Domestic Water and Sanitation in Cyclones and Floods in Bangladesh and a Proposed Research Agenda

ABSTRACT

Water is one of the top priority item s i relief activities but the appropriateness and effectiveness of this activity may be questioned. Water and sanitation (WS) are inseparable and together they play major roles in the transmission of the pathogen of diarrhoeal disease. Thousands of people die or suffer from WS-related diseases during postdisaster periods. Here we present WS-related experiences gained after Bangladesh's 1991 cyclone and the views of participants in a regional and a national (local) workshop on this matter held in Bangladesh. About 63 per cent of the water purifying tablets (WPTs) distributed after the 1991 cyclone were found to have lost potency Relief personnel lack basic knowledge about WS practices and the management of WS provision. Participants in the two workshops documented serious problems i this field at both regional and national levels. Major issues for research may include: an appropriate environmental preparedness plan; appropriate waste disposal technologies; appropriate water treatment methods; self- help activities during vulnerable periods; and health education related to WS in disaster situations.     

Identification and classification of ERP critical failure factors in Iranian industries

Implementation of Enterprise Resource Planning systems (ERPs) is a complex and costly process, which usually results in serious failures. The majority of previous studies and research projects have been conducted in identifying ERP Critical Success Factors (CSFs) rather than Critical Failure Factors (CFFs). On the other hand, most studies have been devoted to developed countries, while in developing countries, many companies have moved towards using such systems. The majority of IT/IS management standards and guidelines have been developed by technologically-leading countries. But developing countries, which mostly confront with especial challenges, have a different condition from the implicit assumptions of leading countries. Iran is one of these countries that many of its ERP implementation projects led to failure. There is no comprehensive study that identifies ERP CFFs in Iranian industries. The main purpose of this study is to identify such factors and classify them to help other industries, consultants and implementers to prevent failures in the implementation of ERP projects. So, at first, with the semi structured interviews and literature reviews, 47 failure factors were identified. After that a questionnaire developed and sent to ERP project team members in Iranian industries that failed in their ERP projects. Robust Exploratory Factor Analysis (EFA) has been used for data analysis, which finally classified critical failure factors in seven groups named as vendor and consultant, human resources, managerial, project management, processes, organizational and technical. The results of this study have provided a very useful reference for scholars and managers to identify the relevant issues of ERP projects failure in developing countries.     

Heat transfer in a turbulent jet impinging on a moving plate considering high plate-to-jet velocity ratios

In this paper, heat transfer characteristics of a turbulent slot jet impinging orthogonally on an isothermal moving hot plate is studied numerically. The governing equations were discretized using the finite volume method and the υ ² — f turbulence model was employed for turbulence modeling. The effect of the jet Reynolds number and the plate-to-jet velocity ratio (R) on the Nusselt were investigated. Despite of most previous studies, which have been restricted to R≤2, in the present research higher values of R, also were considered (0≤R≤6). Range of studied jet Reynolds number was between 3000 and 60000. The results indicate that at a fixed plate-to-jet velocity ratio increment of the Reynolds number leads to the enhancement of the average Nusselt number. For each Reynolds number, the average Nusselt number reduces with increasing the plate-to-jet velocity ratio until it becomes minimum at R = 1.25. For R>1.25 trend changes so that these parameters increase. In addition, it was found that only for R>2.5 the average Nusselt number is improved due to the plate motion in comparison with the stationary jet. The results are validated against available experimental data, showing good agreement.     

An integrated model for closed-loop supply chain configuration and supplier selection: Multi-objective approach

Reverse logistics consists of all operations related to the reuse of products. External suppliers are one of the important members of reverse logistics and closed loop supply chain (CLSC) networks. However in CLSC network configuration models, suppliers are assessed based on purchasing cost and other factors such as on-time delivery are ignored. In this research, a general closed loop supply chain network is examined that includes manufacturer, disassembly, refurbishing, and disposal sites. Meanwhile, it is managed by the manufacturer. We propose an integrated model which has two phases. In the first phase, a framework for supplier selection criteria in RL is proposed. Besides, a fuzzy method is designed to evaluate suppliers based on qualitative criteria. The output of this stage is the weight of each supplier according to each part. In the second phase, we propose a multi objective mixed-integer linear programming model to determine which suppliers and refurbishing sites should be selected (strategic decisions), and find out the optimal number of parts and products in CLSC network (tactical decisions). The objective functions maximize profit and weights of suppliers, and one of them minimizes defect rates. To our knowledge, this model is the first effort to consider supplier selection, order allocation, and CLSC network configuration, simultaneously. The mathematical programming model is validated through numerical analysis.     

