Nanoliposomes for encapsulation and delivery of the potential antitumoral methyl 6-methoxy-3-(4-methoxyphenyl)-1H-indole-2-carboxylate

A potential antitumoral fluorescent indole derivative, methyl 6-methoxy-3-(4-methoxyphenyl)-1H-indole-2-carboxylate, was evaluated for the in vitro cell growth inhibition on three human tumor cell lines, MCF-7 (breast adenocarcinoma), A375-C5 (melanoma), and NCI-H460 (non-small cell lung cancer), after a continuous exposure of 48 h, exhibiting very low GI50 values for all the cell lines tested (0.25 to 0.33 μM). This compound was encapsulated in different nanosized liposome formulations, containing egg lecithin (Egg-PC), dipalmitoyl phosphatidylcholine (DPPC), dipalmitoyl phosphatidylglycerol (DPPG), DSPC, cholesterol, dihexadecyl phosphate, and DSPE-PEG. Dynamic light scattering measurements showed that nanoliposomes with the encapsulated compound are generally monodisperse and with hydrodynamic diameters lower than 120 nm, good stability and zeta potential values lower than -18 mV. Dialysis experiments allowed to monitor compound diffusion through the lipid membrane, from DPPC/DPPG donor liposomes to NBD-labelled lipid/DPPC/DPPG acceptor liposomes.     

In vitro release profiles of β-carotene encapsulated in PHBV by means of supercritical carbon dioxide micronization technique

The main objective of this work was to investigate the characteristics of the in vitro release of β-carotene encapsulated in poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) using the solution enhanced dispersion by supercritical fluids (SEDS) technique. The release tests were performed using encapsulated complex with solute loading from 2.24 to 27.5% and encapsulation efficiency from 7.75 to 55.54%. The release profile assays were performed in ethyl acetate, n-hexane and anhydrous ethanol, and monitored by UV-vis spectrophotometer concentration analysis. Results indicated higher initial release rates in ethyl acetate and in n-hexane, with cumulative release percentage varying from 31.50 to 69.58% and from 42.08 to 55.96%, respectively. For anhydrous ethanol the maximum concentration was reached at 180 min, 300 min and 10 days, depending on the initial amount of β-carotene, with cumulative release ranging from 45.27 to 88.22%. In general, the β-carotene release can be controlled by the organic solvent used and by the initial amount of solute encapsulated, aspects that help the selection of the conditions to achieve the desired release profiles for a specific application.     

Effects of diet type and supplementation of glucosamine, chondroitin, and MSM on body composition, functional status, and markers of health in women with knee osteoarthritis initiating a resistance-based exercise and weight loss program

Background

The purpose of this study was to determine whether sedentary obese women with knee OA initiating an exercise and weight loss program may experience more beneficial changes in body composition, functional capacity, and/or markers of health following a higher protein diet compared to a higher carbohydrate diet with or without GCM supplementation.

Methods

Thirty sedentary women (54 ± 9 yrs, 163 ± 6 cm, 88.6 ± 13 kg, 46.1 ± 3% fat, 33.3 ± 5 kg/m²) with clinically diagnosed knee OA participated in a 14-week exercise and weight loss program. Participants followed an isoenergenic low fat higher carbohydrate (HC) or higher protein (HP) diet while participating in a supervised 30-minute circuit resistance-training program three times per week for 14-weeks. In a randomized and double blind manner, participants ingested supplements containing 1,500 mg/d of glucosamine (as d-glucosamine HCL), 1,200 mg/d of chondroitin sulfate (from chondroitin sulfate sodium), and 900 mg/d of methylsulfonylmethane or a placebo. At 0, 10, and 14-weeks, participants completed a battery of assessments. Data were analyzed by MANOVA with repeated measures.

Results

Participants in both groups experienced significant reductions in body mass (-2.4 ± 3%), fat mass (-6.0 ± 6%), and body fat (-3.5 ± 4%) with no significant changes in fat free mass or resting energy expenditure. Perception of knee pain (-49 ± 39%) and knee stiffness (-42 ± 37%) was decreased while maximal strength (12%), muscular endurance (20%), balance indices (7% to 20%), lipid levels (-8% to -12%), homeostasis model assessment for estimating insulin resistance (-17%), leptin (-30%), and measures of physical functioning (59%), vitality (120%), and social function (66%) were improved in both groups with no differences among groups. Functional aerobic capacity was increased to a greater degree for those in the HP and GCM groups while there were some trends suggesting that supplementation affected perceptions of knee pain (p < 0.08).

Conclusions

Circuit style resistance-training and weight loss improved functional capacity in women with knee OA. The type of diet and dietary supplementation of GCM provided marginal additive benefits.

Trial Registration

ClinicalTrials.gov: NCT01271218     

Gelcasting of alumina-chitosan beads

Several papers have reported the advantageous combination of chitosan and ceramic particles for such applications as biomimetic scaffolds, membranes, pollution remediation and gelcasting complex shapes. This work presents a novel gelcasting consolidation mechanism, based on the effects of pH changes on chitosan solubility and zeta potential of alumina particles. Unlike other chitosan-based gelcasting methods, it employs a small content of organic material (lower than 3 wt%) and does not require crosslinking agents (such as glutaraldehyde). With this new method alumina beads with 0.5-1 mm diameter could be produced, whose porosity and specific surface area could be tuned for various applications.     

