Enzymatic synthesis of sugar esters and their potential as surface-active stabilizers of coconut milk emulsions

Sugar esters are compounds with surfactant properties (biosurfactants), i.e., capable of reducing the surface tension and promote the emulsification of immiscible liquids. On the other hand, as with all emulsions, coconut milk is not physically stable and is prone to phase separation. Therefore, the aim of this work was to evaluate the synthesis of fructose, sucrose and lactose esters from the corresponding sugars using Candida antarctica type B lipase immobilized in two different supports, namely acrylic resin and chitosan, and evaluate its application in the stabilization of coconut milk emulsions. The enzyme immobilized on chitosan showed the highest yield of lactose ester production (84.1%). Additionally, the production of fructose ester was found to be higher for the enzyme immobilized on the acrylic resin support (74.3%) as compared with the one immobilized on chitosan (70.1%). The same trend was observed for the sucrose ester, although with lower percentage yields. Sugar esters were then added to samples of fresh coconut milk and characterized according to their surface tension, emulsification index and particle size distribution. Although the microscopic analysis showed similar results for all sugar esters, results indicated lactose ester as the best biosurfactant, with a surface tension of 38.0 N/m and an emulsification index of 54.1%, when used in a ratio of 1:10 (biosurfactant:coconut milk, v/v) for 48 h experiments.     

Statistical analysis of achievable resolution limit in the near field source localization context

In this fast communication, we derive the statistical resolution limit (SRL), characterizing the minimal parameter separation, to resolve two closely spaced known near-field sources impinging on a linear array. Toward this goal, we conduct on the first-order Taylor expansion of the observation model a Generalized Likelihood Ratio Test (GLRT) based on a Constrained Maximum Likelihood Estimator (CMLE) of the SRL. More precisely, the minimum separation between two near-field sources, that is detectable for a given probability of false alarm and a given probability of detection, is derived herein. Finally, numerical simulations are done to quantify the impact of the array geometry of the signal sources power distribution and of the array aperture on the statistical resolution limit.     

Thermally induced microstructure and morphology transformations in molybdenum disulfide–octadecyltrimethylammonim layered nanocomposite

Microstructure of layered nanocomposite compound consisting of molybdenum disulfide single layers and the layers of octadecyltrimethylammonium molecules as well as the structure of destruction products of this hybrid compound were studied by high resolution transmission electron microscopy (HRTEM) and powder X-ray diffraction (XRD) techniques. Changes in composition, ordering and morphology of the host and guest layers of the compound occurring due to release of organic guest from the interlayer space of MoS₂ on heating or on action of electronic beam have been revealed. Removal of the guest was found to initiate formation in the initial layered structure of the packets consisting of a few MoS₂ layers which come close together within the distances of ca. 1–1.5 nm and 0.6–0.7 nm after heating at 250 °C and 400 °C, respectively. Leaving the guest also causes deformations of MoS₂ layers resulting in their non-flat geometry. At 400 °C, strong bending of a part of the sulfide layers with the radius as small as 3–4 nm was observed.     

Synthesis of AlN nanopowder coated with a thin layer of C,using a thermal plasma reactor

High-purity nanocrystalline aluminum nitride powders were synthesized by using a 12?kW non-transferred arc plasma. The synthesis was conducted in a versatile, new designed, one-chamber thermal plasma reactor (TPR). The novel experimental assembly incorporated better working conditions like: high temperature gradient between the crucible and reactor's wall, and high super-saturation of the system by nitrogen and carbon. Thermodynamic modelling of the synthesis was conducted in order to achieve the best conditions for AlN formation. In this study, aluminum discs of Al 1100 were used as precursor material and pure nitrogen was the only gas used as reagent and plasmogenic gas.Nanopowders collected from reactor's wall were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-Ray diffraction (XRD). Synthesized h-AlN nano-powders were found to be free of oxides and aluminum metal. A thin carbon-layer around the particles was detected. TEM results indicated that the carbon-layer was around 5 and 10?nm. This outcome could make a significant difference with other synthesis reported in the literature since the occurrence of the carbon-layer, could delay AlN oxidation, prevent hydration, and could avoid the agglomeration of the particles.     

