Plasmonic propagations distances for interferometric surface plasmon resonance biosensing

A surface plasmon resonance (SPR) scheme is proposed in which the local phase modulations of the coupled plasmons can interfere and yield phase-sensitive intensity modulations in the measured signal. The result is an increased traceability of the SPR shifts for biosensing applications. The main system limitation is the propagation distance of the coupled plasmon modes. This aspect is therefore studied for thin film microstructures operating in the visible and near-infrared spectral regions. The surface roughness of the substrate layer is examined for different dielectrics and deposition methods. The Au layer, on which the plasmonic modes are propagating and the biosensing occurs, is also examined. The surface roughness and dielectric values for various deposition rates of very thin Au films are measured. We also investigate an interferometric SPR setup where, due to the power flux transfer between plasmon modes, the specific choice of grating coupler can either decrease or increase the plasmon propagation length.     

Synthesis of UHMW-PE by a Highly Active Homogeneous System: η5-(C5H5)2Ti(η1-OC(O)C6H5)2/MAO

Summary The complex ⁵-(C₅H₅)₂Ti (¹-OC(O)C₆H₅)₂ was synthesized and activated with MA0 for ethylene polymerization. The resultant polymer is UHMW-PE with a viscosimetric molecular weight of Mv = 6.8 x 10⁶ to 0.7 x 10⁶ g/mol dependent on the temperature of the reaction. The effects of the Al/Ti molar ratio and temperature of the reaction on the catalytic activity and polymer properties were studied.     

Olive oil consumption and reduced incidence of hypertension: The SUN study

Olive oil, a major component of the Mediterranean diet, has been associated in some small clinical trials and cross-sectional studies with a reduction in blood pressure. The objective of this study was to assess the association of olive oil consumption with the incidence of hypertension in an epidemiologic cohort, the Seguimiento Universidad de Navarra (SUN) study. The SUN Project is a prospective cohort study whose members are all university graduates. The recruitment and follow-up of participants is made using mailed questionnaires. Diet was assessed using a semiquantitative food frequency questionnaire previously validated in Spain, with 136 items. Outcomes of interest were newly diagnosed cases of hypertension, as reported by participants in the follow-up questionnaires. Logistic regression models were fit to assess the risk of hypertension associated with olive oil consumption. For the present analysis, we have taken in consideration the first 6,863 participants, with at least 2 yr of follow-up. After a median follow-up time of 28.5 mon, the cumulative incidence of hypereension was 4.7% in men and 1.7% in women. A lower risk of hypertension was observed among participants with a higher olive oil consumption at baseline, but the results were not statistically significant (P=0.13 for the linear trend test in the multivariate model). However, among men, the adjusted odds ratios (OR) (95% confidence intervals) of hypertension for the second to fifth quintiles of olive oil consumption, compared with the first quintile, were 0.55 (0.28–1.10), 0.75 (0.39–1.43), 0.32 (0.15–0.70), and 0.46 (0.23–0.94), respectively (P=0.02 for linear trend). No association was found between olive oil consumption and the risk of hypertension among women. In conclusion, in a Mediterranean population, we found olive oil consumption to be associated with a reduced risk of hypertension only among men. The lack of association observed among women might be attributed to the overall lower incidence of hypertension found among females and the resulting lower statistical power.     

Catalytic Reduction of 4-Nitrobenzoic Acid by cis-[Rh(CO)2(Amine)2](PF6) Complexes Under Water–Gas Shift Reaction Conditions: Kinetics Study

Rhodium(I) complexes of the type, cis-[Rh(CO)₂(amine)₂](PF₆) where (amine = 3-picoline, 2-picoline, pyridine, 2,6-lutidina or 3,5-lutidine) dissolved in 80% aqueous amine solutions catalyzed the selective reduction of 4-nitrobenzoic acid to 4-aminobenzoic acid under CO atmosphere. The importance of these catalytic systems is their high chemo selectivity for the aromatic nitro group of the 4-nitrobenzoic acid with respect to the carboxylic group, allowing the production of the desired aromatic amine in high yields. The 4-aminobenzoic acid production depends on the nature of the coordinated amine. The Rh/3,5-lutidine system, the most active catalyst among tested, displays turnover frequencies for 4-aminobenzoic acid production of about 173 moles per mole Rh per day for [Rh] = 1 × 10^?4 mol, [4-nitrobenzoic acid] = 3.82 × 10^?3mol, 10 mL of 80% aqueous 3,5-lutidine, P(CO) = 0.9 atm at 100 °C. Analyses of kinetic results for the Rh/3,5-lutidine system show a first order dependence on 4-nitrobenzoic acid concentration, a non-linear dependence on CO pressure, a segmented Arrhenius plot and dependence on the nature of the reducing gas agent. These data are discussed in terms of a possible mechanism.     

