The optimal solution for the flow of a fourth-grade fluid with partial slip

The steady flow of a non-Newtonian fluid when slippage between the plate and the fluid occurs is considered. The constitutive equations of the fluid are modeled for a fourth-grade non-Newtonian fluid with partial slip; they give rise to nonlinear boundary value problems. Analytical solutions are obtained using powerful analytic techniques for solving nonlinear problems, homotopy perturbation and optimal homotopy asymptotic methods. The results obtained are compared with the numerical results and it is shown that solutions exist for all values of the non-Newtonian parameters. The solutions valid for the no-slip condition for all values of the non-Newtonian parameters can be derived as special cases of the present analysis. Finally the solutions are discussed using a graphical approach.     

A survey on search results diversification techniques

The quantity of information placed on the web has been greater than before and is increasing rapidly day by day. Searching through the huge amount of data and finding the most relevant and useful result set involves searching, ranking, and presenting the results. Most of the users probe into the top few results and neglect the rest. In order to increase user’s satisfaction, the presented result set should not only be relevant to the search topic, but should also present a variety of perspectives, that is, the results should be different from one another. The effectiveness of web search and the satisfaction of users can be enhanced through providing various results of a search query in a certain order of relevance and concern. The technique used to avoid presenting similar, though relevant, results to the user is known as a diversification of search results. This article presents a survey of the approaches used for search result diversification. To this end, this article not only provides a technical survey of existing diversification techniques, but also presents a taxonomy of diversification algorithms with respect to the types of search queries.     

A model to measure QoE for virtual personal assistant

Until now the virtual assistants (like Siri, Google Now and Cortana) have primarily been confined to voice input and output only. Is there a justification for voice only confinement or can we enhance the user experience by adding a visual output? We hypothesized that providing a higher level of visual/auditory immersion would enhance the quality of user experience. In order to test this hypothesis, we first developed 4 variants of virtual assistant, each with a different audio/visual level of immersion. Developed virtual assistant systems were the following; audio only, audio and 2D visual display, audio and 3D visual display and audio and immersive 3D visual display. We developed a plan for usability testing of all 4 variants. The usability testing was conducted with 30 subjects against eight (8) dependent variables included presence, involvement, attention, reliability, dependency, easiness, satisfaction and expectations. Each subject rated these dependent variables based on a scale of 1–5, 5 being the highest value. The raw data collected from usability testing was then analyzed through several tools in order to determine the factors contributing towards the quality of experience for each of the 4 variants. The significant factors were then used develop a model that measures the quality of user experience. It was found that each variant had a different set of significant variables. Hence, in order to rate each system there is a need to develop a scale that is dependent upon the unique set of variables for the respective variant. Furthermore, it was found that variant 4 scored the highest rate for Quality of Experience (QoE). Lastly several other qualitative conclusions were also drawn from this research that will guide future work in the field of virtual assistants.     

A framework to explore results in multiple media information aggregated search

On web information exists in the form of text, audio, image, and video objects often referred to multiple media objects. Vertical web search provides the search of multiple media information usually via keyword-based queries. The search results in different media formats usually presented in separate panels/tabs; integration is mostly non-blended. Therefore, results exploration via vertical web search engines require the selection of a source and scrolling of a linear ranked list of results. Relationships in the results presented in separate panels/tabs are mostly not considered. Search aggregations unify results from several vertical web sources via blended integration, but exploration still requires scrolling of a linear ranked list. Multimedia search frameworks provide the exploration of results in different media formats but more focused towards the retrieval issues. We proposed a multiple media information search framework to address issues, particularly in aggregated search. Our search framework provides a mechanism to explore results via non-linear ways. The search framework realized by suggesting a framework architecture design and instantiating a search tool. The effectiveness of blended integration and browsing is measured via precision and click through rate respectively. Search task support in results exploration mechanism measured via task-based evaluation. We also validated the conformance of various search/exploration attributes discussed in the state-of-the-art in our frameworks.     

