Stability during storage of LC-PUFA-supplemented infant formula containing single cell oil or egg yolk

The medical community recommends that infant formulae should mimic human milk as far as possible, particularly in regards to long-chain polyunsaturated fatty acids (LC-PUFA). These include arachidonic acid (AA) and docosahexaenoic acid (DHA), both of which provide biochemical and functional benefits to neonates. However, LC-PUFAs are highly susceptible to oxidation and the composition of formulae must be carefully controlled. In this study, the stability of two types of LC-PUFA-supplemented milk-based powdered infant formula was evaluated over the course of 18 months storage at 25 °C and 40 °C. One contained egg yolk phospholipids (IF-EPL) and the other contained triacylglycerides (DHA and AA) synthesized by single cell oils (IF-SCO). The following parameters were monitored: peroxide values, volatile content (propanal, pentanal and hexanal), fatty acid profiles, and potential and free furfural content (5-hydroxymethyl-2-furaldehyde and 2-furaldehyde). In addition, these formulae were subjected to sensory evaluations by a panel of experts. The parameters studied revealed acceptable lipid stability in both types of formula, with better results for IF-EPL. At the end of the study period, significant deficits (p < 0.05) in linoleic acid were noted in both formulae. However, no significant decreases were observed in the other fatty acids, including AA and DHA. In regards to furfural content, both formulae exhibited a similar increase, indicative of the typical Maillard reaction characteristic of products stored for long periods.     

Influence of the Oil Phase on the Microencapsulation by Complex Coacervation

The influence of oil type on the process yield, efficiency of encapsulation, particle size and morphological aspects of coacervated microparticles was investigated. Firstly, several factors affecting microencapsulation of oils by complex coacervation were simultaneously examined. The results indicated that the process yield is mainly dependent on the velocity of homogenization, temperature and polymer ratio. Using optimum conditions for producing microparticles [pH 4.0, 14,000 rpm, 50 °C, gelatin:gum arabic (GE:GA) 1:1 and 2.5 % w/v], different core materials were tested: a vegetable oil (almond oil), an oil with higher hydrophilic lipophilic balance (vetiver essential oil) and a highly hydrophobic oil (mineral oil). The oil phase exerted an influence on microparticle formation, disturbing the complexation of polymers and modifying the core distribution within the particles. Some of the polymers were complexed when mineral oil was used, and the highest efficiency of encapsulation (91.8 %) was obtained with vetiver oil, followed by the almond (70.6 %) and mineral (38.0 %) oils. Particles produced with vetiver oil were larger (43.5 μm) than those produced with mineral oil (35.0 μm) and almond oil (19.2 μm), and the increase in the size is due to the encapsulation of many small droplets of emulsion, characterizing these particles as multinucleate ones.     

Influence of Particle Size on Nonisothermal Crystallization in a Lithium Disilicate Glass

In this study, lithium disilicate (LS₂) glass samples with different particle sizes ranging from less than 105 to 850 μm were prepared. These specimens were inserted in a Pt‐Rh DSC crucible and heated to 850°C at different rates (? = 0.5–30 K/min) to identify their crystallization peaks. The activation energies for the overall crystallization (E) and the Avrami coefficient (n) were evaluated using different nonisothermal models. Specifically, n was evaluated using the Augis–Benett model and the Ozawa method, and E was evaluated using the Kissinger and Ligero methods. As expected, the coarse particles mainly crystallized in the volume, while surface crystallization was predominant in the samples with particle sizes of less than 350 μm. This result was confirmed through SEM analysis of the double stage heat‐treated samples. In contrast with previous studies, our results demonstrated that the activation energy decreased as the particle size increased. In addition, no clear correlation between the peak intensity (δT_p) and the particle size was observed.     

Evaluating vector data type usage in OpenCL kernels

Open Computing Language (OpenCL) is an open, functionally portable programming model for a large range of highly parallel processors. To provide users with access to the underlying platforms, OpenCL has explicit support for features such as local memory and vector data types (VDTs). However, these are often low‐level, hardware‐specific features, which can be detrimental to performance on different platforms. In this paper, we focus on VDTs and investigate their usage in a systematic way. First, we propose two different approaches (inter‐vdt and intra‐vdt) to use VDTs in OpenCL kernels, and show how to translate scalar OpenCL kernels to vectorized ones. After obtaining vectorized code, we evaluate the performance effects of using VDTs with two types of benchmarks: micro‐benchmarks and macro‐benchmarks. With micro‐benchmarks, we study the execution model of VDTs and the role of the compiler‐aided vectorizer on five devices. With macro‐benchmarks, we explore the changes of memory access patterns before and after using VDTs, and the resulting performance impact. Not only our evaluation provides insights into how OpenCL's VDTs are mapped on different processors, but it also indicates that using such data types introduces changes in both computation and memory accesses. Based on the lessons learned, we discuss how to deal with performance portability in the presence of VDTs. Copyright © 2014 John Wiley & Sons, Ltd.     

