Investigating fuel-cell transport limitations using hydrogen limiting current

Reducing mass-transport losses in polymer-electrolyte fuel cells (PEFCs) is essential to increase their power density and reduce overall stack cost. At the same time, cost also motivates the reduction in expensive precious-metal catalysts, which results in higher local transport losses in the catalyst layers. In this paper, we use a hydrogen-pump limiting-current setup to explore the gas-phase transport losses through PEFC catalyst layers and various gas-diffusion and microporous layers. It is shown that the effective diffusivity in the gas-diffusion layers is a strong function of liquid saturation. In addition, it is shown how the catalyst layer unexpectedly contributes significantly to the overall measured transport resistance. This is especially true for low catalyst loadings. It is also shown how the various losses can be separated into different mechanisms including diffusional processes and mass-dependent and independent ones, where the data suggests that a large part of the transport resistance in catalyst layers cannot be attributed to a gas-phase diffusional process. The technique is promising for deconvoluting transport losses in PEFCs.     

Self Assembly–Assisted Additive Manufacturing: Direct Ink Write 3D Printing of Epoxy–Amine Thermosets

The use of self‐assembling, pre‐polymer materials in 3D printing is rare, due to difficulties of facilitating printing with low molecular weight species and preserving their reactivity and/or functions on the macroscale. Akin to 3D printing of small molecules, examples of extrusion‐based printing of pre‐polymer thermosets are uncommon, arising from their limited rheological tuneability and slow reactions kinetics. The direct ink write (DIW) 3D printing of a two‐part resin, Epon 828 and Jeffamine D230, using a self‐assembly approach is reported. Through the addition of self‐assembling, ureidopyrimidinone‐modified Jeffamine D230 and nanoclay filler, suitable viscoelastic properties are obtained, enabling 3D printing of the epoxy–amine pre‐polymer resin. A significant increase in viscosity is observed, with an infinite shear rate viscosity of approximately two orders of magnitude higher than control resins, in addition to, an increase in yield strength and thixotropic behavior. Printing of simple geometries is demonstrated with parts showing excellent interlayer adhesion, unachievable using control resins.     

Numerical Study of a Thermal Energy Storage Device Utilizing Graphite Foam Infiltrated with a Phase Change Material

Phase change materials (PCM) utilized for energy storage have notoriously low thermal conductivities. As a result, systems based only on a PCM have large internal thermal gradients and slow reaction times making them impractical for most applications. To overcome these issues, various approaches have been utilized to increase the conductivity of the PCM systems. One approach includes the utilization of porous, high thermal conductivity graphite foam infiltrated with a PCM. Here, a numerical approach was employed in order to study the graphite foam/PCM thermal energy storage system (TES). The numerical model was constructed to emulate an experimental set-up allowing for comparisons between the two. The numerical simulation results exhibited accurate time-dependent temperatures at various locations as well as a history of the melt-front’s progression when compared to the experimental data. Due to the model’s successful capture of the transient response of the TES, it is feasible to employ the numerical procedure for designing subsequent thermal energy storage systems.     

Effective Number of Samples and Pseudo-Random Nonlinear Distortions in Digital OFDM Coded Signal

This paper concerns the theoretical modeling of OFDM coded signal’s degradation caused by pseudo-random nonlinear distortions introduced by an analog-to-digital or digital-to-analog converter. A new quantity, the effective number of samples, is defined and used for the derivation of accurate expressions for the autocorrelation function and the total power of the distortions. The derivation is based on a probabilistic model of the signal and its transition probability. It is shown that for digital (discrete and quantized) signals the effective number of samples replaces the total number of samples and is the proper quantity defining their properties.     

Design and statistical analysis of plasma coatings on superalloy for gas turbine applications

The Influence of plasma sprayed NiCr–Cr₂O₃ and Al₂O₃–40% TiO₂ (A40T) coatings on Inconel 617 are investigated at 900 and 1000 °C under mixed salt environment for gas turbine applications. The results revealed that the plasma coated alloy exhibits lower mass change than bare alloy in the Na₂SO₄ and NaCl salt mixture with and without V₂O₅. The response to the experimental analysis is statistically evaluated using 2³ factorial design. Further the exposed samples were analyzed by means of optical image, SEM, EDS and XRD results. The EDS and XRD analysis revealed that the oxides are rich in Ni and Mo on the surface of the samples. The coated samples exhibited better corrosion resistance in A40T when compared to NiCr–Cr₂O₃ coatings than bare alloy.     

Reprint of “Pharmacokinetic modelling of the anti-malarial drug artesunate and its active metabolite dihydroartemisinin”

A four compartment mechanistic mathematical model is developed for the pharmacokinetics of the commonly used anti-malarial drug artesunate and its principle metabolite dihydroartemisinin following oral administration of artesunate. The model is structurally unidentifiable unless additional constraints are imposed. Combinations of mechanistically derived constraints are considered to assess their effects on structural identifiability and on model fits. Certain combinations of the constraints give rise to locally or globally identifiable model structures.     

Thiazolidinediones: An In–Depth Study of Their Synthesis and Application to Medicinal Chemistry in the Treatment of Diabetes Mellitus

2,4-Thiazolidinedione (TZD) is a privileged and highly utilised scaffold for the development of pharmaceutically active compounds. This sulfur-containing heterocycle is a versatile pharmacophore that confers a diverse range of pharmacological activities. TZD has been shown to exhibit biological action towards a vast range of targets interesting to medicinal chemists. In this review, we attempt to provide insight into both the historical conventional and the use of novel methodologies to synthesise the TZD core framework. Further to this, synthetic procedures utilised to substitute the TZD molecule at the activated methylene C₅ and N₃ position are reviewed. Finally, research into developing clinical agents, which act as modulators of peroxisome proliferator-activated receptors gamma (PPARγ), protein tyrosine phosphatase 1B (PTP1B) and aldose reductase 2 (ALR2), are discussed. These are the three most targeted receptors for the treatment of diabetes mellitus (DM).     

Failure Analysis of a Composite Rudder Stock Using 3D X-ray Microcomputed Tomography

Journal of Failure Analysis and Prevention - A failure analysis investigation was performed on the remnants of a carbon fiber rudder stock that fractured during operation on a vessel in an offshore...