Selenium Speciation Studies from Soan-Sakesar Valley,Salt Range,Pakistan

Abstract

A regional study of Selenium (Se) speciation in surface waters, groundwaters, and saturation extracts from Soan-Sakesar valley Salt-Range, Pakistan was started in March 1994 and completed in October 1996. Groundwaters, streams, and springs had median concentrations of: total Se 48, 404.5, and 82 μg/l; Se^+VI 40, 350 and 51 μg/l; Se^+IV 8, 48 and 29 μg/l; Se^-II 0, 6.5 and 2.0 μg/l, respectively. The concentration of Se exceeded the recommended water quality guidelines for drinking and irrigation water of 10 and 20 μg/l, respectively. In saturation extracts, median total Se, Se^+VI, Se^+IV and Se^-II were 190, 146, 37 and 7.0 μg/l, respectively. Uchhali, Khabbaki and Jahlar lake water samples had the mean concentration of: total Se 2103, 670 and 297 μg/l; Se^+VI 1777, 470, and 233 μg/l; Se^+IV 291, 166 and 39 μg/l; Se^-II 35, 34 and 25 μg/l, respectively. The Sakesar limestone Formation of Eocene age rich in shales and fossils (median Se concentration 7.2 μg/kg) are considered to be the source of selenium that have enriched soils of Soan-Sakesar valley. Selenim speciation results show the abundance of selenate in all the environmental samples. A linear relationship between Se^+VI and pH (R²= 0.84, 0.58, 0.88, 0.82, and 0.91; significant at the 0.05 level) for groundwater, saturation extract, stream, spring, and lake waters were noted, suggesting that the Se^+VI in the samples is highly associated with pH. Linear relationships were established between Se^+VI and Mg, NO₃, and SO₄ for groundwater (R²= 0.24, 0.16, and 0.64; significant at the 0.01 level) and surface water (R²= 0.96, 0.14, and 0.91; significant at the 0.001 level). This suggests the high concentrations of Mg, NO₃ and SO₄, which strongly adsorb and compete with selenium for surface site, increases the Se^+VI fraction. The results show that the higher percentage of selenate on other species in the analyzed samples is favored by higher pH and oxidizing environments of the valley.     

Reliability analysis of TLP tethers under impulsive loading

In the present study, reliability assessment of Tension Leg Platform (TLP) tethers against maximum tension (i.e. tension exceeding yield) has been carried out under combined action of extreme wave and impulsive forces. For this purpose, a nonlinear dynamic analysis of TLP has been carried out in time domain. A limit state function for maximum tension (i.e. tension exceeding yield) has been derived employing Von-Mises theory of failure. Using this derived limit state function and responses obtained after dynamic analysis under sinusoidal, half-triangular and triangular impulsive forces, reliability assessment of the TLP tethers has been carried out. Design point, important for probabilistic design of tethers, has been located on the failure surface after solving a constrained optimization problem. To study the influence of various random variables on tether reliability, sensitivity analysis has been carried out. Effects of angle of impact; effect of variable submergence; and effect of material yield strength on tether reliability have also been studied on parametric basis. Effect of uncertainty on overall tether reliability has also been discussed to show the importance of quality control in the various design parameters.     

Reliability analysis of nuclear containment without metallic liners against jet aircraft crash

The present study presents a methodology for detailed reliability analysis of nuclear containment without metallic liners against aircraft crash. For this purpose, a nonlinear limit state function has been derived using violation of tolerable crack width as failure criterion. This criterion has been considered as failure criterion because radioactive radiations may come out if size of crack becomes more than the tolerable crack width. The derived limit state uses the response of containment that has been obtained from a detailed dynamic analysis of nuclear containment under an impact of a large size Boeing jet aircraft. Using this response in conjunction with limit state function, the reliabilities and probabilities of failures are obtained at a number of vulnerable locations employing an efficient first-order reliability method (FORM). These values of reliability and probability of failure at various vulnerable locations are then used for the estimation of conditional and annual reliabilities of nuclear containment as a function of its location from the airport. To study the influence of the various random variables on containment reliability the sensitivity analysis has been performed. Some parametric studies have also been included to obtain the results of field and academic interest.     

