Identification of the new 18-hexacosenoic acid in the spongeThalysias juniperina

The phospholipid fatty acids from the spongeSpheciospongia cuspidifera were studied revealing the presence of the rare 10-octadecenoic acid (10−18∶1) and a new 2-methoxyhexadecenoic acid. The phospholipid fatty acids fromThalysias juniperina were also studied revealing the presence of the hitherto unreported 18-hexacosenoic acid (18−26∶1). These results tend to indicate that the biosynthetic pathway from 10−18∶1 to 18−26∶1 may be operative in nature. The phospholipid mixture from the sponges was also analyzed by³¹P-NMR and shown to mainly consist of phosphatidylethanolamine, phosphatidylserine, phosphatidylinositol, and phosphatidylglycerol. Phosphatidylcholine was not found in the sponges analyzed in this work.     

A search for optimal acrylic carriers for immobilization of penicillin acylase

Acrylic carriers were obtained by aminolysis of nitrile or ester groups in copolymers or terpolymers synthesized from acrylonitrile, acrylic esters and divinylbenzene or ethylene dimethacrylate in the presence of a mixture of inert diluents. The influence of the supermolecular structure of these carriers, generated during the suspension polymerization by adding a mixture of inert diluents, on the carrier properties was observed. Acrylic carriers for immobilization of penicillin acylase should be obtained from either porous or ‘sol’-type copolymers which aquire after aminolysis the structure of expanded gel.     

News: United Kingdom to set air quality emission standards

Government.     

Trapping of soursop (Annona muricata) juice volatiles on porapak Q by suction

The trapping technique of Singleton and Pattee, in which the volatiles are swept to a Porapak Q trap by suction rather than by a sweeping gas, was modified and used to isolate soursop juice volatiles. Using fixed, low vacuum and operating conditions determined specifically for soursop volatiles, very high reproducibility was obtained. The majority of the peaks had a coefficient of variation less than 0.10. The relative amounts of the volatile components obtained by direct headspace sampling was fairly well maintained in the Porapak Q concentrate. The chromatograms showed distinct differences between two commercial brands or between lots of the same brand of soursop juice. The trapping technique appear to have wide applicability provided that the operating conditions are adapted to each product studied.     

Performance Evaluation of Video Streaming Over Ad Hoc Networks Using Flat and Hierarchical Routing Protocols

A performance evaluation of real time services (such as video streaming) over mobile ad-hoc networks using both hierarchical and flat routing protocols is shown in this paper. A variety of workload and scenarios, as characterized by mobility, load and size of the ad hoc network have been simulated using NS-2. We use OLSR (Optimized Link State Protocol) as the flat routing protocol and our own implementation of HOLSR (Hierarchical OLSR)—which uses HNA (Host and Network Association) messages—as the hierarchical one, modifying other previous HOLSR version and maintaining the maximum compatibility with the flat OLSR. We carry out a complete comparison between these protocols focused on video evaluation. The simulation lets us compare the quality of service (QoS) of the video streaming paying attention to objective parameters (PSNR, packet delivery ratio, packet delay and interruptions). Some drawbacks of the hierarchical environment are also analyzed, as the link load between cluster heads and the lack of QoS-state-aware in HOLSR design. Quantitative results indicate that the protocol overhead is reduced (more than 40% in larger networks) and the video quality is improved (from 1 to 6 dB in certain cases) using hierarchical protocols.     

Microstructure and domain configurations in ferroelectric PbTiO3 and Pb(Zr,Ti)O3 thin fims

Ferroelectric domain configurations in PbTiO₃ and Pb(Zr_xT_1−x)O₃ (PZT, x = 0.3 or 0.5) thin films have been studied by transmission electron microscopy. The PbTiOg and PZT thin films have been deposited by the ionized cluster beam technique and radio frequency sputtering, respectively. The grain size in these thin films is typically less than 0.5 μm. Lamellar 90°-domain features have been observed in both PbTiO₃ and PZT (30/70) samples. The domain walls correspond to the {011} twin boundaries. La-doping and Ca-modification are shown to affect the microstructure of the PZT films. No clear domain feature occurs in the PZT thin film that has composition near the morphotropic phase boundary. The effects of grain sizes are briefly discussed.     

Bio-cellular processes modeling on silicon substrate: receptor–ligand binding and Michaelis Menten reaction

Reducing transmit power is the most straightforward way towards more energy-efficient communications, but it results in lower SNRs at the receiver which can add a performance and/or complexity cost. At low SNRs, synchronization and channel estimation errors erode much of the gains achieved through powerful turbo and LDPC codes. Further expanding the turbo concept through an iterative receiver—which brings synchronization and equalization modules inside the loop—can help, but this solution is prohibitively complex and it is not clear what can and what cannot be a part of the iterative structure. This paper fills two important gaps in this field: (1) as compared to previous research which either focuses on a subset of the problem assuming perfect remaining parameters or is computationally too complex, we propose a proper partitioning of algorithm blocks in the iterative receiver for manageable delay and complexity, and (2) to the best of our knowledge, this is the first physical demonstration of an iterative receiver based on experimental radio hardware. We have found that for such a receiver to work, (1) iterative timing synchronization is impractical, iterative carrier synchronization can be avoided by using our proposed approach, while iterative channel estimation is essential, and (2) the SNR gains claimed in previous publications are validated in indoor channels. Finally, we propose a heuristic algorithm for simplifying the carrier phase synchronization in an iterative receiver such that computations of the log likelihood ratios of the parity bits can be avoided to strike a tradeoff between complexity and performance.     

Pacemaker interference by magnetic fields at power line frequencies

Human exposure to external 50/60-Hz electric and magnetic fields induces electric fields within the body. These induced fields can cause interference with implanted pacemakers. In the case of exposure to magnetic fields, the pacemaker leads are subject to induced electromotive forces, with current return paths being provided by the conducting body tissues. Modern computing resources used in conjunction with millimeter-scale human body conductivity models make numerical modeling a viable technique for examining any such interference. In this paper, an existing well-verified scalar-potential finite-difference frequency-domain code is modified to handle thin conducting wires embedded in the body. The effects of each wire can be included numerically by a simple modification to the existing code. Results are computed for two pacemaker lead insertion paths, terminating at either atrial or ventricular electrodes in the heart. Computations are performed for three orthogonal 60-Hz magnetic field orientations. Comparison with simplified estimates from Faraday's law applied directly to extracorporeal loops representing unipolar leads underscores problems associated with this simplified approach. Numerically estimated electromagnetic interference (EMI) levels under the worst case scenarios are about 40 microT for atrial electrodes, and 140 microT for ventricular electrodes. These methods could also be applied to studying EMI with other implanted devices such as cardiac defibrillators.