SEM study of the morphology of asymmetric cellulose acetate membranes produced from recycled agro-industrial residues: sugarcane bagasse and mango seeds

Cellulose, obtained both from sugarcane bagasse and mango seeds, was used for synthesizing cellulose acetate in order to produce asymmetric membranes. These were compared to membranes of commercial cellulose acetate (Rhodia). All produced membranes were asymmetric, characterized by the presence of a dense skin and a porous support. Differences regarding the morphology of the surfaces as well as of the porous support can be noticed. Scanning Electron Microscopy (SEM) showed that the morphology of the superficial layer, responsible for transport, depends on the different lignin content of the starting material and also on the viscosity average molecular weight of the cellulose acetates produced from sugarcane bagasse, mango seed, and Rhodia’s commercial cellulose acetate.     

Formulation and characterization of leather and rubber wastes composites

Residues from footwear roughing and carding operations represent 5–15% (w/w) of the solid wastes generated by shoe‐making companies. These wastes are mainly composed by chromium tanned leather and sole materials, and are mostly land filled. Sometimes leaching tests show these wastes as hazardous due to chromium in the leachate. This work aims at a more sustainable option for these wastes by recycling them in styrene butadiene rubber (SBR) and acrylonitrile butadiene rubber (NBR). Thus, they were charged with: (i) ≤1 mm leather waste fibers in the range of 10–25 parts per hundred parts of rubber (phr); and (ii) leather and soles industrial carding and roughing wastes in the range of 20–100 phr. The leather waste fibers‐rubber composites tear strength is increased till 25 phr and both tension and elongation at break decrease within the acceptable range till 12.5 phr for SBR and 15 phr for NBR. In the case of leather and sole carding and roughing wastes, composites tear strength increases till 100 phr, and tension and elongation decrease within the acceptable range till 20 phr. The composite materials at the end of their life cycle may be considered inert or non‐hazardous wastes. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers     

Analysis of solution polybutadiene polymerizations performed with a neodymium catalyst

This article is regarding the polymerization of 1,3‐butadiene with a neodymium catalyst activated by diisobutylaluminum‐hydride and diethylaluminum chloride (DEAC). The effects of the polymerization conditions (ratio between DEAC and neodymium molar concentrations, polymerization temperature, catalyst concentration, and butadiene concentration) on the polymer yield and molecular weight distribution (MWD) of polybutadiene (PB) samples were evaluated. It is shown that the DEAC/Nd ratio and the polymerization temperature are the reaction variables that influence the MWD and the catalyst performance most significantly. PBs with broad and sometimes bimodal MWD were produced at the analyzed reaction conditions. For this reason, the MWD of the obtained polymer materials was deconvoluted with the help of the Flory most probable distribution, indicating that three or more catalyst sites are required to explain the final MWD of the polymer samples. Finally, it was observed that the analyzed neodymium catalyst is able to produce branched PBs at mild reaction conditions and that the branching frequency depends on the polymerization conditions, which may be useful for development of operation policies at plant site and production of materials with improved performances. POLYM. ENG. SCI., 2011. © 2010 Society of Plastics Engineers     

A planar integrated RCD snubber/voltage clamp

In order to reduce the cost, size, and weight of power electronic systems, it has become necessary to integrate electromagnetic structures, which until now have been constructed with discrete components. This approach not only reduces the component count, but also gives much greater control over parasitic elements. In this article, the authors describe an electromagnetically integrated resistor-capacitor-diode (RCD) snubber/voltage clamp that uses a planar construction technique. The design and construction are described and the performance is verified experimentally. Some advantages of the integrated component over its discrete counterpart are also given     

The combined use of scanning vibrating electrode technique and micro-potentiometry to assess the self-repair processes in defects on “smart” coatings applied to galvanized steel

Model weldable primer coatings for galvanized steel were modified with submicron containers loaded with corrosion inhibitors. This procedure aims at introducing a new functionality in the thin coatings self-repair ability. The assessment of this property demands new protocols and new approaches, combining conventional electrochemical methods with electrochemical and analytical techniques of micrometer spatial resolution. Thus, in this work model defects were created in the coatings by using a focused ion beam (FIB). The coated samples, containing the model defects, were immersed in a NaCl 0.05 M solution and the corrosion inhibition ability was studied using the scanning vibrating electrode technique (SVET) and the scanning ion-selective electrode technique (SIET). SVET–SIET measurements were performed quasi-simultaneously. Qualitative chemical analysis was performed by SEM combined with EDS. Complementary studies were carried out by electrochemical impedance spectroscopy (EIS) to assess the effect of the containers filled with corrosion inhibitors on the barrier properties of the coatings. The electrochemical results highlight the importance of the combined use of integral and localized electrochemical techniques to extract information for a better understanding of the corrosion processes and corresponding repair of active microscopic defects formed on thin coatings containing inhibitor filled containers.     

Comparative study of homogeneous and heterogeneous styrene polymerizations with Ni(acac)2/MAO catalytic system

Styrene polymerization was carried out with Ni(acac)₂/MAO and Ni(acac)₂/SiO₂/MAO. The influence of reaction parameters (Al/Ni mole ratio, catalyst concentration, temperature and time polymerization) on styrene polymerization was evaluated. It was observed that both catalytic systems were affected by reaction parameters and that the heterogeneous catalyst presented higher activity than the homogeneous one. Polystyrenes with different molecular weight, stereoregularity and polydispersity were obtained. These results suggest that different active catalyst species could have been present. In addition, two types of methylaluminoxane (MAO) with different molecular weights were also evaluated as cocatalyst. As a result, the catalyst activity and stereospecificity were strongly affected by the MAO type.