Analysing green supply chain management practices in Brazil’s electrical/electronics industry using interpretive structural modelling

Industries need to adopt the environmental management concepts in the traditional supply chain management. The green supply chain management (GSCM) is an established concept to ensure environment-friendly activities in industry. This paper identifies the relationship of driving and dependence that exists between GSCM practices with regard to their adoption within Brazilian electrical/electronic industry with the help of interpretive structural modelling (ISM). From the results, we infer that cooperation with customers for eco-design practice is driving other practices, and this practice acts as a vital role among other practices. Commitment to GSCM from senior managers and cooperation with customers for cleaner production occupy the highest level.     

Cleaner production in Romanian textile industry: a case study

This paper reports the changes resulting from adopting environmentally sensitive criteria in Novatextile Pitesti, Romania. The changes have improved the operation of the production plant and reduced costs at the same time.     

Implementing a multiskilled workforce

Recent studies show the construction industry in the USA is facing a long term labour shortage. Multiskilling has been suggested as a strategy to address this issue by utilizing existing workers more efficiently. Multiskilling decreases the number of workers hired for a project and can improve productivity. Additional benefits include higher income and increased employability of the workforce. To take full advantage of these benefits, the workforce strategy and the planning and scheduling processes of a construction project must be adapted to use multiskilling effectively and efficiently. The multiskilled workforce should be scheduled and organized to maximize the duration of employment for workers, reduce the overall labour requirements and cover the skills combinations required by the project. This research synthesizes and formalizes the methods that successful construction companies are currently applying to implement a multiskilled workforce. A methodology for implementing multiskilling is outlined as well.     

Polyethylene/Polycaprolactone Nanocomposite Films for Food Packaging Modified with Magnetite and Casein: Oxygen Barrier,Mechanical, and Thermal Properties

Polyethylene (PE) was modified and prepared as double-layer polyethylene/polycaprolactone (PE/PCL) film. Magnetite and casein were added to the PCL-coating film to improve barrier properties and prevent destruction of basic structure of primary polymer PE. Significant improvements were observed with regards to mechanical (tensile strength, elongation at break) and thermal properties, while barrier (O₂ permeability) properties were slightly improved. Overall migration values into acetic acid were lower (from 1 to 4.6 mg/dm²) than the upper limit set by the legislation. Specific migration of iron in PE/PCL-Fe samples is also below (µg/L) specific migration limit value set by the legislation (mg/kg).     

Effect of Silicon and Graphite Degeneration on High-Temperature Oxidation of Ductile Cast Irons in Open Air

Oxidation of Metals - The use of high silicon ductile irons is increasing as they offer some advantages with respect to conventional pearlitic–ferritic grades such as high elongation at...     

Preparation and properties of polyamide‐6‐based thermoplastic laminate composites by a novel in‐mold polymerization technique

In this work, a method for preparation of polyamide‐6 (PA6) based laminates reinforced by glass fiber‐ (GFL) or polyamide‐66 (PA66) textile structures (PL) via reactive injection molding is disclosed. It is based on in‐mold anionic polymerization of ε‐caprolactam carried out at 165°C in the presence of the respective reinforcements performed in newly developed prototype equipment whose design concept and operation are described. Both composite types were produced for reaction times of 20 min, with conversion degrees of 97–99%. Initial mechanical tests in tension of GFL samples displayed almost twofold increase of the Young's modulus and stress at break values when compared with the neat anionic PA6. The improvement was proportional to the volume fraction V_f of glass fiber fabric that was varied in the 0.16–0.25 range. A 300% growth of the impact strength was registered in PL composites with V_f of PA66 textile of 0.1. Removing the surface finish of the latter was found to be a factor for improving the adhesion at the matrix–fiber interface. The mechanical behavior of GFL and PL composites was discussed in conjunction with the morphology of the samples studied by optical and electron microscopy and the matrix crystalline structure as revealed by synchrotron X‐ray diffraction. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40083.