Bacteria foraging optimization in antenna engineering: An application to array fault finding

Finding fault elements in linear antenna arrays using bacteria foraging optimization (BFO) is presented. One of the better options of array diagnosis is to perform it by measuring the radiated field, because in this case, removal of the array from its working site is not required and thereby not interrupting its normal operation. This task of fault finding from far‐field data is designed as an optimization problem where the difference between the far‐field power pattern obtained for a given configuration of failed element(s) and the measured one is minimized w. r. t. the excitations of the array elements. This set of excitations on comparison with the excitations of the original array gives the idea of the fault position and their type, such as either complete fault or partial fault. BFO being relatively new to microwave community when compared with other soft‐computing techniques, its performance was observed w. r. t. time of computation and convergence of the iterative process. Possibility of finding the faults from random sample points and use of minimum number of sample points for array fault finding are the novelties of the present work. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2013.     

Evaluation of AMSR-E soil moisture results using the in-situ data over the Little River Experimental Watershed, Georgia

An operational global soil moisture data product is currently generated from the observations of the Advanced Microwave Scanning Radiometer (AMSR-E) aboard NASA's Aqua satellite using the retrieval procedure described in Njoku and Chan [Njoku, E.G. and Chan, S.K., 2006. Vegetation and surface roughness effects on AMSR-E land observations, remote sensing environment, 100(2), 190-199]. We have generated another soil moisture dataset from the same AMSR-E observed brightness temperature data using the Land Surface Microwave Emission Model (LSMEM) adopting a different estimation method. This paper focuses on a comparison study of soil moisture estimates from the above two methods. The soil moisture data from current AMSR-E product and LSMEM are compared with the in-situ measured soil moisture datasets over the Little River Experimental Watershed (LREW), Georgia, USA for the year 2003. The comparison study was carried out separately for the AMSR-E daytime and night time overpasses. The LSMEM method performed better than the current operational AMSR-E retrieval algorithm in this study. The differences between the AMSR-E and LSMEM results are mostly due to differences in various simplifications and assumptions made for variables in the radiative transfer equations and the soil and vegetation based physical models and the accuracy of the input surface temperature datasets for the LSMEM forward model approach. This study confirms that remote sensing data have the potential to provide useful hydrologic information, but the accuracy of the geophysical parameters could vary depending on the estimation methods. It cannot be concluded from this study whether the soil moisture estimation by the LSMEM approach will perform better in other geographic, climatic or topographic conditions. Nevertheless, this study sheds light on the effects of different approaches for the estimation of geophysical parameters, which may be useful for current and future satellite missions.     

Stiction – definition, modelling, detection and quantification

Stiction or high static friction is a common problem in spring-diaphragm type control valves, which are widely used in the process industry. Recently, there have been many attempts to understand, define, model and detect stiction in control valves. There are several methods for detecting stiction, but quantification of the actual amount of stiction still remains a challenge. This paper discusses briefly the definition and modelling of stiction. Then it demonstrates a new method to detect and quantify the actual amount of valve stiction using routine operating data. The proposed method is completely data-driven. No additional excitation or experimentation of the plant is required.     

Outage Performance of Uplink (UL) NOMA Network

Wireless Personal Communications - This paper proposes and analyses the power allocation coefficient normalization for successive interference cancellation in power-domain non-orthogonal multiple...     

Multilevel segmentation of Hippocampus images using global steered quantum inspired firefly algorithm

Applied Intelligence - Microscopic Image segmentation has a crucial role in detecting and diagnosing numerous critical diseases like Alzheimer’s disease, Kidney disease, Cancer, many...     