A urine patch framework to simulate nitrogen leaching on New Zealand dairy farms

On New Zealand dairy farms, it is the nitrogen excreted directly onto pasture, particularly urine, that drives nitrogen (N) leaching from the farm. A new framework (UPF: Urine Patch Framework) is presented that post-processes the results of a whole farm model and runs a mechanistic soil model to simulate the urine patches. Two alternative methods to simulate the spatial distribution of urine patches were implemented and compared (Grid: spatially explicit, and Probabilistic: based on the probability of different temporal urination patterns). This paper describes the implementation of these two methods in connection with a Whole Farm Model; and compares the N leaching predictions with observed data. Two examples are provided, one analyzing the impact of urine patch overlap and another, the relative risk of N leaching at different times of urinary N deposition. The model showed good correlation and predictive ability between simulated annual N leaching results and observed data [R² = 94 %, mean relative prediction error (MRPE) = 10 % for Grid and R² = 72 %, MRPE = 20 % for Probabilistic]. The two methods produced similar results across an 8-year period for monthly and annual N leaching (R² = 96 %, MRPE = 10 % and R² = 86 %, MRPE = 8 %; respectively). Only 8 % of the paddock area was covered with multiple urinations during 1 year, but as much as 39 % of the total urine volume was deposited on overlapped patches. Systematically removing all urinary N for 1 month in either May or June reduced N leaching by approximately 20 %. Avoiding urinary N deposition during autumn or early winter could be highly effective in mitigating N leached during the following winter.     

Impact of N on the atomic-scale Sb distribution in quaternary GaAsSbN-capped InAs quantum dots

The use of GaAsSbN capping layers on InAs/GaAs quantum dots (QDs) has recently been proposed for micro- and optoelectronic applications for their ability to independently tailor electron and hole confinement potentials. However, there is a lack of knowledge about the structural and compositional changes associated with the process of simultaneous Sb and N incorporation. In the present work, we have characterized using transmission electron microscopy techniques the effects of adding N in the GaAsSb/InAs/GaAs QD system. Firstly, strain maps of the regions away from the InAs QDs had revealed a huge reduction of the strain fields with the N incorporation but a higher inhomogeneity, which points to a composition modulation enhancement with the presence of Sb-rich and Sb-poor regions in the range of a few nanometers. On the other hand, the average strain in the QDs and surroundings is also similar in both cases. It could be explained by the accumulation of Sb above the QDs, compensating the tensile strain induced by the N incorporation together with an In-Ga intermixing inhibition. Indeed, compositional maps of column resolution from aberration-corrected Z-contrast images confirmed that the addition of N enhances the preferential deposition of Sb above the InAs QD, giving rise to an undulation of the growth front. As an outcome, the strong redshift in the photoluminescence spectrum of the GaAsSbN sample cannot be attributed only to the N-related reduction of the conduction band offset but also to an enhancement of the effect of Sb on the QD band structure.     

Comparing screening approaches to investigate stability of common items in Rasch equating

This paper used real and simulated data sets to compare three screening approaches often used in state-wide equating programs utilizing the Rasch model: Wright and Stone's t-statistic, robust z-statistic, and displace. Analyses of real data sets supported the superiority of robust z-statistic and displace measure relative to Wright and Stone's t-statistic. The simulation component did not support the contention that indiscriminate use of the +/-0.3 logits criterion inflates rates of Type I error for robust z-statistic and displace measure, although this contention was supported for the Wright and Stone's t-statistic. However, Type II error rates were largest for displace measure, followed by the robust z-statistic, then the t-statistic. The paper discusses the importance of a priori selection of a criterion for screening linking items and its effects on stability and accuracy of Rasch equating constant.     

High reliability outdoor sonar prototype based on efficient signal coding

Many mobile robots and autonomous vehicles designed for outdoor operation have incorporated ultrasonic sensors in their navigation systems, whose function is mainly to avoid possible collisions with very close obstacles. The use of these systems in more precise tasks requires signal encoding and the incorporation of pulse compression techniques that have already been used with success in the design of high-performance indoor sonars. However, the transmission of ultrasonic encoded signals outdoors entails a new challenge because of the effects of atmospheric turbulence. This phenomenon causes random fluctuations in the phase and amplitude of traveling acoustic waves, a fact that can make the encoded signal completely unrecognizable by its matched receiver. Atmospheric turbulence is investigated in this work, with the aim of determining the conditions under which it is possible to assure the reliable outdoor operation of an ultrasonic pulse compression system. As a result of this analysis, a novel sonar prototype based on complementary sequences coding is developed and experimentally tested. This encoding scheme provides the system with very useful additional features, namely, high robustness to noise, multi-mode operation capability (simultaneous emissions with minimum cross talk interference), and the possibility of applying an efficient detection algorithm that notably decreases the hardware resource requirements.     

Morphology and structural properties of pH-responsive amphiphilic peptides

Protein nanomaterials at the peptide level have shown great potential for medical applications. Peptides change their morphological conformation because of changes in self-assembly properties when they are exposed to changes in solvent composition or pH. Two 15-residue peptide sequences, KhK (KKKFLIVIGSIIKKK) and Alternating Kh (KFLKKIVKIGKKSII), were designed for the purpose of determining the role of peptide sequence on solution morphology and conformation. KhK solutions exhibited a random coil to helical transition when solvent conditions were changed from water to a trifluorethanol/water solution at acidic pH. Alternating Kh solutions, however, demonstrated primarily random coil character under similar solvent and pH conditions as determined by circular dichroism spectroscopy and 2D-1H-1H nuclear magnetic resonance spectroscopy. At basic pH, circular dichroism spectroscopy and nuclear magnetic resonance spectroscopy analysis demonstrated that random coil character increased at basic pH for KhK, whereas Alternating Kh exhibited an increase in beta-sheet character. Further analysis by transmission electron microscopy showed marked differences in the peptide solution morphology. Peptide particle aggregation and fiber formation were significantly affected by solvent composition and pH values for both peptide sequences.