Energy and economic aspects of synthesis gas production from oil sludge and plastic waste

A series of experiments have been performed to investigate the influence of reaction temperature, the equivalence ratio (ER), and blending ratio on the gas composition, tar content and higher heating value (HHV) of synthesis gas. H₂ content decreased from 10.7 to 8.2% in the range of BR while CO and CH₄ increased from 17.4 to 23.1% and 3.4 to 6.3%, respectively. HHV increased with BR and H₂/CO showed an opposite trend. The highest HHV and H₂/CO were obtained at 100%PW and 100%OS, respectively. Tar content increased from 4.8 to 9.5?g/Nm³ with BR increasing in the range because of a reduction in the endothermic nature of volatile combustion.     

Comparison of Bougainvillea spectabilis and Bougainvillea glabra species inhibited in Pakistan based on microscopic studies: Light microscope and scanning electron microscope

The anatomical variations of two plants from the Nyctaginaceae family, Bougainvillea spectabilis and Bougainvillea glabra, were studied using light and scanning electron microscopy methods in this work. Bougainvillea is a dicotyledonous with defensive traits that can withstand extreme (hot and dry) settings; according to the findings, crystal inclusions in cells, woody spines, and an abnormal development pattern are all features that help them survive against predators and are unique to this species. The Bougainvillea plant's leaves are arranged in simple pattern, alternate to each other along stem having an undulate leaves edge and an oval form. The xylem and phloem, palisade, parenchyma midrib, spongy mesophyll, raphide crystal bundles, and trichomes were all visible when bracts and leaves were transversally sectioned and dyed with toluidine blue O (TBO). The presence of crystals was confirmed by a detailed examination of the transverse leaves by using bright-field and cross-polarizing microscopy. Dissecting microscopic examination showed that all the leaves revealed leaves venation pattern that had midvein, lateral veins areoles, and trichomes. Although trichomes have been identified on both sides, a closer look at a cleaned leaf dyed with TBO showed multicellular abundant trichomes on adaxial surface. Stomata complexes were typically found on the abaxial surface of the leaf according to epidermal peels. Present studies also showed that on adaxial side, stomata were lesser in number or were absent and also showed that the morphologies of the pavement cells on the adaxial and abaxial sides of the leaf differed.     

Non-blind Arnold scrambled hybrid image watermarking in YCbCr color space

Microsystem Technologies - Due to fast technological development, human beings generally depend upon computer and other digital equipments in different areas of concern/applications. Therefore,...     

Silicon Mitigates Drought Stress in Wheat (Triticum aestivum L.) Through Improving Photosynthetic Pigments,Biochemical and Yield Characters

Silicon - Feeling prone to stress differs with plant production stage, water scarcity near commencement of grain filling phase has a significant reduced grain yield through fewer endosperm and sink...     

A new approach for simplification and control of linear time invariant systems

Microsystem Technologies - This study presents a new approach for system simplification and control. This approach is based on the behaviour of growth and reproduction of weed plants namely...     

Design and computational analysis of a metal hydride hydrogen storage system with hexagonal honeycomb based heat transfer enhancements-part A

In this study, design and performance analysis is carried out for a 10 kWh metal hydride based hydrogen storage system. The system is equipped with distinctive aluminium hexagonal honeycomb based heat transfer enhancements (HTE) having higher surface area to volume ratio for effective heat transfer combined with low system weight addition. The system performance was studied under different operating conditions. The optimum absorption condition was achieved at 35 bar with water at room temperature as heat transfer fluid where up to 90% absorption was completed in 7200 s. The performance of the reactor was observed to significantly improve upon the addition of the HTE network at a minimal system weight penalty.     

Exhaust emission profiling of fatty acid methyl esters and NOx control studies using selective synthetic and natural additives

Clean Technologies and Environmental Policy - The present study was focused on the optimized biodiesel production using Moringa oleifera (M. oleifera) and rice bran oils, characterization, and...     

Highly porous and thermally stable tribopositive hybrid bimetallic cryogel to boost up the performance of triboelectric nanogenerators

There have been tremendous efforts made to investigate various materials to enhance the electrical performance of triboelectric nanogenerators (TENGs) but there is still demand for some techniques to further enhance the performance of tribomaterials. Therefore, we fabricated a bimetallic hybrid cryogel via cheap and facile UV-radiation as well as in situ reduction method. Fabricated TENG device made up of porous hybrid bimetallic cryogel film containing silver and gold nanoparticles as tribopositive material and poly dimethyl siloxane (PDMS) as a tribonegative layer with dimension of 1 × 2 cm² has the ability to produced output voltage of 262.14 V with current density of 27.52 mA/m² and 7.44 W/m² peak power density, which was sufficient to light up more than 120 white light emitting-diodes (LEDs). Porous and rough structure, interaction of nanoparticles was the reason behind the performance enhancement of tribopositive material. Thus, this study introduces a very stable and easily synthesized bimetallic hybrid cryogel as a tribopositive material to enhance the performance of tribomaterials to design high performance TENG devices.