AlGaN-based quantum-well heterostructures for deep ultraviolet light-emitting diodes grown by submonolayer discrete plasma-assisted molecular-beam epitaxy

Features of plasma-assisted molecular-beam epitaxy of AlGaN compounds at relatively low temperatures of the substrate (no higher than 740°C) and various stoichiometric conditions for growth of the nitrogen- and metal-enriched layers are studied. Discrete submonolayer epitaxy for formation of quantum wells and n-type blocking layers without varying the fluxes of components was used for the first time in the case of molecular- beam epitaxy with plasma activation of nitrogen for the nanostructures with the Al _x Ga_{1 ? x} N/Al _y Ga_{1 ? y} N quantum wells. Structural and optical properties of the Al _x Ga_{1 ? x} N layers in the entire range of compositions (x = 0–1) and nanostructures based on these layers are studied; these studies indicate that there is photoluminescence at room temperature with minimum wavelength of 230 nm. Based on the analysis of the photoluminescence spectra for bulk layers and nanoheterostructures and their temperature dependences, it is concluded that there are localized states in quantum wells. Using the metal-enriched layers grown on the c-Al₂O₃ substrates, heterostructures for light-emitting diodes with Al _x Ga_{1 ? x} N/Al _y Ga_{1 ? y} N quantum wells (x = 0.4–0.5, y = x + 0.15) were obtained and demonstrated electroluminescence in the ultraviolet region of the spectrum at the wavelength of 320 nm.     

Comparative Study of Rubidium and Cesium as Promoters in Carbon-supported Ruthenium Catalysts for Ammonia Synthesis

Sibunit-supported Ru-catalysts promoted with cesium or rubidium compounds have been comparatively studied with XPS. The cesium promoter interacts both with support and with active component. The absence of the promoter–support interaction in the case of rubidium provides a stronger interaction between promoter and active component compared to the cesium-based catalysts. These differences in the promoter–support and promoter–metal interactions are exhibited when a sequence of ruthenium and alkali introduction are changed.     

Some sulfides of gold and silver: Composition,mineral mineral assemblage,and conditions of formation

Characteristic mineral assemblage and special features of the composition of Au and Ag sulfides of gold-silver deposits have been established. The forms of the occurrence of Au and Ag in the minerals of the early and last stages have been analyzed. The conditions for the formation of uytenbogaardtite and petrovskaite in supergene and low-temperature hydrothermal processes have been considered. A thermodynamic model explaining their genesis in the oxidation zones is presented.     

An efficient electron-beam-pumped semiconductor laser for the green spectral range based on II–VI multilayer nanostructures

Emission characteristics of an electron-beam-pumped Cd(Zn)Se/ZnMgSSe semiconductor laser are studied. The laser’s active region consists of a set of ten equidistant ZnSe quantum wells containing fractional-monolayer CdSe quantum-dot inserts and a waveguide formed by a short-period superlattice with the net thickness of ～0.65 μm. Lasing occurs at room temperature at a wavelength of 542 nm. Pulsed power as high as 12 W per cavity face and an unprecedentedly high efficiency of ～8.5% are attained for the electron-beam energy of 23 keV.     

Distribution of investments in the stock market, information types, and algorithmic complexity

For a simplest mathematical model of a stock market, the problem of optimal distribution of investments among different securities (stocks, bonds, etc.) is considered. Our results, which are obtained in terms of algorithmic complexity, allow to discuss heuristically the properties of sufficiently complex security portfolios in the conditions of daily changing return rates. All considerations are given in the combinatorial framework and do not use any probabilistic models.     

Hydrogen reduction kinetics of electrometallurgical slime

The interaction of hydrogen with the zinc-containing electrometallurgical slime of the Severstal’ metallurgical works has been studied. The sequence of transformations in the slime heated to 1100°C in hydrogen or air has been established. The experimental and calculated weight losses coincide. Some of the carbonates are shown to decompose in the temperature range 300–700°C, and most iron and zinc oxides are reduced to a metal. In the temperature range 650–850°C, zinc is almost completely sublimated. At temperatures above 800°C, complex oxides are reduced and calcium and magnesium carbonates and sulfates are likely to decompose. Experimental digital data on the zinc sublimation rate are processed by the least squares method with approximating equations used in thermal analysis. The kinetics of nonisothermal zinc sublimation is comprehensively analyzed using a unique procedure developed for taking into account the background of a peak and the effect of accompanying processes. An equation for the calculation of the zinc sublimation rate under experimental conditions (fluidized bed) is given and tested.     

Characteristics of tunneling and impact ionization in ZnS:Mn-based thin-film electroluminescent structures

A method for measuring the characteristics of tunneling and impact ionization in thin-film electroluminescent emitters is suggested. This method makes it possible to find time dependences of the space-charge layer thickness near the anode and the length of the impact ionization region, to determine more exactly the time dependence of the field in the potential barrier at the cathode interface, the maximum depth of the surface states from which electron tunneling occurs, the minimum thickness of the barrier, and the electron tunneling probability, as well as the impact ionization rate for the deep centers related to structural defects of the phosphor layer.     

Catalytic properties of composite amorphous carbon-platinum layers in fuel cells

Catalytic properties of composite amorphous carbon-platinum layers produced by magnetron cosputtering have been studied. The layers were characterized by electron microscopy, IR spectroscopy, ellipsometry, gravimetry, and spectrophotometric chemical analysis. The catalytic activity of the layers was studied in an air-hydrogen fuel cell by measuring its load and power characteristics.     

Thin-film nickel coatings on fiber materials

Vacuum deposition of thin films onto fiber materials is a promising method of obtaining electromagnetic screens. We have studied the structure and the electromagnetic properties of machine-knitted fabric coated with nickel by means of magnetron sputtering. When the fabric is irradiated from the metal-coated side, the reflection coefficient is higher by a factor of 1.4 as compared to the case when the same source of electromagnetic radiation is situated on the opposite side (facing the uncoated surface), while the absorption coefficient in both cases is the same.