Influence of Copper Layer Content in the Elastic and Damping Behavior of Glass-Fiber/Epoxy-Resin Composites

The impact in the elastic behavior and internal friction, caused by the introduction of Copper layers in Glass-Fiber/Epoxy Resin composites and temperature effects, were studied and evaluated recurring to Dynamic Mechanical Analysis. It is shown that the introduction of Copper layers increases the storage modulus of the composites and delays their glass transition temperature, however, it allows a faster transformation. Additionally, it is concluded that the introduction of Copper layers elevates the internal friction during the glass transition phase by the inversion of the deformation mechanism due to thermal expansion and increase in the Poisson’s ratio of the epoxy resin to a value near 0.5 where its deformation is approximately isochoric. This increase in damping capacity is relevant in application with cyclic fatigue and mechanical vibration.     

Virtual RF system platform dedicated to heterogeneous complex SoC design

In this paper, we propose to develop a hierarchical library associated with various simulators that can be used in a single platform, called TrustMe-ViP, which enables a unique simulation framework and full model interoperability. Such platform is dedicated to complex SoC design, such as trusted personal devices where cost and time-to-market are very important constraints. To validate this methodology, we present the estimation of BER and power consumption for a Bluetooth transceiver.     

Spray drying conditions for orange juice incorporated with lactic acid bacteria

This work aimed to develop an orange juice powder by spray drying with lactic acid bacteria (Lactobacillus plantarum 299v and Pediococcus acidilactici HA‐6111‐2), testing their survival both during drying and storage (room temperature and 4 °C). Initially, the best conditions for spray drying were chosen to allow the best survival of each LAB: (i) inlet air temperature of 120 °C and (ii) 0.5:2 ratio of the orange juice soluble solids and drying agent added (prebiotics: 10 DE maltodextrin or gum Arabic). Survival of LAB was not affected by drying process, and it was higher when cultures were stored at 4 °C. A slightly higher protection was conferred by 10 DE maltodextrin, in the case of L. plantarum and at 4 °C. Pediococcus acidilactici was more resistant during storage at 4 °C, with logarithmic reductions lower than 1 log‐unit. It was demonstrated that it is possible to produce a functional nondairy product, orange juice powder supplemented with prebiotic compounds, containing viable LAB for at least 7 months, when stored at 4 °C.     

Managing the complex data center environment: an Integrated Energy-aware Framework

The problem of Information Technology energy consumption has gained much attention due to the always increasing use of IT both for business and for personal reasons. In particular, data centers are now playing a much more important role in the modern society, where the information is available all the time and everywhere. In this context, the aim of this paper is to study energy efficiency issues within data centers from the Information System perspective. The proposed approach integrates the application and infrastructure capabilities, in which the enactment of adaptation mechanisms is aligned with the business process. Based on both energy and quality dimensions of service-based applications, a model-based approach supports the formulation of new constrained optimization problem that takes into consideration over-constrained solutions where the goal is to obtain the better trade-off between energy and quality requirements. These ideas are combined within a framework where time-based analysis allow the identification of potential system threats and drive the selection of adaptation actions improving overall energy and quality requirements, represented by indicators satisfaction. In addition, the framework includes an evolution mechanism that is able to evaluate past decisions feedback in order to adjust the model according to the current underlying environment. Finally, the benefits of the approach are analyzed in an experimental setting.     

Automatic adjustment of a medical imaging data acquisition system to unknown delays in the input communication channels

In this article, novel FIFO and RAM-based Synchronization Modules to keep synchronism throughout the input channels of a Data Acquisition Electronics (DAE) system are proposed. DAE is a main component of a Medical Imaging System, namely, a Positron Emission Mammography (PEM) system. DAE input data comes from a scanner constituted by an array of scintillating crystals. The scanner captures radiation generated by human cells injected with a radioactive substance and converts it into electrical signals. The corresponding digital information is sent to the DAE. In order to deal with the huge amount of data, flowing at high data rates, point-to-point (p2p) communication channels are used between the scanner and the DAE. Propagation delays associated with the different communication channels may change differently. Additionally, differences among channel delays may exceed one clock period. Keeping synchronism in these circumstances requires more than the classical asynchronous FIFO solution. All these aspects motivate the work proposed in this article. The PEM DAE system is a multi-board, multi-FPGA, multi-clock domain system. Therefore, the DAE architecture follows a Globally Asynchronous, Locally Synchronous (GALS) design style. The novel Synchronization Modules proposed in this article are implemented in the DAE. The effectiveness of these new structures is validated through simulation and laboratorial test. Simulation and test results are presented.