Effect of the polyelectrolyte coating on the photothermal efficiency of gold nanorods and the photothermal induced cancer cell damage

Coating gold nanorods (GNRs) with polyelectrolytes is an effective approach to make them biocompatible for potential use in photothermal treatment (PTT) of cancer. The authors report the effect of coating of the GNRs with polystyrene sulphonate (PSS‐GNRs) and PSS plus poly di‐allyl di‐methyl ammonium chloride (PDDAC‐GNRs) on its photothermal conversion efficiency (PTE), cellular uptake and subsequently the photothermal induced cytotoxicity in human oral cancer cells (NT8e). Coating of GNRs with PSS led to decrease in PTE by ∼30% and further coating it with PDDAC led to its increase to similar level, with respect to as‐ prepared GNRs. The cellular uptake of PDDAC‐GNRs in cancer cells was double than that for PSS‐GNRs. PTT of cancer cells after treatment with 60 pM of either PDDAC‐GNRs or PSS‐GNRs resulted in cytotoxicty of ∼90%. At higher concentration of 120 pM, while PSS‐GNRs showed no further change, for PDDAC‐GNR the photothermal induced cytotoxicity decreased to ∼50%. The broadening of longitudinal surface plasmon peak of PDDAC‐GNRs and appearance of dark clusters in cells under bright‐field microscope suggested intracellular clustering of PDDAC‐GNRs. In conclusion, despite high PTE and cellular uptake of PDDAC‐GNRs, its intracellular clustering (due to acidic pH) adversely affect the PTT of cancer cells.Inspec keywords: polymer electrolytes, gold, nanorods, cancer, nanomedicine, cellular biophysics, toxicology, radiation therapy, polymer filmsOther keywords: polyelectrolyte coating, photothermal efficiency, gold nanorods, photothermal induced cancer cell damage, cancer photothermal treatment, polystyrene sulphonate, poly di‐allyl di‐methyl ammonium chloride, photothermal conversion efficiency, cellular uptake, photothermal‐induced cytotoxicity, human oral cancer cells, dark clusters, bright‐field microscope, PDDAC‐GNR intracellular clustering, acidic pH, intracellular compartment, Au     

Algorithms for generating multi-stage molding plans for articulated assemblies

Multi-stage molding is capable of producing better-quality articulated products at a lower cost. During the multi-stage molding process, assembly operations are performed along with the molding operations. Hence, it gives rise to a new type of planning problem. It is difficult to perform the planning manually because it involves evaluating large number of combinations and solving complex geometric reasoning problems. This paper investigates the problem of generating multi-stage molding plans for articulated assemblies. We present a planning framework that allows us to utilize constraints from experimentally proven molding plans. As a part of the planning problem, we determine the molding sequence and intermediate assembly configurations. We present algorithms for all the steps in the planning problem and characterize their computational complexities. Finally, we illustrate our approach with representative examples.     

Reconstruction Based Recognition of Scenes with Multiple Repeated Components

This paper proposes an invariance based recognition scheme for scenes with multiple repeated components. The scheme considers three component subsets which characterize the scene completely. Each such three component subset is reconstructed using single image based information. We have developed a mathematical framework for the projective reconstruction based on relative affine structure of each such three component building block. This is extended to the case when each of the components is a quadric. A set of projective invariants of three quadrics has also been obtained by us. Although the reconstruction scheme is general and applicable to all multiple repeated components, it requires the computation of infinite homography. The infinite homography and hence the reconstruction scheme are only image computable with the given information in the case of translational repetition. We therefore develop a recognition strategy for the specific case of translationally repeated quadrics. As a recognition strategy for scenes with multiple translationally repeated quadric components, we propose to compute and store invariant values for each such three component subsets. Experiments on real data have shown the applicability of this approach for recognition of aerial images of power plants. The discriminatory power of the invariants and the stability of the recognition results have also been experimentally demonstrated.     

33.7 MHz heavy-ion radio frequency quadrupole linac at VECC Kolkata

A 33.7 MHz heavy-ion radio frequency quadrupole (RFQ) linear accelerator has been designed, built, and tested. It is a four-rod-type RFQ designed for acceleration of 1.38 keVu, qA> or =116 ions to about 29 keVu. Transmission efficiencies of about 85% and 80% have been measured for the unanalyzed and analyzed beams, respectively, of oxygen ((16)O(2+), (16)O(3+), (16)O(4+)), nitrogen ((14)N(3+), (14)N(4+)), and argon ((40)Ar(4+)). The system design and measurements along with results of beam acceleration test will be presented.