Periplasmic expression of human growth hormone via plasmid vectors containing the {lambda}PL promoter: use of HPLC for product quantification

The influence of different factors acting on Escherichia coliperiplasmic expression of recombinant human growth hormone (hGH)in shake flask cultures has been investigated. Bacterial vectorscontaining the phage     

HDPE/LLDPE reactor blends with bimodal microstructures—Part II: rheological properties

Reactor blends of polyethylene/poly(ethylene-co-1-octene) resins with bimodal molecular weight and bimodal short chain branching distributions were synthesized in a two-step polymerization process. The compositions of these blends range from low molecular weight (LMW) homopolymer to high molecular weight (HMW) copolymer and vice versa HMW homopolymer to LMW copolymer. The shear flow characteristics of these polymers in the typical processing range mostly depend on the molecular weight and MWD of the polymer and are independent of the short chain branch content. From oscillatory shear measurements, it was observed that the viscosity of HMW polymers was reduced with the addition of LMW material. For the polymers produced with this two-step polymerization process, the LMW homopolymer and HMW copolymer blends and HMW homopolymer and LMW copolymer blends were melt miscible, despite the large viscosity differences of the pure components.     

Polymer/layered silicate nanocomposites by combined intercalative polymerization and melt intercalation: a masterbatch process

Poly(ε-caprolactone) (PCL) and poly(vinyl chloride) (PVC) layered silicate nanocomposites were prepared by combination of intercalative polymerization and melt intercalation. In a first step, high clay content PCL nanocomposites were prepared by in situ polymerization of ε-caprolactone intercalated between selected organo-modified silicate layers. The polymerization was catalyzed with dibutyltin dimethoxide in the presence of montmorillonites, the surface of which were previously exchanged with (functionalized) long alkyl chains ammonium cations. Then, these highly filled PCL nanocomposites were added as masterbatches in commercial PCL and PVC by melt blending. The intercalation of PCL chains within the silicate layers by in situ polymerization proved to be very efficient, leading to the formation of intercalated and/or exfoliated structures depending on the organo-clay. These masterbatches were readily dispersed into the molten PCL and PVC matrices yielding intercalated/exfoliated layered silicate nanocomposites which could not be obtained by melt blending the matrix directly with the same organo-modified clays. The formation of nanocomposites was assessed both by X-ray diffraction and transmission electronic microscopy. Interestingly, this so-called ‘masterbatch’ two-step process allowed for preparing PCL nanocomposites even with non-modified natural clay, i.e. sodium montmorillonite, which showed a material stiffness much higher than the corresponding microcomposites recovered by direct melt intercalation. The thermal stability of PCL nanocomposites as a function of clay content was investigated by thermogravimetry (TGA).     

Identification and Cloning of a Pheromone-Binding Protein from the Oriental Beetle, Exomala orientalis

We have identified and cloned a pheromone-binding protein (EoriPBP) from the Japanese and American populations of the Oriental beetle, Exomala orientalis (Coleoptera: Scarabaeidae). The protein showed more than 90% amino acid identity to the previously identified pheromone-binding proteins from Popillia japonica (PjapPBP) and Anomala osakana (AosaPBP), as well as to one of the odorant-binding proteins from Phyllopertha diversa (PdivOBP1). EoriPBP has 116 amino acids, with a calculated molecular mass of 12,981 Da, pI of 4.3, and six highly conserved cysteine residues. 5-RACE amplifications led to the characterization of a signal peptide with 19 amino acids. The signal peptide showed high amino acid identity to the signal peptide for AosaPBP. Comparison of the amino acid sequences of the PBPs involved in the detection of similar ligands, i.e., monounsaturated lactones and ketone, suggests that the most variable residues among the PBPs from E. orientalis, P. japonica, and A. osakana are probably the most discriminating residues. As with the pheromone-binding protein from Bombyx mori, the residues at positions 61, 64, 71, and 82 in EoriPBP, PajpPBP, and AosaPBP, which are either valine, leucine, isoleucine, or methionine, are likely to be specificity determinants.     