Effects of silver nanoparticles on thermal properties of DBSA-doped polyaniline/PVC blends

Dodecylbenzenesulfonic acid (DBSA)-doped polyaniline (PAND) has been synthesized by redoping (PANDR) and aqueous polymerization (PANDA) methods. Silver nanoparticles were incorporated into the PANDR/tetrahydrofuran solution (PANDS) and then mixed with poly (vinyl chloride) (PVC) solution to prepare PANDS/PVC nanocomposites. In the present study, effects of silver nanoparticles on thermal properties of PAND/PVC blends have been investigated by employing thermal gravimetric analysis and heat flow microcalorimetry techniques. From these results it has been observed that the thermal stability of blends have increased by increasing the concentration of PAND in blends and nanocomposites. Addition of silver nanoparticles has suppressed the dehydrochlorination process and evolution/degradation of DBSA in PANDS/PVC nanocomposites. Presence of silver nanoparticles in PAND/PVC nanocomposites has reduced the mobility of PANI chains which in turn inhibited the transfer of free radicals formed during degradation of PAND and PVC through inter-chain reactions; hence, degradation process has been slowed down and thermal stability has been improved. Embedment of silver nanoparticles has reduced thermal weight loss corresponding to polymer degradation step and attains lower heat flow level in inert atmosphere for nanocomposites in contrast to those with no nanoparticles, thereby further improving thermal stability of nanocomposites. The heats of oxidation measured for blends and nanocomposites were independent of PAND/PVC blends composition.     

Aggregate nonparametric safety analysis of traffic zones

Exploring the significant variables related to specific types of crashes is vitally important in the planning stage of a transportation network. This paper aims to identify and examine important variables associated with total crashes and severe crashes per traffic analysis zone (TAZ) in four counties of the state of Florida by applying nonparametric statistical techniques such as data mining and random forest. The intention of investigating these factors in such aggregate level analysis is to incorporate proactive safety measures in transportation planning. Total and severe crashes per TAZ were modeled to provide predictive decision trees. The variables which carried higher weight of importance for total crashes per TAZ were – total number of intersections per TAZ, airport trip productions, light truck productions, and total roadway segment length with 35 mph posted speed limit. The other significant variables identified for total crashes were total roadway length with 15 mph posted speed limit, total roadway length with 65 mph posted speed limit, and non-home based work productions. For severe crashes, total number of intersections per TAZ, light truck productions, total roadway length with 35 mph posted speed limit, and total roadway length with 65 mph posted speed limit were among the significant variables. These variables were further verified and supported by the random forest results.     

3D numerical investigation of ZnO/Zn hydrolysis for hydrogen production

The current research is focused on the hydrogen production through a two‐step ZnO/Zn thermochemical water splitting cycle. In the present paper, numerical modeling of the second step is conducted using Computational Fluid Dynamics (CFD)2, where steam reacts with zinc to produce hydrogen. The parametric study shows that the hydrogen yield is relatively insensitive to the steam/zinc molar ratio and inversely proportional to the argon/steam molar ratio. For large argon to steam molar ratios, hydrogen yield is relatively insensitive to the inlet temperature of zinc and steam, and increases marginally with an increase in the argon inlet temperature. Five different reactor configurations were evaluated comprehensively. Among all configurations, a cylindrical reactor with a tangential inlet for argon and zinc, and a radial inlet for steam (both in the bottom plane of the reactor) and a tangential outlet in the top plane of the reactor produced the highest hydrogen yield of 88%. Copyright © 2013 John Wiley & Sons, Ltd.