Interface fracture toughness in thermal barrier coatings by cross-sectional indentation

The interface fracture toughness of thermal barrier coatings (TBCs) on high-pressure turbine blades manufactured by electron beam physical vapour deposition was measured by a cross-sectional indentation (CSI) method. Scanning electron microscopy and luminescence mapping were employed to reveal that coating delamination induced by CSI was predominantly along the thermally grown oxide–bond coat interface and the shape of the delaminated area was approximately semicircular. The critical energy release rate (G_c) for delamination was calculated based on a clamped circular plate model. Analysis of the stored energy release revealed that the residual stresses in the coating do not contribute to the total energy release rate provided that the delaminated area of the coating does not buckle. Therefore, for this method, detailed information of residual stresses is not necessary for the determination of interface fracture toughness. However, intercolumnar microfracture and shear displacement in the YSZ top coat can lead to significant overestimation of the interface fracture toughness in some situations. A method of specimen preparation is described to inhibit these effects. The interface fracture resistance of the TBCs was found to be 29 ± 9 J m^?2 after between 35 and 100 thermal cycles (from room temperature to 1150 °C with 1 h duration).     

Analytic solution for planar indeterminate impact problems using an energy constraint

This work proposes an analytic method for resolving planar multi-point indeterminate impact problems for rigid-body systems. An event-based approach is used to detect impact events, and constraints consistent with the rigid-body assumption are used to resolve the indeterminacy associated with multi-point impact analysis. The work-energy relation is utilized to determine post-impact velocities based on an energetic coefficient of restitution to model energy dissipation, thereby yielding an energetically consistent set of post-impact velocities based on Stronge’s energetic coefficient of restitution for the treatment of rigid impacts. The effect of stick–slip transition is analyzed based on Coulomb friction. This paper also discusses the transition from impact to contact. This analysis is essential for considering the rocking block problem that is used as an example herein. The predictions of the model for the rocking block problem are compared to experimental results published in the literature. An example of a planar ball undergoing two-point impact is also presented.     

Network level bridges maintenance planning using Multi-Attribute Utility Theory

Bridge infrastructure managers are facing multiple challenges to improve the availability and serviceability of ageing infrastructure, while the maintenance planning is constrained by budget restrictions. Many research efforts are ongoing, for the last few decades, ranging from development of bridge management system, decision support tools, optimisation models, life cycle cost analysis, etc. Since transport infrastructures are deeply embedded in society, they are not only subject to technical requirements, but are required to meet the requirements of societal and economic developments. Therefore, bridge maintenance planning should accommodate multiple performance goals which need to be quantified by various performance indicators. In this paper, an application of Multi-Attribute Utility Theory (MAUT) for bridge maintenance planning is illustrated with a case study of bridges from the Netherlands road network. MAUT seeks to optimise multiple objectives by suggesting a trade-off among them and finally assigns a ranking to the considered bridges. Moreover, utility functions of MAUT appropriately account for the involved uncertainty and risk attitude of infrastructure managers. The main contribution of this study is in presenting a proof-of-concept on how MAUT provides a systematic approach to improve the decision-making of maintenance planning by making use of available data, accommodating multiple performance goals, their uncertainty, and preferences of infrastructure managers.     

Sources and Bioactive Properties of Conjugated Dietary Fatty Acids

The group of conjugated fatty acids known as conjugated linoleic acid (CLA) isomers have been extensively studied with regard to their bioactive potential in treating some of the most prominent human health malignancies. However, CLA isomers are not the only group of potentially bioactive conjugated fatty acids currently undergoing study. In this regard, isomers of conjugated α‐linolenic acid, conjugated nonadecadienoic acid and conjugated eicosapentaenoic acid, to name but a few, have undergone experimental assessment. These studies have indicated many of these conjugated fatty acid isomers commonly possess anti‐carcinogenic, anti‐adipogenic, anti‐inflammatory and immune modulating properties, a number of which will be discussed in this review. The mechanisms through which these bioactivities are mediated have not yet been fully elucidated. However, existing evidence indicates that these fatty acids may play a role in modulating the expression of several oncogenes, cell cycle regulators, and genes associated with energy metabolism. Despite such bioactive potential, interest in these conjugated fatty acids has remained low relative to the CLA isomers. This may be partly attributed to the relatively recent emergence of these fatty acids as bioactives, but also due to a lack of awareness regarding sources from which they can be produced. In this review, we will also highlight the common sources of these conjugated fatty acids, including plants, algae, microbes and chemosynthesis.     

Staffing the Microcomputer Resource Center

The information systems industry seems to invent itself out of business every three to five years. To survive, MIS managers must master the newly devised ideas and technologies. Three topics of current (and seemingly enduring) interest are expert systems, communications, and office automation.     

Digital business reporting standards: mapping the battle in France

Government agencies use information technology extensively to collect business data for regulatory purposes. Data communication standards form part of the infrastructure with which businesses must conform to survive. We examine the development of, and emerging competition between, two open business reporting data standards adopted by government bodies in France; Electronic Data Interchange for Administration, Commerce and Transport (EDIFACT) (incumbent) and eXtensible Business Reporting Language (XBRL) (challenger). The research explores whether an incumbent may be displaced in a setting in which the contest is unresolved. Latour's translation map is applied to trace the enrollments and detours in the battle. We find that regulators play an important role as allies in the development of the standards. The antecedent networks in which the standards are located embed strong beliefs that become barriers to collaboration and fuel the battle. One of the key differentiating attitudes is whether speed is more important than legitimacy. The failure of collaboration encourages competition. The newness of XBRL's technology just as regulators need to respond to an economic crisis and its adoption by French regulators not using EDIFACT create an opportunity for the challenger to make significant network gains over the longer term. ANT also highlights the importance of the preservation of key components of EDIFACT in ebXML.     

Simulation and experimental investigation of two hybrid solar domestic water heaters with drain water heat recovery

In this paper, the performance of two solar domestic hot waters (SDHW) with drain water heat recovery (DWHR) units is investigated. Both SDHW systems are recently installed at the Archetype Sustainable Twin Houses at Kortright Center, Vaughan, Ontario. The first SDWH system in House A consists of a flat plate solar thermal collector in combination with a gas boiler and a DWHR unit. The second SDHW system in House B includes an evacuated tube solar collector, an electric tank, and a DWHR unit. Both systems are modeled in TRNSYS, and the models are validated by experimental data. The addition of the DWHR and the flat‐plate solar thermal collector would result in 1831 kWh of annual energy saving in House A. While the addition of the DWHR and the evacuated tube collector in House B would result in an annual energy saving of 1771 kWh. Subsequently, the models are used to investigate the performance of similar systems for five major Canadian cities of Halifax, Montreal, Toronto, Edmonton, and Vancouver. The conjunctions of solar thermal collectors with DWHR units are found most beneficial in Edmonton. It is also noted from experimental and simulated results that flat‐plate solar collector‐based water heater produced more thermal energy than the system based on the evacuated tube solar collector for all major Canadian cities. Copyright © 2015 John Wiley & Sons, Ltd.