GaAs pHEMT-based technology for microwave applications in a volume MMIC production environment on 150-mm wafers

The establishment of a 150-mm (6-in) gallium arsenide (GaAs) facility is described together with the development of very high yielding and cost-effective semiconductor device technologies and a manufacturing capacity of over 40000 wafers/annum. The background to the demand for very high volumes of RF products for this market is discussed, together with the prospects for future growth. The paper describes recent process development by the utilization of a data-driven yield management system to support the delivery of high-quality RF products to customers. Finally, "end of line" DC and RF testing of finished 150-mm GaAs pHEMT foundry wafers is described, enabling scalar measurements of power, noise, and intermodulation products as well as vector measurements of S-parameters and noise parameters at frequencies of up to 40 GHz.     

Foveation-Based Error Resilience and Unequal Error Protection over Mobile Networks

By exploiting new human-machine interface techniques, such as visual eyetrackers, it should be possible to develop more efficient visual multimedia services associated with low bandwidth, dynamic channel adaptation and robust visual data transmission. In this paper, we introduce foveation-based error resilience and unequal error protection techniques over highly error-prone mobile networks. Each frame is spatially divided into foveated and background layers according to perceptual importance. Perceptual importance is determined either through an eye tracker or by manually selecting a region of interest. We attempt to improve reconstructed visual quality by maintaining the high visual source throughput of the foveated layer using foveation-based error resilience and error correction using a combination of turbo codes and ARQ (automatic reQuest). In order to alleviate the degradation of visual quality, a foveation based bitstream partitioning is developed. In an effort to increase the source throughput of the foveated layer, we develop unequal delay-constrained ARQ (automatic reQuest) and rate compatible punctured turbo codes where the punctual pattern of RCPC (rate compatible punctured convolutional) codes in H.223 Annex C is used. In the simulation, the visual quality is significantly increased in the area of interest using foveation-based error resilience and unequal error protection; (as much as 3 dB FPSNR (foveal peak signal to noise ratio) improvement) at 40% packet error rate. Over real-fading statistics measured in the downtown area of Austin, Texas, the visual quality is increased up to 1.5 dB in PSNR and 1.8 dB in FPSNR at a channel SNR of 5 dB.     

The nature and role of incoherent interphase interfaces in diffusional solid-solid phase transformations

In this article, some views on the nature of incoherent interphase interfaces, and their role in the nucleation and growth processes governing the evolution of microstructure in solid-state diffusional transformations (reconstructive transformations), are explored. It is argued that essentially incoherent interfaces can be involved in the initiation and propagation of polymorphic transformations and massive transformations as well as in various precipitation phenomena in metallic and ceramic systems. Similar views have already been advanced earlier in connection with studies of massive transformations. Faceting along the interphase interface during nucleation and growth can derive from thermodynamic, kinetic, and crystallographic factors independent of the bicrystallography of the conjugate phases. This idiomorphic behavior can be relevant to both intergranular and intragranular phase formation. The concept of one-dimensional (1-D) commensuration of phases through plane edge-to-edge/row matching is an interesting extension of the classic ideas of coherency and bicrystallography and potentially important in characterizing the behavior of certain types of boundaries. However, the general importance of these geometrical relations in real and reciprocal space will depend on the depth of the energy wells in orientation space associated with these special boundaries. This article is based on a presentation made in the “Hume-Rothery Symposium on Structure and Diffusional Growth Mechanisms of Irrational Interphase Boundaries,” which occurred during the TMS Winter meeting, March 15–17, 2004, in Charlotte, NC, under the auspices of the TMS Alloy Phases Committee and the co-sponsorship of the TMS-ASM Phase Transformations Committee.     

Computers and translation: integrating IT into undergraduate foreign language learning

Abstract There are still many institutions of higher education in the UK, both universities and polytechnics, that have not taken on board the application of information technology to foreign language learning. Apart from considerations of cost, there is also the problem of time—deciding how best to use the limited time at one's disposal for exploring computer applications to foreign language learning. Both problems may be compounded by the mistaken belief that effective use of this 'new' technology necessarily involves learning one or more programming languages. This paper endeavours to show that recent advances in both software and hardware have produced computing tools of particular interest to translation and the translator, and that, since translation is a reality for large numbers of undergraduates in the UK, such tools represent an obvious starting point for the introduction of IT into the undergraduate curriculum.     

