不同脱毒方法对玉米秸秆水解液酒精发酵的影响

利用湿热预处理(195℃,15 min)后的玉米秸秆水解液,考察了3种不同脱毒方法(中和法、饱和生石灰法和Na2SO3法)对水解液中的抑制剂的去除效果,研究了树干毕赤酵母(Pichia stipitis 58376)对脱毒后的水解液酒精发酵情况.结果表明:玉米秸秆水解液经过3种方法脱毒处理后,醛类抑制荆(糠醛和5-羟甲...     

Microwave assisted click chemistry on a conductive polymer film

Microwave (MW) irradiation has been used to accelerate the functionalization of an azide functional poly(3,4-ethylenedioxythiophene) film by click chemistry. The absorption of MW energy by the conductive polymer has been exploited for localized activation of the reaction on the polymer surface. By use of an alkyne modified fluorescein derivative the reaction conditions have been optimized in a conventional MW oven, enabling the use of different sizes of substrates. The optimization resulted in a reduction of reaction times of approximately 20 h to only 2 min for bulk film functionalization. The method has been applied for anchoring of the chelating agent nitrilotriacetic acid (NTA) on the conductive polymer. The chelating linkage ability of NTA on the surface was investigated through a sandwich ELISA study confirming the selective bonding of a histidine tagged protein.     

Dynamical systems and topology optimization

This paper uses a dynamical systems approach for studying the material distribution (density or SIMP) formulation of topology optimization of structures. Such an approach means that an ordinary differential equation, such that the objective function is decreasing along a solution trajectory of this equation, is constructed. For stiffness optimization two differential equations with this property are considered. By simple explicit Euler approximations of these equations, together with projection techniques to satisfy box constraints, we obtain different iteration formulas. One of these formulas turns out to be the classical optimality criteria algorithm, which, thus, is receiving a new interpretation and framework. Based on this finding we suggest extensions of the optimality criteria algorithm. A second important feature of the dynamical systems approach, besides the purely algorithmic one, is that it points at a connection between optimization problems and natural evolution problems such as bone remodeling and damage evolution. This connection has been hinted at previously but, in the opinion of the authors, not been clearly stated since the dynamical systems concept was missing. To give an explicit example of an evolution problem that is in this way connected to an optimization problem, we study a model of bone remodeling. Numerical examples, related to both the algorithmic issue and the issue of natural evolution represented as bone remodeling, are presented.     

Social influence during the initial phase of a fire evacuation—Analysis of evacuation experiments in a cinema theatre

Unannounced evacuation experiments in a cinema theatre were analysed. The analysis focused on investigating if people are influenced by others during the initial phase of a fire evacuation. This type of influence is called social influence. Three separate behaviour types were identified and studied and the recognition and pre-movement time was measured. The results suggest that social influence is an important factor and that it becomes more important when the fire cue, e.g., the alarm, is unclear or uninformative. Results also indicate that social influence increases with decreasing distance between visitors. This result implies that individuals are influenced more by people who are close than by people who are further away.     

Low-voltage terahertz quantum-cascade lasers based on LO-phonon-assisted interminiband transitions

A report is presented on GaAs/(Al,Ga)As terahertz (THz) quantum-cascade lasers (QCLs) based on alternating photon and longitudinal optical (LO) phonon-assisted transitions between quasi-minibands. The design is optimised for low threshold current densities and low operating voltages, resulting in reduced ohmic heating during continuous-wave (CW) operation. The QCLs exhibit lasing over a broad range of frequencies from 2.91 to 3.21 THz. Using single-plasmon waveguides, pulsed operation up to 114 K and CW operation up to 65 K has been achieved.     

Plant fibre composites – porosity and stiffness

Plant fibre composites contain typically a relatively large amount of porosity which influences their performance. A model, based on a modified rule of mixtures, is presented to include the influence of porosity on the composite stiffness. The model integrates the volumetric composition of the composites with their mechanical properties. The fibre weight fraction is used as an independent parameter to calculate the complete volumetric composition. A maximum obtainable stiffness of the composites is calculated at a certain transition fibre weight fraction, which is characterised by a best possible combination of high fibre volume fraction and low porosity. The model is validated with experimental data from the literature on several types of composites. A stiffness diagram is presented to demonstrate that the calculations can be used for tailoring and design of composites with a given profile of properties.     

Development of Mechanical Anchor for CFRP Tendons Using Integrated Sleeve

A durable and very efficient external strengthening system is achieved if steel tendons for posttensioning applications can be replaced with carbon fiber-reinforced polymer (CFRP) tendons, and if reliable anchorage systems are developed. This paper presents a newly developed and simple-to-use, two-piece wedge anchorage for CFRP tendons with an integrated sleeve and a differential angle between barrel and wedge sections. Three longitudinal slits are cut into the one-piece wedge, with one slit open and the other two stopping 1 mm from the inner wedge hole. The integrated sleeve holds the wedge’s sections together during presetting and loading, resulting in a circumferential confined gripping of the CFRP tendon and optimized surface friction area. Therefore, the one-piece wedge differs from conventional wedge systems, where the wedges act separately with adjacent spaces, wedging the separate tendon sleeve in the longitudinal direction. Evaluation of the failure modes during testing was one of the main keys in achieving an increasingly better performance of the anchorage until the final anchorage was developed. The obtained failure modes are therefore described to enlighten the importance of addressing them when testing. The test setup used and measured behavior are described further together with the loading procedure. The anchorage reached the full capacity of the CFRP tendon and was seen to ensure a stable load of fracture.