Deterministic and stochastic assessment of the harmonic currents consumed by discharge lamps

The paper examines the deterministic and stochastic behavior of magnetic ballast discharge lamps. Expressions to deterministically calculate the harmonic currents of discharge lamps are provided and analytical expressions of the probability density functions of these harmonic currents are obtained. The results are validated with experimental measurements.     

Permeability of high-performance concrete subjected to elevated temperature (600 °C)

Permeability is one of the most important parameters to quantify the durability of high-performance concrete. Permeability is closely related with the spalling phenomenon in concrete at elevated temperature. This parameter is commonly measured on non-thermally damaged specimens. This paper presents the results of an experimental investigation carried out to study the effect of elevated temperature on the permeability of high-performance concrete. For this purpose, three types of concrete mixtures were prepared: (i) control high-performance concrete; (ii) high-performance concrete incorporating polypropylene fibres; and (iii) high-performance concrete made with lightweight aggregates. A heating–cooling cycle was applied on 160 × 320 mm, 110 × 220 mm, and 150 × 300 mm cylindrical specimens. The maximum test temperature was kept as either 200 or 600 °C. After the thermal treatment, 65 mm thick slices were cut from each cylinder and dried prior to being subjected to permeability test. Results of thermal gradients in the concrete specimens during the heating–cooling cycles, compressive strength, and splitting tensile strength of concrete mixtures are also presented here. A relationship between the thermal damage indicators and permeability is presented.     

Effect of Pre-heat and Inert Gas Species on Cryogenic Aerosol Cleaning Performance in Semiconductor Manufacturing

Cryogenic aerosol cleaning is a dry cleaning method used in the back end of line (BEOL) semiconductor manufacturing to remove defects from planar hydrophobic surfaces such as SiCOH and SiCxNyHz. Cryogenic aerosol cleaning is preferred over conventional wet cleaning methods as it is a non-contact cleaning method, which uses inert gases to generate sub-micrometer-sized solid aerosol particles that physically remove nanometer-sized contaminants on wafer surfaces. Particle removal mechanism involves detachment of the particles upon impact with aerosol, diffusion, and finally entrainment away from the wafer. In BEOL metal line patterning, particles on the dielectric isolation surfaces translate through the subsequent lithography and copper fill steps in to single or multiple metal line open defects that are yield killers. In this study, we show that the particle removal performance of the standard aerosol cleaning can be enhanced by pre-heating the wafer and use of a higher molecular weight inert gas, namely Ar, for aerosol generation. Both the addition of a Pre-heat step and the use of Ar as the aerosol source showed 47–52% reduction in single and multiple line opens detected through wafer electrical tests during high volume semiconductor manufacturing process.     

k‐strong privacy for radio frequency identification authentication protocols based on physically unclonable functions

This paper examines Vaudenay's privacy model, which is one of the first and most complete privacy models that featured the notion of different privacy classes. We enhance this model by introducing two new generic adversary classes, k‐strong and k‐forward adversaries where the adversary is allowed to corrupt a tag at most k times. Moreover, we introduce an extended privacy definition that also covers all privacy classes of Vaudenay's model. In order to achieve highest privacy level, we study low cost primitives such as physically unclonable functions (PUFs). The common assumption of PUFs is that their physical structure is destroyed once tampered. This is an ideal assumption because the tamper resistance depends on the ability of the attacker and the quality of the PUF circuits. In this paper, we have weakened this assumption by introducing a new definition k‐resistant PUFs. k‐PUFs are tamper resistant against at most k attacks; that is, their physical structure remains still functional and correct until at most k^th physical attack. Furthermore, we prove that strong privacy can be achieved without public‐key cryptography using k PUF‐based authentication. We finally prove that our extended proposal achieves both reader authentication and k‐strong privacy. Copyright © 2014 John Wiley & Sons, Ltd.     

Tow impregnation during resin transfer molding of bi-directional nonwoven fabrics

A model has been developed for analyzing resin impregnation of fiber tows during resin transfer molding of bi-directional nonwoven fiber performs. The model is based on the existence of two main regions of resin flow: the macropore space formed among fiber tows and the micropore space formed among individual fiber filaments within a tow. The large difference in permeability between these two regions of flow leads to the potential for void formation during resin transfer molding. The model was formulated for both constant flow rate and constant pressure mold filling. For ambient pressure mold filling, the model predicts a difference in the size of the voids and distribution between axial tows (oriented along the flow direction) and transverse tows (oriented in the transverse direction). When vacuum is imposed on the mold, the model predicts the same resin impregnation behavior for both axial and transverse tows. Furthermore, given sufficient time, voids generated under vacuum mold filling will eventually collapse because of the absence of an opposing internal void pressure. In addition to insights on void formation, the model also provides a basis for the study of the relationship between resin transfer molding parameters and the resin impregnation process.     

Diazoverbindungen. 72. (Diazoalkyl)phosphane – Synthese durch elektrophile Diazoalkansubstitution und oxidative Additionsreaktionen am Phosphor

Diazo Compounds. 72. Diazoalkylphosphanes – Synthesis by Electrophilic Diazoalkane Substitution and Oxidative Addition Reactions at Phosphorus Electrophilic diazoalkane substitution of the diazomethyl compounds 1a,b with the chloro phosphanes 2a-o in the presence of lithium diethylamide yields the diazoalkyl phosphanes 3a-z . Oxidative addition of oxygen, sulfur and selenium at phosphorus leads into the series of oxo, thioxo and selenoxo phosphanes having diazoalkyl substituents ( 4a-d, 5a-m and 7a-d ). The silyl group of 5n,o is cleaved by chromatography on aluminium oxide to yield the (diazomethyl)phosphane sulfides 6a,b .     

Reactions of TATB-Based Explosive with Molten Metal

The reactions of combustion products (CO, H₂O) from the insensitive high explosive LX-17 (92.5 wt% 1,3,5-triamino-2,4,6-trinitrobenzene (TATB), 7.5 wt% Kel-F 800 binder) with molten metal (75 a%Nd, 25 a% Fe) were studied, to determine their contribution to the energy release rate of deflagrating LX-17, Kinetic data taken with gas mixtures of CO and H₂O, and larger-scale tests with LX-17, showed that the reactions were slow and incomplete and that there was no significant contribution to the energy release rate. From the tests with JX-17, the effective flame temperature and burn velocity were dependent on confinement of gas products. LX-17 preheated to 500 K - 510 K showed effective flame temperatures of 1100 K - 1400 K and burn rates of 0.08–0.11 mm/s, depending on the extent of gas confinement by the molten metal.     

Elastic modulus of in-situ composites of a liquid crystalline polymer and polycarbonate

In this paper, we model the elastic modulus of in-situ composite fibers from polymer blends where a fibrous liquid crystalline polymer (LCP) phase is induced by drawing. We propose a composite model to account for the change of the elastic moduli of the reinforcing LCP phase with the draw ratio of the composite fibers. We envisage the LCP phase as a composite of a perfectly oriented chain aggregate and a randomly oriented chain aggregate which are connected in series. We then derive equations for the longitudinal and the transverse elastic moduli of the composite fibers based on the well-known Halpin-Tsai equation and the composite model of the reinforcing LCP phase. Using this approach, we are able to make a number of predictions including the transverse elastic modulus and mechanical anisotropy. Our results show that theoretical predictions of the longitudinal elastic modulus agree fairly well with experimental results for polycarbonate/Vectra composites. The proposed modulus equations will be useful in providing guidelines for fabrication and applications of this new class of polymeric materials.