The effect of external flow on the feeding currents of sessile microorganisms

Microscopic sessile suspension feeders live attached to surfaces and, by consuming bacteria-sized prey and by being consumed, they form an important part of aquatic ecosystems. Their environmental impact is mediated by their feeding rate, which depends on a self-generated feeding current. The feeding rate has been hypothesized to be limited by recirculating eddies that cause the organisms to feed from water that is depleted of food particles. However, those results considered organisms in still water, while ambient flow is often present in their natural habitats. We show, using a point-force model, that even very slow ambient flow, with speed several orders of magnitude less than that of the self-generated feeding current, is sufficient to disrupt the eddies around perpendicular suspension feeders, providing a constant supply of food-rich water. However, the feeding rate decreases in external flow at a range of non-perpendicular orientations due to the formation of recirculation structures not seen in still water. We quantify the feeding flow and observe such recirculation experimentally for the suspension feeder Vorticella convallaria in external flows typical of streams and rivers.     

CW-diode laser crystallization of sputtered amorphous silicon on glass, SiNx, and SiO2 intermediate layers

CW-diode laser crystallization of amorphous silicon (a-Si) deposited by sputtering or by electron beam evaporation onto different substrates (glass without or with SiN_x or SiO₂ intermediate layers) is investigated. The resulting grain sizes and orientations are characterized by electron backscatter diffraction, optical microscopy, and x-ray diffraction. We demonstrate that 200 nm thick sputtered a-Si layers can be crystallized on all of the used substrates to result in grains from 1 up to 100 μm in size, depending on the laser irradiation parameters (intensity, exposure time). Electron beam evaporated a-Si films can be crystallized only on sputtered SiN_x intermediate layers to result in grains of 100 μm in size. Similar crystallographic film properties follow from laser treatment if the product of laser peak intensity and square root of exposure time is kept constant, independent of the scan velocity used. A high fraction of preferred (100)-oriented silicon grains can only be observed for samples with crystallites less than 10 μm in size.     

Characterisation of CO/NO/SO2 emission and ash-forming elements from the combustion and pyrolysis process

Bioenergy is considered as a sustainable energy which can play a significant role in the future’s energy scenarios to replace fossil fuels, not only in the heat production, but also in the electricity and transportation sectors. Emission formation and release of main ash-forming elements during thermal conversion of biomass fuels at different conditions have been the scope of this study. The experiments were conducted in a quartz glass reactor where the temperature and atmosphere could be controlled. The selected fuels represent a wide range of biomass compositions. They are torrefied softwood, spruce bark, waste wood, miscanthus, and wheat straw. The fuels were first grinded and then pressed with a pellet maker into pellets of the same size and weight. For each fuel, the experiments were carried out under both oxidation and pyrolysis condition, with atmosphere of 3 % O₂ + 97 % N₂ and 100 % N₂, respectively, at four residence times. The selected temperatures under which experiments were performed are 800, 900, and 1,050 °C. The concentration of SO₂, NO, CO, and CO₂ emissions and O₂ were monitored online by three analysers, simultaneously. The residue weight was measured after each process, and the comparison with the ash content of the fresh pellet is made. Additionally, the release of several ash-forming elements (K, Zn, Na, and Mn) from the fuels has been quantified as function of temperature and residence time by inductively coupled plasma mass spectrometry (ICP-MS) and inductively coupled plasma atomic emission spectroscopy (ICP-AES). Time-dependent formation of NO and SO₂ and other emissions is presented and discussed with respect to different temperature and combustion conditions.     

Solubilisation of calcium and magnesium from the marine red algae Lithothamnion calcareum

Marine minerals are a potential source of calcium and magnesium for nutritional supplementation. This study analysed the solubilisation of calcium and magnesium from the skeletal remains of Lithothamnion calcareum. Scanning electron microscopy analysis demonstrated a nonporous microstructure. Spectrophotometric determination showed that the calcium and magnesium contents were 30.01 and 6.22% (w/w), respectively. Solubilisation of calcium and magnesium was highly pH dependent. The temperature‐dependent solubilisation of calcium fitted the shrinking core model. The apparent activation energy for calcium solubilisation was 28.6 kJ mol^?1. Inclusion of caseinophosphopeptides (CPPs), casein‐derived mineral binding peptides, during the solubilisation of calcium and magnesium appeared to decrease the extent of calcium solubilisation at pH 6.0 and 8.0. The results herein have implications for the choice of optimal pH conditions for the sustained release of calcium and magnesium from marine mineral sources.     

