent-based paints since they are less pollutant. The aim of this work is to investigate the influence of the pore size and porosity on the permeability of the paints films toward sodium chloride. Three characterization methods from membrane science were implemented to characterize paint coatings. The time-lag method was used to determine the permeability toward the sodium chloride and toward helium and argon, these for approximately 100% relative humidity. From the seven waterborne paints formulated, only one was found to be suitable for surface protection of reinforced concrete, since its permeability toward NaCl was smaller than 10⁻¹⁴ m² s⁻¹, the threshold value required by National Laboratory of Civil Engineering (LNEC) in Portugal. For the formulated paints, it was observed that the average pore size correlates well with the permeability toward sodium chloride. This is an important result since obtaining the permeability toward sodium chloride of corrosion protective paints is very time consuming, while the average pore size can be obtained in a much shorter time.     

Determining adulteration of canned products using SNIF-NMR and IRMS: detection of undeclared addition of synthetic acetic acid

Possible adulteration of canned products containing spirit vinegar pickle by adding synthetic acetic acid is a significant problem of the food industry. Isotope analyses, which determine botanical origin of acetic acid and also can detect synthetic acid, were applied to detect undeclared addition of synthetic acetic acid to canned products. The aim of the study was to improve the extraction technique for the SNIF-NMR (²H/¹H; site-specific natural isotopic fractionation-nuclear magnetic resonance) and IRMS (¹³C/¹²C; isotope ratio mass spectrometry) isotope methods and for an atypical matrix and to determine isotope ratios in canned vegetables pickle to prove their adulteration or authenticity. The following set of canned products was analysed: pickled cucumbers (n = 16) and one vinegar pickle purchased in the Czech market and six model (cucumber) pickles. The determined ratios of ²H/¹H and ¹³C/¹²C for the pickled cucumbers proved to be authentic ranged from 89.4 to 107.0 ppm and from ?28.7 to ?15.6 ‰, respectively; for the synthetic acetic acids diluted with water they ranged from 114.2 to 129.0 ppm and from ?44.9 to ?33.4 ‰, respectively. Isotope analyses were confirmed as a reliable tool for assessing authenticity of canned products. The method enables detection of synthetic acetic acid addition into vinegars and canned vegetables containing vinegar pickle up from 20 % (of total acidity).     

A novel natural rubber‐graft‐cassava starch foam for oil/gasohol absorption

The objective of this work was to study a novel foam prepared from natural rubber grafted with cassava starch (NR‐graft‐CSt) with the addition of super cell (SC) as a blowing agent. The effects of the blowing agent and grafting versus non‐grafting of the starch and the natural rubber on the properties of the foam were investigated. The results show that the optimum curing time decreases with increasing SC loading as observed using a moving die rheometer. The porosity, the number of cells per unit volume and the cell size of the NR/CSt blend increase as a function of the SC loading in the foam. A more open cell structure is produced by higher loadings of SC. The greatest number of cells per unit volume is found at 2 and 6 phr SC for NR‐graft‐CSt and NR/CSt blend, respectively. The foam produced was used as an absorbent for oil. The NR‐graft‐CSt foam shows a maximum percentage oil absorption of around 7 g g^?1. The NR‐graft‐CSt foam is able to be reused as an oil absorbent for a maximum number of over 30 times. The NR‐graft‐CSt foam shows better toluene resistance than the NR/CSt blend. © 2016 Society of Chemical Industry     

A study on the colloidal nature of urea‐formaldehyde resins and its relation with adhesive performance

Urea‐formaldehyde (UF) resins present a swollen colloidal phase dispersed within a continuous water phase containing soluble oligomers. The main goal of the present investigation is to clarify the physical and chemical nature of those two phases and elucidate their impact on the bonding process. Optical and electronic microscopy has provided information on the morphology of the colloidal phase, showing primary particles and particle agglomerates. Mechanisms are suggested for the colloidal stabilization and dilution‐induced flocculation. Three commercial UF resins with different F/U molar ratios were studied using particle size distribution (PSD) analysis. The results showed the influence of the resin's degree of condensation and the aging status on the size of the colloidal structures. Gel permeation chromatography analysis was performed on samples of different resins and of the respective continuous and dispersed phases, separated by centrifugation. The quantified fraction of insoluble molecular aggregates present in the chromatograms was related to the resins synthesis conditions and age. Differential scanning calorimetry and tensile shear strength tests were performed to evaluate the reactivity and adhesive performance of each phase. It is suggested that the colloidal phase acts as a reactive filler at the wood joint interfaces, contributing for the resins bonding performance. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Modelling the effect of sublethal injury on the distribution of the lag times of individual cells of Lactobacillus plantarum

The effect of heat stress on subsequent duration of the lag time of individual cells of Lactobacillus plantarum was analysed by flow cytometry. The results show clearly that both the mean and the standard deviation of the distribution of the lag time increased after sublethal heat treatment. The distributions of the lag times or the log lag times of untreated and treated cells, respectively, could be described as extreme value distributions. From these distributions, the distribution of the minimum lag times could be calculated and thus the effect of inoculum size on the apparent lag could be deduced. The results show clearly that the apparent lag time is dependent on the size of the inoculum, especially when the inoculum is sublethally injured.     

An analysis of the numerical path dependence of the J-integral

Path dependent behaviour of the J-integral computed from the results of a finite element analysis may have two sources. The first is the history dependence of the strain energy, which causes J to lose its crack tip strain field characterizing property. The second is rooted in the principle of the finite element displacement method which ensures equilibrium only for each element as a whole, not for points within an element. It is of the utmost importance for a J-based safety assessment that these two sources be clearly distinguished as the latter may be reduced by mesh refinement whereas the former may serve as a criterion for assessing whether J can still be interpreted in its crack tip characterizing sense.The present paper proposes a numerical procedure for this distinction. Two examples confirm the procedure's validity and illustrate the practical necessity of careful evaluation of computed J-values.