Electrically conductive,melt-processed polyaniline/EVA blends

Mechanical blends of ethylene–vinyl acetate copolymer and polyaniline doped with dodecyl benzene sulfonic acid (PAni–DBSA) were prepared in a two-roll mill at 50°C and in a Haake internal mixer at 150°C. The effects of the blend composition and processing conditions on the electrical conductivity and mechanical properties were investigated. These blends exhibited high levels of electrical conductivity at a small amount of PAni complex. Blends prepared in a two-roll mill displayed conductivity values as high as 1 S/cm and a higher protonation degree than the pure PAni–DBSA, as indicated by X-ray photoelectron spectroscopy. Two different insulator–conductor transition points were observed in these blends. The mechanical performance decreased as the amount of PAni–DBSA increased, indicating blend incompatibility and a plasticizing effect of the DBSA. The morphology of the blends were studied by scanning electron microscopy. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 114–123, 2001     

Low temperature thermal degradation of cellulosic insulating paper in air and transformer oil

The thermal degradation of cellulose in the form of Kraft insulating paper has been studied in air for up to 140 h and in transformer oil for up to 3500 h in the temperature range 60–120 °C using measurements of the degree of polymerization (DP) and (in oil) analysis of furanic degradation products. Degradation was faster in air than in oil. The DP decreased from the original value of 1.2 × 10³ to a limiting value in the range of 300–900 depending on temperature and degradation conditions. The variation of the DP with degradation time was consistent with two mechanisms, one in which the first‐order rate constant decreased exponentially with time, and another in which only a limited number of chain bonds were scissionable. The degradation rate was first order in scissionable bonds. The major furanic degradation products were 2‐furaldehyde, 5‐hydroxymethyl‐2‐furaldehyde and furfuryl alcohol. Their concentrations continually increased over the timescale of the experiments. © 2001 Society of Chemical Industry     

Strategy for a Scale‐up Correlation in a Dissolved Air Flotation Chamber

Beginning with a laboratory‐scale physical model, a scale‐up correlation for a pilot unit project was determined based on the analysis of dynamic similarity correlations involving the predominant phenomena of a dissolved air flotation (DAF) chamber. The implantation costs of pilot units require special strategies due to the lack of correlations of this type, as novel flotation methods have been considered strictly from an economic standpoint. With the aid of computational fluid dynamics and videos of microbubble and floc flow, inertia and gravity were identified as the predominant phenomena in a DAF chamber. The strategy described herein is simple and reduces the likelihood of future risks in scale‐up investments.     

Synthesis,Chiral Separation,Absolute Configuration Assignment,and Biological Activity of Enantiomers of Retro‐1 as Potent Inhibitors of Shiga Toxin

The Shiga toxin (Stx) family is composed of related protein toxins produced by the bacteria Shigella dysenteriae and certain pathogenic strains of E. coli. No effective therapies for Stx intoxication have been developed yet. However, inhibitors that act on the intracellular trafficking of these toxins may provide new options for the development of therapeutic strategies. This study reports the synthesis, chromatographic separation, and pharmacological evaluation of the two enantiomers of Retro‐1, a compound active against Stx and other such protein toxins. Retro‐1 works by inhibiting retrograde transport of these toxins inside cells. In vitro experiments proved that the configuration of the stereocenter at position 5 is not crucial for the activity of this compound. X‐ray diffraction data revealed (S)‐Retro‐1 to be slightly more active than (R)‐Retro‐1.     

Organo-zincate molten salts as immobilising agents for organometallic catalysis

The combination of 1-n-butyl-3-methylimidazolium chloride with ZnCl₂ affords ionic mixtures with different melting point temperatures depending on the zinc molar fraction. RuCl₂(PPh₃)₃ immobilised in the low melting mixture (60°C) promotes the 1-hexene hydrogenation (turnover frequencies up to 44 min^–1) and the recovered solid catalyst phase can be reused several times.     

The cationic polymerization of α-methylstyrene in liquid sulfur dioxide initiated by the HI/I2 system

The polymerization of α-methylstyrene (αMeSty) initiated by HI/I₂ or HI in the presence of liquid sulfur dioxide has been investigated. The number-average molecular weight increased with the monomer concentration for reactions initiated by the HI/I₂ system. I₂ also participates in the initiation process, increasing the number-average polymer chain at higher monomer concentration. HI alone is also able to initiate the polymerization of αMeSty in the presence of SO₂. With this initiator, transfer reaction can be minimized in systems containing low amount of SO₂. Received: 19 December 1996/Revised: 27 January 1997/Accepted 29 January 1997