Triclosan reactivity in chloraminated waters

Triclosan, widely employed as an antimicrobial additive in many household personal care products, has recently been detected in wastewater treatment plant effluents and in source waters used for drinking water supplies. Chloramines used either as alternative disinfectants in drinking water treatment or formed during chlorination of nonnitrified wastewater effluents have the potential to react with triclosan. This study examined triclosan reactivity in chloraminated waters over the pH range of 6.5-10.5. Experimental and modeling results show that monochloramine directly reacts with the phenolate form of triclosan; however, the reaction is relatively slow as evinced by the second-order rate constant k(ArO)-NH2Cl = 0.025 M(-1) s(-1). Kinetic modeling indicates that for pH values less than 9.5, reactions between triclosan and two monochloramine autodecomposition intermediates, hypochlorous acid (k(ArO)-HOC = 5.4 x 10(3) M(-1) s(-1)) and dichloramine (k(ArO)-NHCl2 = 60 M(-1) s(-1)), are responsible for a significant percentage of the observed triclosan decay. The products of these reactions include three chlorinated triclosan byproducts as well as 2,4-dichlorophenol and 2,4,6-trichlorophenol. Low levels of chloroform were detected after 1 week at pH values of 6.5 and 7.5. The slow reactivity of triclosan in the presence of chloramines explains the recalcitrance of this species in nonnitrified wastewater effluents.     

Simultaneous measurement of nitric oxide (NO) and nitrogen dioxide (NO2) in simulated automobile exhaust using medium pressure ionization-mass spectrometry

In previous papers we have demonstrated two different, two-color resonance-enhanced multiphoton ionization (REMPI) schemes for the simultaneous measurement of trace amounts (ppbV to pptV) of nitrogen monoxide (NO) and nitrogen dioxide (NO(2)). The goal of this study is to provide a laser ionization-mass spectrometric scheme capable of measuring ppmV to ppthV concentrations of NO and NO(2) within vehicle exhaust containing up to ppthV of aromatic hydrocarbons and a time frame of seconds. Two ionization schemes are used here to measure NO and NO(2) in simulated automobile exhaust with three different sources. REMPI Scheme 1 uses broad-bandwidth light and an effusive source to measure NO (limit of detection (LOD) 300 ppmV), NO(2) (LOD 100 ppmV), and aromatic hydrocarbons (via photoionization) along with fragments (via electron impact). REMPI Scheme 2 uses narrow-bandwidth light and a medium pressure laser ionization (MPLI) source to measure NO (LOD 60 ppmV), NO(2) (LOD 3 ppmV), and fragments (via electron impact). The LOD is determined using 10-second sampling times. A newly developed delayed-ion extraction technique for MPLI is then applied to REMPI Scheme 2, dramatically reducing the electron impact signal, so that only NO and NO(2) are observed. We conclude that Scheme 2 with delayed-electron extraction is best suited for measuring in situ NO and NO(2) within engine exhaust.     

An apporach to automatic three-dimensional finite element mesh generation

Recently developed solid modelling systems for the design of complex physical solids using interactive computer graphics offer the exciting possibility of an integrated design/analysis system. Called geometric modellers, these systems build complex solids from primitive solids (cubes, cylinders, spheres, solid patches, etc.) and macro solids (combination of primitives)^{3, 4, 8, 16, 18, 25, 38}. To provide an effective structural analysis capability for these systems, methods must be devised to ease the burden of discretizing the solid geometry into a user controlled (usually locally graded) finite element mesh. The purpose of this paper is to describe an interactive solid mesh generation system capable of generating valid meshes of well-proportional tetrahedral finite elements for the decomposition of multiply connected solid structures. The system uses a semi-automatic node insertion procedure to locate element node points within and on the surface of a structure. An independent automatic three-dimensional triangulator then accepts these nodes as input and connects them to form a valid finite element mesh oftetrahedral elements. Although this report makes use of a modeller based on a constructive solid geometry representation (a so-called CSG modeller), the mesh generation strategy elaborated herein is completely general and makes no particular use of the CSG representation.     

