Methanol Selective Oxidation to Formaldehyde over Iron-Molybdate Catalysts

This review deals with the important industrial reaction of formaldehyde manufacture by methanol oxidation over iron molybdate catalysts. Detailed reference is made to the used catalyst, preparation techniques (coprecipitation, sol-gel like, mechanical mixing, etc.) including unsupported and supported catalysts, promoters and characterization methods. The controversial active phase assignment (stoichiometric versus Mo rich iron molybdate) is discussed. The proposed reaction mechanisms and kinetic laws for the main and side reactions are examined. The catalyst deactivation processes are reviewed and the role of Mo excess on these processes is underlined. Finally conclusions and perspectives are presented.     

Accurate determination of hexanal in beef bouillons by headspace solid‐phase microextraction gas‐chromatography mass‐spectrometry

Lipid oxidation has great impact on the quality of food products through flavor and taste deterioration, reduction in nutritive value, and potential toxicity of the oxidized food components. Flavor and taste deterioration can be easily perceived and it represents one of the major causes of consumer complaints in the food industry. The deterioration of sensory properties is due to the decomposition products of hydroperoxides that easily isomerize and degrade into volatile compounds. Volatile products are responsible for flavor and taste deterioration. In this study, we present the development of the solid‐phase microextraction gas chromatography‐mass spectrometry (SPME‐GC‐MS) technique to quantify low amounts (μg/g range) of secondary oxidation products, i.e. hexanal. The optimization of SPME parameters is a difficult task because of the possibility of further formation of volatile products during analysis. Different parameters such as type of fiber, exposure time of the fiber to the sample headspace and the optimal temperature of absorption have also been investigated. The complete validation of the method was achieved by the determination of linearity, limits of detection and quantification and repeatability. We demonstrated that the SPME method is a valuable tool for the quantification of low amounts of secondary oxidation products such as hexanal. Therefore, this technique can be used to detect early formation of volatiles.     

Study of effect of old corrugated cardboard in properties of polypropylene composites: Study of mechanical properties,thermal behavior,and morphological properties

The investigation of the economical use of lignocellulose waste, which is one of the environmental problems facing nations, is ongoing. In this study, waste cardboard paper fiber reinforcing polypropylene (PP) composites was developed. In order to modify the PP matrix maleated PP (MA‐g‐PP) a 5 wt% and a grafting rate of 1 and 2 wt% was used as a compatibilizer. The effects of fiber and compatibilizer content as well as graft content are evaluated by mechanical, thermal property measurements, and scanning electron microscopy (SEM). The compatibilizer improved all mechanical properties significantly. Thus, the tensile strength of MA‐g‐PP‐containing composites increases compared to PP/cardboard composites paper content increases. However, the tensile modulus of a PP‐based composite increases with an increase in paper fiber with the compatibilizer having little effect. SEM revealed that the addition of MA‐g‐PP generates strong interactions between a PP matrix and paper fibers. However, the addition of the MA‐g‐PP compatibilizing agent gives a significant improvement on the crystallization of the composites, whereas the compatibilized PP/old corrugated cardboard (OCC) composites have higher crystallinity (Xc) than uncompatibilized PP/OCC composites. The MA‐g‐PP also diminished the water absorption in the composites. J. VINYL ADDIT. TECHNOL., 22:231–238, 2016. © 2014 Society of Plastics Engineers     

Matrix-filler interactions in a co-ground ecocomposite: Surface properties and behaviour in water

Ecocomposites made up of polystyrene and starch were produced by co-grinding. The mechanism by which the composite is formed was identified by following the particle size and morphology. The size reduction of the matrix particles is favoured by the presence of starch which adheres on polystyrene surface, playing the role of agglomeration inhibitor between matrix particles. Thus, the filler is well dispersed in the matrix, permitting a good homogeneity of the composite properties. The hydrophilic behaviour of starch is reduced by co-grinding, resulting of a decrease of the acid and non dispersive components of the surface energies. Consequently the interactions between the initially hydrophobic matrix and hydrophilic filler are enhanced without using a compatibilizer. Thus, the water-resistance of the co-ground composite materials is better compared to blends since blends pellets introduced in water are rapidly disintegrated while an adapted co-grinding time permits to avoid this problem. It was seen that the diffusion coefficient of water in the composite pellets decreases with an increase of the co-grinding time for the lower filler rates, while it is the opposite for high filler rates. Moreover, the diffusion coefficient increases with the filler ratio.     

Preparation of nanocomposite dispersions based on cellulose whiskers and acrylic copolymer by miniemulsion polymerization: Effect of the silane content

A one‐step method was used to prepare stable aqueous nanocomposite dispersions based on cellulose whiskers extracted from the rachis of the date palm tree and a poly(styrene‐co‐2‐ethyl hexylacrylate) copolymer via miniemulsion polymerization. A reactive silane, i.e., methacryloxypropyl triethoxysilane was added to stabilize the dispersion and favor the anchoring of the whiskers on polymer particles. Dynamic light scattering was used to study the effect of the silane and whiskers contents on the average particle size of the polymer. Nanocomposites materials were prepared from these dispersions using a casting/evaporation method. The effect of the silane and whiskers contents on the thermal and mechanical properties were studied using differential scanning calorimetry and dynamic mechanical analysis. POLYM. ENG. SCI., 2011. © 2010 Society of Plastics Engineers     

Extrusion of Nanocellulose‐Reinforced Nanocomposites Using the Dispersed Nano‐Objects Protective Encapsulation (DOPE) Process

Cross‐linked alginate capsules a few millimeters in diameter have been formed by immersion in a CaCl₂ solution. When adding cellulose whiskers or microfibrillated cellulose to the aqueous alginate solution, nanocomposite capsules containing 40 wt.% cellulosic nanoparticles were obtained. The morphology and compression strength of these capsules were investigated by microscopic observations and crushing tests, respectively. The capsules were extruded with a thermoplastic polymer. Visual inspection of the ensuing films shows a nonhomogeneous dispersion of the capsules that kept their integrity after extrusion. It results in preliminary disappointing mechanical properties of the composite films. However, further investigation is in progress to optimize this simple and ecofriendly process.

     

Solvent effect modelling of isocyanuric products synthesis by chemometric methods

Chemometric tools were used to generate the modelling of solvent e inverted exclamation markects on the N-alkylation of an isocyanuric acid salt. The method proceeded from a central composite design applied on the Carlson solvent classification using principal components analysis. The selectivity of the reaction was studied from the production of different substituted isocyanuric derivatives. Response graphs were obtained for each compound and used to devise a strategy for solvent selection. The prediction models were validated and used to search for the best selectivity for the reaction system. The solvent most often selected as the best for the reaction is the N,N-dimethylformamide.     

Feedback linearizing control of a fluidized bed reactor

The design of an adaptive nonlinear controller for the control of a fluidized bed reactor is derived by using exact linearization techniques. Reset action and parameter adaptation are used to make more robust the precise compensation of nonlinear terms, which is called for in the linearization technique. A nonlinear antiwindup mechanism is introduced to handle reset windup problem and to provide fast response without large overshoot. Simulation results show that the proposed adaptive controller guarantees good setpoint tracking. The developed estimation algorithm allows accurate estimation of the parameters for which the regressor component is not zero.