Resonance and nonresonant laser ionization of sputtered uranium atoms from thin films and single microparticles: evaluation of a combined system for particle trace analysis

The resonance and nonresonant laser ionization of uranium atoms sputtered from thin metal films and individual micrometer-size uranium oxide particles, respectively, was studied to evaluate a new setup for the analysis of actinide-containing micrometer-size particles. Experiments using nonresonant (193-nm) ionization of atoms and molecules sputtered from micrometer-size uranium oxide particles have shown that the uranium detection efficiencies for sputtered neutral atoms are approximately 2 orders of magnitude higher than for secondary ions. In uranium particles of 0.5-microm diameter, 6 x 10(6) atoms of 235U were easily detected and the isotopic ratio of 235U/238U = 0.0048 +/- 4.6% is in excellent agreement with the certified value. The use of two-color, two-step resonance ionization of the sputtered neutral uranium atoms from thin films was investigated. Several excitation schemes were tested, and a significant population of several low-lying metastable states after ion sputtering was observed. Autoionizing states for double-resonant ionization were determined, and the high selectivity of ionization schemes involving these autoionizing states was illustrated by comparing the flight-time distributions of different sputtered species obtained both by resonance and nonresonant multiphoton (355-nm) laser postionization. Ideally, the options for resonance as well as nonresonant ionization would be combined in a single setup, to obtain a large gain in sensitivity and selectivity. Thus, information about the main components as well as specific isotopic information of a trace element could be obtained from the same single particle.     

High Sensitivity,Wearable, Piezoresistive Pressure Sensors Based on Irregular Microhump Structures and Its Applications in Body Motion Sensing

A pressure sensor based on irregular microhump patterns has been proposed and developed. The devices show high sensitivity and broad operating pressure regime while comparing with regular micropattern devices. Finite element analysis (FEA) is utilized to confirm the sensing mechanism and predict the performance of the pressure sensor based on the microhump structures. Silicon carbide sandpaper is employed as the mold to develop polydimethylsiloxane (PDMS) microhump patterns with various sizes. The active layer of the piezoresistive pressure sensor is developed by spin coating PEDOT:PSS on top of the patterned PDMS. The devices show an averaged sensitivity as high as 851 kPa^?1, broad operating pressure range (20 kPa), low operating power (100 nW), and fast response speed (6.7 kHz). Owing to their flexible properties, the devices are applied to human body motion sensing and radial artery pulse. These flexible high sensitivity devices show great potential in the next generation of smart sensors for robotics, real‐time health monitoring, and biomedical applications.     

An effective hybrid approach to remote-sensing image classification

This article presents a hybrid fuzzy classifier for effective land-use/land-cover (LULC) mapping. It discusses a Bayesian method of incorporating spatial contextual information into the fuzzy noise classifier (FNC). The FNC was chosen as it detects noise using spectral information more efficiently than its fuzzy counterparts. The spatial information at the level of the second-order pixel neighbourhood was modelled using Markov random fields (MRFs). Spatial contextual information was added to the MRF using different adaptive interaction functions. These help to avoid over-smoothing at the class boundaries. The hybrid classifier was applied to advanced wide-field sensor (AWiFS) and linear imaging self-scanning sensor-III (LISS-III) images from a rural area in India. Validation was done with a LISS-IV image from the same area. The highest increase in accuracy among the adaptive functions was 4.1% and 2.1% for AWiFS and LISS-III images, respectively. The paper concludes that incorporation of spatial contextual information into the fuzzy noise classifier helps in achieving a more realistic and accurate classification of satellite images.     

ZF从设计概念到系列产品的系统供应者

ZF集团在传动系统、转向器和底盘技术方面处于独特的地位，根据这方面特点，我们把各个子公司，组成一个完整的系统，本文将介绍ZF帕骚（Passau）在非公路传动系统和轴系方面处于领先地位的情况。     

Preface

User Modeling and User-Adapted Interaction -     

Development of a multifunctional coating system for laser-induced material transport