Improved Generation of Human Induced Pluripotent Stem Cell-Derived Cardiac Pacemaker Cells Using Novel Differentiation Protocols

Current protocols for the differentiation of human-induced pluripotent stem cells (hiPSC) into cardiomyocytes only generate a small amount of cardiac pacemaker cells. In previous work, we reported the generation of high amounts of cardiac pacemaker cells by co-culturing hiPSC with mouse visceral endoderm-like (END2) cells. However, potential medical applications of cardiac pacemaker cells generated according to this protocol, comprise an incalculable xenogeneic risk. We thus aimed to establish novel protocols maintaining the differentiation efficiency of the END2 cell-based protocol, yet eliminating the use of END2 cells. Three protocols were based on the activation and inhibition of the Wingless/Integrated (Wnt) signaling pathway, supplemented either with retinoic acid and the Wnt activator CHIR99021 (protocol B) or with the NODAL inhibitor SB431542 (protocol C) or with a combination of all three components (protocol D). An additional fourth protocol (protocol E) was used, which was originally developed by the manufacturer STEMCELL Technologies for the differentiation of hiPSC or hESC into atrial cardiomyocytes. All protocols (B, C, D, E) were compared to the END2 cell-based protocol A, serving as reference, in terms of their ability to differentiate hiPSC into cardiac pacemaker cells. Our analysis revealed that protocol E induced upregulation of 12 out of 15 cardiac pacemaker-specific genes. For comparison, reference protocol A upregulated 11, while protocols B, C and D upregulated 9, 10 and 8 cardiac pacemaker-specific genes, respectively. Cells differentiated according to protocol E displayed intense fluorescence signals of cardiac pacemaker-specific markers and showed excellent rate responsiveness to adrenergic and cholinergic stimulation. In conclusion, we characterized four novel and END2 cell-independent protocols for the differentiation of hiPSC into cardiac pacemaker cells, of which protocol E was the most efficient.     

Enhanced Liposomal Drug Delivery Via Membrane Fusion Triggered by Dimeric Coiled-Coil Peptides

An ideal nanomedicine system improves the therapeutic efficacy of drugs. However, most nanomedicines enter cells via endosomal/lysosomal pathways and only a small fraction of the cargo enters the cytosol inducing therapeutic effects. To circumvent this inefficiency, alternative approaches are desired. Inspired by fusion machinery found in nature, synthetic lipidated peptide pair E4/K4 is used to induce membrane fusion previously. Peptide K4 interacts specifically with E4, and it has a lipid membrane affinity and resulting in membrane remodeling. To design efficient fusogens with multiple interactions, dimeric K4 variants are synthesized to improve fusion with E4-modified liposomes and cells. The secondary structure and self-assembly of dimers are studied; the parallel PK4 dimer forms temperature-dependent higher-order assemblies, while linear K4 dimers form tetramer-like homodimers. The structures and membrane interactions of PK4 are supported by molecular dynamics simulations. Upon addition of E4, PK4 induced the strongest coiled-coil interaction resulting in a higher liposomal delivery compared to linear dimers and monomer. Using a wide spectrum of endocytosis inhibitors, membrane fusion is found to be the main cellular uptake pathway. Doxorubicin delivery results in efficient cellular uptake and concomitant antitumor efficacy. These findings aid the development of efficient delivery systems of drugs into cells using liposome-cell fusion strategies.     

Intramolecular Diels-Alder reactions. 5 [1] Facile synthesis of an octahydrobenzocycloheptenone derivative utilising intramolecular Diels-Alder reaction

Undecatrienone 4 was prepared in a short sequence via siloxycyclopropanes 1 and 3 . Intramolecular Diels-Alder reaction (IMDA) of 4 under various conditions afforded octahydrobenzocycloheptenone derivative 5 as a mixture of three or four diastereomers. High diastereoselectivities in favour of the endo-product cis- 5a could be obtained with TiCl₄ as promoter. This selectivities were attriuted to the formation of a seven-membered ring chelate as intermediate. The configurational assignment of all four diastereomers of 5 was based on isomerisation reactions and NMR analysis.