Correlation among sintering process,porosity, and creep deformation of refractory concrete

The aim of this paper is to establish the correlation among sintering process, porosity, and important thermo-mechanical property of refractory concrete, i.e., creep. Creep deformation was investigated according to the standard laboratory procedure applied at three temperatures: 1200, 1300, and 1400 °C. Corundum and bauxite-based refractory concretes were investigated. The concretes are varying in chemical and mineralogical composition. Both loss of strength and degradation of material occur when refractory concrete is subjected to increased temperature and compressive static load. Measuring of thermo-mechanical properties can indicate and monitor the changes within microstructure. Variation of refractory concrete microstructure, as a consequence of sintering process, during exposure to constant compressive load and constant elevated temperature during certain time-intervals was investigated using scanning electron microscope and Image Pro Plus program for image analysis. Obtained results of the investigation proved that creep can be useful method when type of refractory concrete is to be chosen for an application.     

Adsorption kinetics and mechanical properties of thiol-modified DNA-oligos on gold investigated by microcantilever sensors

Immobilised DNA-oligo layers are scientifically and technologically appealing for a wide range of sensor applications such as DNA chips. Using microcantilever-based sensors with integrated readout, we demonstrate in situ quantitative studies of surface-stress formation during self-assembly of a 25-mer thiol-modified DNA-oligo layer. The self-assembly induces a surface-stress change, which closely follows Langmuir adsorption model. The adsorption results in compressive surface-stress formation, which might be due to intermolecular repulsive forces in the oligo layer. The rate constant of the adsorption depends on the concentration of the oligo solution. Based on the calculated rate constants a surface free energy of the thiol-modified DNA-oligo adsorption on gold is found to be -32.4 kJ mol(-1). The adsorption experiments also indicate that first a single layer of DNA-oligos is assembled on the gold surface after which a significant unspecific adsorption takes place on top of the first DNA-oligo layer. The cantilever-based sensor principle has a wide range of applications in real-time local monitoring of chemical and biological interactions as well as in the detection of specific DNA sequences, proteins and particles.     

Reversible acetonitrile-induced inactivation/activation of thermolysin

Thermolysin is catalytically inactive in mixtures of 10-15 % acetonitrile in aqueous buffer. Unexpectedly, dilution of the inactive enzyme with acetonitrile leads to complete recovery of the catalytic activity in a similar way to dilution with aqueous buffer. Circular dichroism and fluorescence studies of thermolysin in the same solvent mixtures reveal discontinuous changes in the overall secondary and tertiary protein structure that correlate well with the reversible differences in catalytic activity. The spectra on either side of the minimum activity point are different from each other, a fact indicating that the enzyme may be able to access two active conformations which are thermodynamically stable in different solvent environments.     

KlROM2 encodes an essential GEF homologue in Kluyveromyces lactis

Cellular integrity in yeasts is ensured by a rigid cell wall whose synthesis is controlled by a MAP kinase signal transduction cascade. In Saccharomyces cerevisiae upstream regulatory components of this MAP kinase pathway involve a single protein kinase C, which is regulated in part by interaction with the small GTPase Rho1p. This small G protein is in turn rendered inactive (GDP-bound) or is activated (GTP-bound) by the influence of GTPase activating proteins (GAPs) and the GDP/GTP exchange factors (GEFs), respectively. We report here on the isolation of a gene from Kluyveromyces lactis, KlROM2, which encodes a member of the latter protein family. The nucleotide sequence contains an open reading frame of 1227 amino acids, with an overall identity of 57% to the Rom2 protein of S. cerevisiae. Four conserved sequence motifs could be identified: a RhoGEF domain, a DEP sequence, a CNH domain and a less conserved pleckstrin homology (PH) sequence. Klrom2 null mutants show a lethal phenotype, which indicates that the gene may encode the only functional GEF regulating the cellular integrity pathway in K. lactis. Conditional genomic expression of KlROM2 resulted in sensitivity towards caffeine and Calcofluor white as typical phenotypes of mutants defective in this pathway. Overexpression of KIROM2 from multicopy plasmids under the control of the ScGAL1 promoter severely impaired growth in both S. cerevisiae and in K. lactis. The fact that the lethal phenotype was not prevented in mpk1 deletion mutants indicates that growth inhibition is not simply caused by hyperactivation of the Pkc1p signal transduction pathway.     