The aim of our research is to develop a novel surface coating for the use in laser microdissection and laser pressure catapulting (LMPC). LMPC is a contact- and contamination-free technique to separate histologic material and living cells for further proteomic and genomic analysis. Several physico-chemical functions must be included within the optimum coating system designed for this purpose, like optical absorption at the laser wavelength, combined with optical transparency in the visible region, a control of the laser ablation process, mechanical stability and biocompability for the adhesion of the histologic material.To achieve the optimum system the combination of several layers is required. The optical absorbance to capture the radiation energy from a frequency-tripled Nd:YAG laser (λ = 355 nm) is reached by a thin layer of zinc oxide (ZnO), deposited by hollow cathode gas flow sputtering. The laser ablation process is controlled by a polyelectrolyte multilayer, consisting of poly(diallyldimethylammonium chloride) (PDADMAC) and poly(sodium 4-styrenesulfonate) (PSS). The evaporation of chemisorbed water from the film is used to promote the catapulting process. For the mechanically stable, laser-dissectible layer organic coatings, like photoresists or lacquers, are suitable. Silica-containing polyacrylate nanocomposites were employed for this purpose.The investigation of the coating system included LMPC experiments with varying compositions of the layer system. The best results were obtained using a system consisting of ZnO, a polyelectrolyte multilayer deposited from 0.1 M Na₂SO₄ containing polymer solutions, and a 1.5-μm thick layer of the polyacrylate nanocomposite.To check the quality of the developed system, experiments with the commonly used poly(ethylene naphthalate) (PEN) foil were performed simultaneously. In addition to the determination of the parameters required for LMPC, quantitative real-time Polymerase Chain Reaction (rt-PCR) of the dissected material verified the benefit of the new system.     

Bestimmung niedermolekular gebundener Purin- und Pyrimidinbasen in Lebensmitteln nach gelchromatographischer Isolierung und hydrolytischem Druckaufschlu?

Zusammenfassung Die gelchromatographisch abgetrennten und isolierten niedermolekularen Purin- und Pyrimidinverbindungen wurden nach hydrolytischem Druckaufschluß an einem Kationenaustauscher als freie Basen bestimmt. Diese Daten werden auch im Verhältnis zu den Gesamtgehalten der Basen des Substrates mitgeteilt. Es zeigte sich, daß bei unbehandelten Proben der Anteil der niedermolekular gebundenen Basen 5–15% (je nach Base und Lebensmittel) der jeweiligen Gesamtbasenmenge beträgt. Bei frischen, nicht erhitzten Lebensmittelproben findet ein schneller Abbau von Adeninnucleotiden zu Inosinnucleotiden und zu Hypoxanthin statt, so daß nur geringe Adeningehalte aus niedermolekularen Verbindungen angetroffen werden. Bei erhitzten Lebensmitteln ist der Anteil niedermolekular gebundener Purin- und Pyrimidinbasen durch Teilhydrolyse von Nucleinsüren höher. Er beträgt dann 30–50% (je nach Base und Lebensmittel) der jeweiligen Gesamtbasenmenge.

---

Determination of purine and pyrimidine bases, bound in compounds of low-molecular weight after isolation by gelpermeation-chromatography and hydrolytic digestion under pressure

Summary Compounds with purine and pyrimidine bases of low-molecular weight were separated and isolated by gelpermeation-chromatography. After acid hydrolysis of nucleotides to free bases in a pressure digestion vessel the bases were separated on cation exchange resins. The data obtained are also reported in relation to the total base content of the substrate. It could be demonstrated that in untreated samples the portion of combined bases of low-molecular weight results in 5 to 15% of the corresponding total base content, depending on base and kind of food. In fresh unheated food samples adenine nucleotides are con verted rapidly to inosine nucleotides and hypoxanthine; therefore only a small share of adenine is found from compounds of low-molecular weight. In heated food the portion of combined low-molecular weight purine and pyrimidine bases proves to be much higher, due to partial hydrolysis of nucleic acids. It amounts to 30 to 50% of the total base content, depending on base and kind of food.

     

The effect of plate thickness on the generation of thermal stress and strain in quenched steels of high hardenability

A visco-elastic-plastic mathematical model that also incorporates transformation plasticity has been used to determine the thermal stress and strain generation in quenched plates of various thicknesses. An increase in plate thickness produced an increase in the maximum amount of absolute strain introduced during the quench. This was associated with an increase in the residual strain at the end of a water quench, but the residual strain was reduced in the case of an oil quench. Former results were in agreement with the experimental data obtained from 20 and 40 mm thick specimens. In contrast, the level of residual absolute stress at specific points in water quenched plates fell as the thickness increased, mainly on account of the amount of stress-relaxation in the later stages of the cooling process, as the temperature in the interior of the thicker sections fell to ambient. This effect did not agree well with the experimental results and casts some doubt on the viscous flow data used at longer times and lower temperatures. The agreement between calculation and experiment was much better in the case of the oil quenched material.