Enhancement of Flexural Design of Horizontally Curved Prestressed Bridges

In this paper, flexural behavior of horizontally curved prestressed (posttensioned) box bridges is studied by using three-dimensional and refined finite-element modeling and analysis. Bridge length, section geometry, and material properties are the same in all the models, while angle of curvature varies from 0 to 90°. The results of analysis show that in curved bridges, stress distribution is significantly different in comparison to straight bridges. Also, the level of stresses at some locations of section width is considerably high. It is proposed to vary the distribution of the prestressing tendons across section width in order to optimize the bridge capacity. Results show that by proper redistribution of prestressing in section width, significant reduction in resultant stress is possible.     

Watermarked 3-D Mesh Quality Assessment

This paper addresses the problem of assessing distortions produced by watermarking 3D meshes. In particular, a new methodology for subjective evaluation of the quality of 3D objects is proposed and implemented. Two objective metrics derived from measures of surface roughness are then proposed and their efficiency to predict the perceptual impact of 3D watermarking is assessed and compared with the state of the art. Results obtained show good correlations between the proposed objective metrics and subjective assessments by human observers     

Dependence on the motif YIPP for the physical association of Jak2 kinase with the intracellular carboxyl tail of the angiotensin II AT1 receptor

Angiotensin II is the effector molecule of the renin-angiotensin system. Virtually all of its biochemical actions are mediated through a single class of cell-surface receptors called AT1. These receptors contain the structural features of the seven-transmembrane, G-protein-coupled receptor superfamily. Angiotensin II, acting through the AT1 receptor, also stimulates the Jak/STAT pathway by inducing ligand-dependent Jak2 tyrosine phosphorylation and activation. Here, we show that a glutathione S-transferase fusion protein containing the carboxyl-terminal 54 amino acids of the rat AT1A receptor physically binds to Jak2 in an angiotensin II-dependent manner. Deletional analysis, using both in vitro protocols and cell transfection analysis, showed that this association is dependent on the AT1A receptor motif YIPP (amino acids 319-322). The wild-type AT1A receptor can induce Jak2 tyrosine phosphorylation. In contrast, an AT1A receptor lacking the YIPP motif is unable to induce ligand-dependent phosphorylation of Jak2. Competition experiments with synthetic peptides suggest that each of the YIPP amino acids, including tyrosine 319, is important in Jak2 binding to the AT1A receptor. The binding of the AT1A receptor to the intracellular tyrosine kinase Jak2 supports the concept that the seven-transmembrane superfamily of receptors can physically associate with enzymatically active intracellular proteins, creating a signaling complex mechanistically similar to that observed with growth factor and cytokine receptors.     

An automated coding and classification system with supporting database for effective design of manufacturing systems

The philosophy of group technology (GT) is an important concept in the design of flexible manufacturing systems and manufacturing cells. Group technology is a manufacturing philosophy that identifies similar parts and groups them into families. Beside assigning unique codes to these parts, group technology developers intend to take advantage of part similarities during design and manufacturing processes. GT is not the answer to all manufacturing problems, but it is a good management technique with which to standardize efforts and eliminate duplication. Group technology classifies parts by assigning them to different families based on their similarities in: (1) design attributes (physical shape and size), and/or (2) manufacturing attributes (processing sequence). The manufacturing industry today is process focused; departments and sub units are no longer independent but are interdependent. If the product development process is to be optimized, engineering and manufacturing cannot remain independent any more: they must be coordinated. Each sub-system is a critical component within an integrated manufacturing framework. The coding and classification system is the basis of CAPP and the functioning and reliability of CAPP depends on the robustness of the coding system. The proposed coding system is considered superior to the previously proposed coding systems, in that it has the capability to migrate into multiple manufacturing environments. This article presents the design of a coding and classification system and the supporting database for manufacturing processes based on both design and manufacturing attributes of parts. An interface with the spreadsheet will calculate the machine operation costs for various processes. This menu-driven interactive package is implemented using dBASE-IV. Part Family formation is achieved using a KAMCELL package developed in TURBO Pascal.     

Influence of joint detail on the flexural/torsional interaction of thin-walled structures

For a structure formed from two thin-walled open members connected at 90°, torsion applied to one member can result in torsion as well as flexure in the second member, with the magnitude and direction of this torsion as well as flexure in the second member being determined by the type of joint used. Conventional structural analysis would normally assume the presence of only flexure in the second member. The results from a finite element study of structures formed from thin-walled channel sections connected by box, mitre and stiffened mitre joints is presented and an explanation for the behaviour of the different joint types is given. It is shown that for the box joint the warping deformation of the loaded member is the dominant factor in determining the magnitude and direction of the twisting of the second member, whilst this is determined for the stiffened mitre joint primarily by the St Venant rotation deformation of the loaded member. For the unstiffened joint it is shown that the warping and St Venant rotation deformation effects tend to cancel each other out.     

Impulse breakdown voltages of triggered multistage vacuum gap

Several sealed-off triggered vacuum gaps are connected in series to improve hold-off voltage. The characteristics of impulse breakdown voltage of these series-connected gaps are investigated experimentally. The sum hold-off voltage of series-connected gaps decreases to a unit hold-off voltage when the maximum value of voltage division ratio across the gaps increases to unity. Self-breakdown probability of the series-connected gaps is always higher than that of a single gap under the same conditions. Hence, stage efficiency of the multistage gap decreases with increasing number of stages. Its value is 90 percent with 2-stage gap and 75 percent with 5-stage gap, respectively, under the same voltage division ratio and the same gap length (2.0 mm) in each stage. Triggered breakdown voltage of 2- or 3- stage gap is several hundred volts when all gaps are triggered simultaneously at the peak of the main impulse wave and a working voltage range is nearly 100 percent in this case. The working voltage range decreases with number of stages. Its value is 45 percent with 3-stage gap and 15 percent with 5-stage gap, respectively, when one triggered gap is fired for switching.