Effects of soil erosion on water quality and water uses in the upper Phong watershed.

The main objective of this paper is to simulate the effects of soil erosion on river water quality and on agricultural production as a result of the transformation of forestlands in the catchment of the upstream Phong River. Suspended solids carry down attached nutrients and agricultural chemicals causing water pollution in the downstream. There are four different types of land use in this simulation, namely forestlands, flatland and highland sugarcane plantation areas, and paddy fields. The highest mean annual amount of soil erosion is from paddy fields (585,700 tons/year), followed by highland (73,800 tons/year) and flatland (63,950 tons/year) sugarcane plantation areas and forestlands (41,800 tons/year), respectively. However, as most of paddy fields are located in a low land and are wet type cultivations, the soil erosion occurred has less impact on river water quality and its production compared to the soil erosion from the steeper slopes of highland plantation areas. Under the resource-based agriculture, the sugarcane production is mainly increased by expanding the plantation areas leading to a significant loss of topsoil and a considerable reduction of agricultural production. Soil erosion contributes to an increase in the average annual suspended solids concentration by 72 mg/l.     

Hydrogenated amorphous silicon thin-film transistor arrays fabricated by digital lithography

A jet-printed digital-lithographic method, in place of conventional photolithography, was used to fabricate 64 /spl times/ 64 pixel (300 /spl mu/m pitch) matrix addressing thin-film transistor (TFT) arrays. The average hydrogenated amorphous silicon TFT device within an array had a threshold voltage of /spl sim/3.5 V, carrier mobility of 0.7 cm/sup 2//V/spl middot/s, subthreshold slope of 0.76 V/decade, and an on/off ratio of 10/sup 8/.     

Reliability assessment of polysilicon MEMS structures under mechanical fatigue loading

This paper examines the current status and methodologies of study of material and system reliability in Microelectromechanical Systems (MEMS). This includes: a review of the current literature in the area of MEMS regarding failure analysis experimental investigations; testing methods and philosophies for material characterization and possible mechanistic analytical solutions for estimating material properties. The paper proposes a reliability framework that encompasses all the available information. This statistical platform will enable the MEMS design engineer to distill all the available information in the literature into a stand-alone semi-empirical material reliability model, and a holistic system-level model for a complete system.     

Ethernet-based passive optical local-area networks for fiber-to-the-desk application

We introduce optical local-area network (LAN) architectures based on multimode optical fiber and components, short wavelength lasers and detectors, and the widely used fast Ethernet protocol. These architectures are designed to lower the costs associated with passive optical LAN implementation. Further reduction in overall cost is achieved through decreased network downtime, lower maintenance cost, extended geometrical spans, and larger headroom for future capacity increase. These optically transparent networks represent a novel approach for implementing fiber-to-the-desk.     

Experimental evaluation of velocity and power estimation forultrasound blood flow imaging, by means of a two-dimensionalautocorrelation approach

This paper evaluates experimentally the performance of a novel axial velocity estimator, the 2D autocorrelator, and its Doppler power estimation counterpart, the 2D zero-lag autocorrelator, in the context of ultrasound color flow mapping. The evaluation also encompasses the well-established 1D autocorrelation technique for velocity estimation and its corresponding power estimator (1D zero-lag autocorrelator), to allow performance comparisons under identical conditions. Clutter-suppressed in vitro data sets from a steady-flow system are used to document the effect of the range gate and ensemble length, noise level and angle of insonation on the precision of the velocity estimates. The same data sets are used to examine issues related to the estimation of the Doppler signal's power. The first-order statistics of power estimates from regions corresponding to flow and noise are determined experimentally and the ability of power-based thresholding to separate flow signals from noise is characterized by means of ROC analysis. In summary, the results of the in vitro evaluation show that the proposed 2D-autocorrelation form of processing is consistently better than the corresponding 1D-autocorrelation techniques, in terms of both velocity and power estimation. Therefore, given their relatively modest implementation requirements, the 2D-autocorrelation algorithms for velocity and power estimation appear to represent a superior, yet realistic, alternative to conventional Doppler processing for color flow mapping