On-line coupling of size exclusion chromatography with electrospray ionization-tandem mass spectrometry for the analysis of aquatic fulvic and humic acids

A method was developed for the analysis of humic and fulvic acids by size-exclusion chromatography-electrospray ionization-tandem mass spectrometry using a completely volatile eluent. Humic and fulvic acids were separated into three peaks. These fractions occupied different mass ranges and showed differences in the fine structure of their mass spectra. The low-molecular-weight (LMW) fraction of fulvic acids is most sensitively determined by ESI-MS, and it appears that previous results obtained by infusion-ESI-MS were primarily determined by this fulvic acid fraction. The average molecular weight of this fractions turned out to be lower than that reported from infusion-ESI-MS measurements. Its scan spectra and the product ion spectra of some of its molecular anions perfectly match those previously obtained from whole fulvic acid mixtures. Obviously, a class of well-defined polycarboxylated molecules exist that occurs in all fulvic acid fractions thus far investigated. With decreasing elution time and increasing molecular weight, detection by ESI-MS loses sensitivity as compared to the parallel UV recording, and the fine structure of the scan spectra becomes increasingly uniform for both fulvic and humic acids. The average molecular weight of the HMW fraction exceeds those values calculated from infusion experiments. Scan spectra and product ion spectra of the high-molecular-weight (HMW) fraction of both the humic and the fulvic acids suggest that the HMW fraction consists of several subunits that originate from the LMW fraction.     

Interactive lectures: Effective teaching and learning in lectures using wireless networks

Among the severe instructional shortcomings of lectures is their lack of interactivity. To overcome these problems, the learning environment of the interactive lecture is introduced, in which students and lecturer interact by using mobile computers in a wireless network. In an experimental study, 44 students participated in interactive and in conventional lecture meetings. A quiz service that allowed question to be posted, students’ answers to be evaluated, and the results to be presented graphically, was implemented on mobile computers. The participants rated the interactive condition better, also reporting higher levels of attention, activity and perceived learning success for this condition. Objective measures indicated a slight but insignificant difference toward better learning results in the interactive condition.     

Model for knowledge and legal expert systems

This paper presents a four layer model for working with legal knowledge in expert systems. It distinguishes five sources of knowledge. Four contain basic legal knowledge found in published and unpublished sources. The fifth consists of legal metaknowledge. In the model the four basic legal knowledge sources are placed at the lowest level. The metaknowledge is placed at levels above the other four knowledge sources. The assumption is that the knowledge is represented only once. The use of metaknowledge at various levels should make it possible to use the appropriate knowledge for the problem presented to the system. The knowledge has to be represented as closely to the original format as possible for this purpose. Suitable representation formalisms for the various types of knowledge in the five knowledge sources are discussed. It is not possible to indicate a best representation formalism for each knowledge source.     

Science and technology in the region: The output of regional science and technology, its strengths and its leading institutions

Summary We operationalize scientific output in a region by means of the number of articles (as in the SciSearch database) per year and technology output by means of the number of patent applications (as in the database of the European Patent Office) per priority year. All informetric analyses were done using the DIALOG online-system. The main research questions are the following: Which scientific and technological fields or topics are most influent within a region and which institutions or companies are mainly publishing articles or holding patents? Do the distributions of regional science and technology fields and of publishing institutions follow the well-known informetric function? Are there - as it is expected - only few fields and few institutions which dominate the region? Is there a connection between the economic power of a region and the regional publication and patent output? Examples studied in detail are seven German regions: Aachen, Düsseldorf, Hamburg, Köln (Cologne), Leipzig - Halle - Dessau, München (Munich), and Stuttgart. Three different indicators were used, science and technology attraction of a region (number of scientific articles and patents), science and technology intensity (articles and patents per 1,000 inhabitants), and science and technology density (articles and patents per 1 billion EURO gross value added). Top region concerning both attraction and intensity is Munich, concerning density it is Aachen.