Quantitative preparation of long chain thioethers from an oxo-trans-2-enoic ester and a 9,12-dioxo-trans-10-enoic acid

Branched-chain thioethers have been prepared from methyl 4-oxo-trans-2-hexadecenoate and 9,12-dioxo-trans-10-octadecenoic acid. The reagents involved in these preparations were mercaptoacetic and mercaptopropionic acids. The yields of these thioethers are almost quantitative.     

Industrie 4.0 Readiness: Green Computing in Relation with Key Performance Indicator for a Manufacturing Industry

Mobile Networks and Applications - An effective measure of Key Performance Indicators (KPIs) is of great significance to enhance the capabilities of a decision support system (DSS) of any...     

Carrier Transport Enhancement Mechanism in Highly Efficient Antimony Selenide Thin-Film Solar Cell

Exhibiting outstanding optoelectronic properties, antimony selenide (Sb₂Se₃) has attracted considerable interest and has been developed as a light absorber layer for thin-film solar cells over the decade. However, current state-of-the-art Sb₂Se₃ devices suffer from unsatisfactory “cliff-like” band alignment and severe interface recombination loss, which deteriorates device performance. In this study, the heterojunction interface of an Sb₂Se₃ solar cell is improved by introducing effective aluminum (Al³⁺) cation into the CdS buffer layer. Then, the energy band alignment of Sb₂Se₃/CdS:Al heterojunction is modified from a “cliff-like” structure to a “spike-like” structure. Finally, heterojunction interface engineering suppresses recombination losses and strengthens carrier transport, resulting in a high efficiency of 8.41% for the substrate-structured Sb₂Se₃ solar cell. This study proposes a facile strategy for interfacial treatment and elucidates the related carrier transport enhancement mechanism, paving a bright avenue to overcome the efficiency bottleneck of Sb₂Se₃ thin-film solar cells.     

Optical GFDM: an improved alternative candidate for indoor visible light communication

Photonic Network Communications - This paper proposes generalized frequency division multiplexing (GFDM) for indoor visible light communication (VLC). GFDM is a flexible multi-carrier scheme that...     

A routing algorithm for reducing optical loss in photonic Networks-on-Chip

Driven by increase in automation, smart homes play an important role in today’s human life. This paper presents a new model for smart home technologies based on multi-device bidirectional visible light communication (VLC). For multiple devices and users, orthogonal code-based wavelength division (color beams) full-duplexed bidirectional VLC link is proposed. The color beams from RGB LEDs are utilized to transmit data and synchronize multi-device transmission. To enhance the performance of the proposed model, receiver diversity is also employed. Performance evaluation reveals that the proposed VLC-based model for smart homes is efficient with superior BER performance in a typical smart home environment except for the far corners. The maximum achievable data rate for each user up to four users is found to be 24 Mbps at both uplink and downlink transmissions.     

Effect of wafer thinning methods towards fracture strength and topography of silicon die

This paper characterizes die damage resulting from various wafer thinning processes. Die fracture strength is measured using ball breaker test with respect to die surface finish. Further study on surface roughness and topography of each surface finish is obtained by atomic force microscopy (AFM) and scanning electron microscopy (SEM) techniques. Stress relief process with 25 μm removal is able to strengthen 100 μm wafer by 20.4% using chemical wet etch and 75 μm wafer by 36.4% with plasma etch. Relatively, plasma etching shows higher fracture strength and flexibility compared to chemical wet etch. This is due to topography of the finished surface of plasma etch is smoother and rounded, leading to a reduced stress concentration, hence improved fracture strength.     

Deployable Structures Based on Buckling of Curved Beams Upon a Rotational Input

Inspired by the recent success of buckling-induced reconfigurable structures, a new class of deployable systems that harness buckling of curved beams upon a rotational input is proposed. First, experimental and numerical methods are combined to investigate the influence of the beam's geometric parameters on its non-linear response. Then, it is shown that a wide range of deployable architectures can be realized by combining curved beams. Finally, the proposed principles are used to build deployable furniture such as tables and lamp shades that are flat/compact for transportation and storage, require simple or no assembly, and can be expanded by applying a simple rotational input.     

A Zero-Pole Reposition Based, 0.95-mW, 68-dB,Linear-in-dB,Constant-Bandwidth Variable Gain Amplifier

A variable-gain amplifier with very low power consumption and wide tuning range is presented. The operational principle of this unique structure is discussed, its most important formulas are derived and its outstanding performance is verified by simulation in TSMC 0.18-μm N-well CMOS fabrication process. Owing to the novel zero-pole repositioning technique, the proposed circuit demonstrates very high frequency bandwidth of 79 MHz while drawing only 0.52 mA from 1.8 V power supply. The interesting results such as a very small core area of about 0.0025 mm² as well as a wide linear-in-dB and constant-bandwidth tuning range of 68.2 dB along with a very low power consumption of 0.95 mW are achieved utilizing standard CMOS technology. The stability of the proposed VGA is verified through transient sinusoidal response analysis. Full process, voltage and temperature (PVT) variation analysis of the circuit is also investigated through Monte Carlo and corner case analysis in order to approve the robustness of the structure. Monte Carlo simulations show standard deviation values of 4.6 dB and 78.3 MHz in gain and gain-bandwidth product, respectively. These results show that our zero-pole repositioning method would lend itself well for use in low-power and high-frequency applications, especially in high-speed automatic gain control amplifiers.     

Structural,Thermal and Luminescence Properties of AlN:Tm Thin Films Deposited on Silicon Substrate and Optical Fiber

Semiconductors - Thin films of AlN:Tm are deposited on a Si(111) and Si(100) substrates and optical fiber by rf magnetron sputtering method. 200–400 nm thick films are deposited at various...     

Classification of DoS Attacks in Smart Underwater Wireless Sensor Network

As per the most recent literature, Orthogonal Frequency Division Multiplexing (OFDM), a multi access technique, is considered most suitable for the 3G, 4G and 5G techniques in high speed wireless communication. What made OFDM most popular is its ability to deliver high bandwidth efficiency and superior data rate. Besides it, high value of peak to average power ratio (PAPR) and Inter Carrier Interference (ICI) are the challenges to tackle down via appropriate mitigation scheme. As a research contribution in the present work, an improved self-cancellation (SC) technique is designed and simulated through Simulink to mitigate the effect of ICI. This novel proposed technique (Improved SC) is designed over discrete wavelet transform (DWT) based OFDM and compared with conventional SC scheme over different channel conditions i.e. AWGN and Rayleigh fading environments. It is found that proposed DWT-OFDM with Improved SC scheme outperforms conventional SC technique significantly, under both AWGN and Rayleigh channel conditions. Further, in order to justify the novelty in the research contribution, a Split-DWT based Simulink model for Improved SC scheme is investigated to analyse the BER performance. This Split-DWT based Simulink model presented here foretells the future research potential in wavelet hybridization of OFDM to side-line ICI effects more efficiently.