Fault diagnosis and accommodation of nonlinear systems based on multiple-model adaptive unscented Kalman filter and switched MPC and H-infinity loop-shaping controller

In this paper, a new active fault tolerant control (AFTC) methodology is proposed based on a state estimation scheme for fault detection and identification (FDI) to deal with the potential problems due to possible fault scenarios. A bank of adaptive unscented Kalman filters (AUKFs) is used as a core of FDI module. The AUKF approach alleviates the inflexibility of the conventional UKF due to constant covariance set up, leading to probable divergence. A fuzzy-based decision making (FDM) algorithm is introduced to diagnose sensor and/or actuator faults. The proposed FDI approach is utilized to recursively correct the measurement vector and the model used for both state estimation and output prediction in a model predictive control (MPC) formulation. Robustness of the proposed FTC system, H_∞ optimal robust controller and MPC are combined via a fuzzy switch that is used for switching between MPC and robust controller such that FTC system is able to maintain the offset free behavior in the face of abrupt changes in model parameters and unmeasured disturbances. This methodology is applied on benchmark three-tank system; the proposed FTC approach facilitates recovery of the closed loop performance after the faults have been isolated leading to an offset free behavior in the presence of sensor/actuator faults that can be either abrupt or drift change in biases. Analysis of the simulation results reveals that the proposed approach provides an effective method for treating faults (biases/drifts in sensors/actuators, changes in model parameters and unmeasured disturbances) under the unified framework of robust fault tolerant control.     

Metal-electroceramic bonding in PZT through the selective application of laser energy

Ferrite powder has been directly bonded to the surface of poled lead zirconate titanate (PZT-4) using direct laser sintering. The resultant cohesion between the metal and ceramic is extremely good although care must be taken with the processing in order to limit the damage inflicted upon the PZT. Four point bending suggests that the strength of the processed samples has reduced to 60 MPa as compared to 76 MPa for the unprocessed ceramic. Electrical and piezoelectric measurements shows that the laser sintering had caused mechanical damage to a depth of 550 μm and thermal damage (depoling) to a depth of 800 μm.     

Recent developments in catalyst synthesis using DBD plasma for reforming applications

The catalyst has a significant role in gas processing applications such as reforming technologies for H₂ and syngas production. The stable catalyst is requisite for any industrial catalysis application to make it commercially viable. Several methods are employed to synthesize the catalysts. However, there is still a challenge to achieve a controlled morphology and pure catalyst which majorly influences the catalytic activity in reforming applications. The conventional methods are expansive, and the removal of the impurities are major challenges. Nevertheless, it is not straightforward to achieve the desired structure and stability. Therefore, significant interest has been developed on the advanced techniques to take control of the physicochemical properties of the catalyst through non-thermal plasma (NTP) techniques. In this review, the systematic evolution of the catalyst synthesis using NTP technique is elucidated. The emerging DBD plasma to synthesized and effective surface treatment is reviewed. DBD plasma synthesized catalyst performance in reforming application for H₂ and syngas production is summarised. Furthermore, the status of DBD plasma for catalyst synthesis and proposed future avenues to design environmentally suitable and cost-effective synthesis techniques are discussed.     

A non-contact method for part-based process performance monitoring in end milling operations

Surface response to excitation (SuRE) method was originally developed for structural health monitoring (SHM) applications. SuRE was used to evaluate the performance of completed milling operations. The method generates surface waves on the plate and studies the spectrum changes at selected points to detect defects and change of compressive forces. In this study, the length, depth, and width of a slot were changed step by step. The surface of the aluminum plate was excited in the 20–400 kHz range with a piezoelectric element. A laser scanning vibrometer was used to monitor the vibrations at the predetermined grid points after the dimensions of the slot were changed methodically. The frequency spectrums of measured vibrations were calculated by using the Fast Fourier Transformation (FFT). The sums of the squares of the differences (SSD) of the spectrums were calculated to evaluate the change of the spectrums. The SuRE method was able to determine if the dimensions were changed in each case at all the selected points. The scanning laser vibrometer is not feasible to be used at the shop floor. However, the study demonstrated that a piezoelectric element attached to any of the grid points would be able to evaluate the completed machining process.     

Recent advances in the production of γ‐valerolactone from biomass‐derived feedstocks via heterogeneous catalytic transfer hydrogenation

γ‐valerolactone (GVL) is an important intermediate chemical with a wide range of applications as fuel, fuel additive and as a green solvent which has received a great deal of attentions from both academia and industry. This review aims to summarise the advances in conversion of renewable feedstocks into GVL through heterogeneous catalytic transfer hydrogenation (CTH) with a strong emphasis on discussing preparation, characterisation and performance of the catalysts in order to provide a better understanding of various catalytic systems and also to compare them in terms of catalytic performance. © 2017 Society of Chemical Industry