Adaptive controller placement for wireless sensor–actuator networks with erasure channels

Wireless sensor–actuator networks offer flexibility for control design. One novel element which may arise in networks with multiple nodes is that the role of some nodes does not need to be fixed. In particular, there is no need to pre-allocate which nodes assume controller functions and which ones merely relay data. We present a flexible architecture for networked control using multiple nodes connected in series over analog erasure channels without acknowledgments. The control architecture proposed adapts to changes in network conditions, by allowing the role played by individual nodes to depend upon transmission outcomes. We adopt stochastic models for transmission outcomes and characterize the distribution of controller location and the covariance of system states. Simulation results illustrate that the proposed architecture has the potential to give better performance than limiting control calculations to be carried out at a fixed node.     

Broccoli leaf powder as an attractive by-product ingredient: effect on batter behaviour,technological properties and sensory quality of gluten-free mini sponge cake

Broccoli by-products, in particular leaves, are rich sources of nutritional and bioactive components thus could constitute a valuable food additive. Although an upsurge in quantity of gluten-free products is observed further studies are required on improvement of their nutritional quality and palatability. This study aimed to investigate the influence of broccoli leaf powder (BLP) on dough behaviour, and technological characteristics and sensory quality of gluten-free mini sponge cake (GFS). Broccoli leaf powder replaced an equivalent amount (2.5%, 5%, 7.5%; w/w) of corn and potato starches in GFS formulation. Applied BLP increased the instrumental firmness of GFS but sensorial attributes (elasticity, crustiness, mastication and adhesiveness) were similar to the control. All broccoli GFS were vividly green, had small size pores properly distributed. Among them, sample with 2.5% BLP was distinguished for its desirable sensory quality, despite a slightly perceived cabbage aroma and taste. Moderate amount of BLP allows to preserve a good quality GFS improving its attractiveness and palatability.     

Investigation of the Equivalence of National Dew-Point Temperature Realizations in the ?50?°C to +?20?°C Range

In the field of humidity quantities, the first CIPM key comparison, CCT-K6 is at its end. The corresponding European regional key comparison, EUROMET.T-K6, was completed in early 2008, about 4?years after the starting initial measurements in the project. In total, 24 NMIs from different countries took part in the comparison. This number includes 22 EURAMET countries, and Russia and South Africa. The comparison covered the dew-point temperature range from ?50?°C to +20?°C. It was carried out in three parallel loops, each with two chilled mirror hygrometers as transfer standards in each loop. The comparison scheme was designed to ensure high quality results with evenly spread workload for the participants. It is shown that the standard uncertainty due to the long-term instability was smaller than 0.008?°C in all loops. The standard uncertainties due to links between the loops were found to be smaller than 0.025?°C at ?50?°C and 0.010?°C elsewhere. Conclusions on the equivalence of the dew-point temperature standards are drawn on the basis of calculated bilateral degrees of equivalence and deviations from the EURAMET comparison reference values (ERV). Taking into account 16 different primary dew-point realizations and 8 secondary realizations, the results demonstrate the equivalence of a large number of laboratories at an uncertainty level that is better than achieved in other multilateral comparisons so far in the humidity field.     

Failure of Titanium Condenser Tubes After 24 Years Power Plant Service

The titanium condenser has been in operation for 24 years at Amager unit 3 power plant. In February 2012, the plant was contaminated by seawater due to a failed condenser tube and some tubes were plugged. A month later, the plant tripped again. Small leaks were found again and finally approx. 200 tubes were plugged before the condenser was in service again. A series of inspections, NDT, and destructive examinations were conducted to try and understand the cause of failure in the tubes within the condenser. After such investigations, degradation mechanisms such as inner fouling, steam impingement, and fretting/erosion around the supports could be discounted. Ductile cracks were found in the tube within the tubesheet. From circumstantial evidence, it was concluded that failure was caused by a semi-filled condenser which led to a mismatch in expansion coefficients of filled tubes and unfilled tubes during a plant trip. In addition, small amounts of titanium hydride were revealed to be present in the tubes within the tubesheet indicating that the carbon steel tubesheet was corroding due to ingress of salt water. Although this was not the reason for the failure, it indicated the need for repair of the epoxy coating in the waterbox.