Electroantennographic and behavioral responses of the sphinx moth Manduca sexta to host plant headspace volatiles

Coupled gas chromatography with electroantennographic detection (GC-EAD) using antennae of adult female Manduca sexta was employed to screen for olfactory stimulants present in headspace collections from four species of larval host plants belonging to two families: Solanaceae—Lycopersicon esculentum (tomato), Capiscum annuum (bell pepper), and Datura wrightii; and Martyniaceae—Proboscidea parviflora. Headspace volatiles were collected from undamaged foliage of potted, living plants. GC–EAD revealed 23 EAD-active compounds, of which 15 were identified by GC-mass spectrometry. Identified compounds included aliphatic, aromatic, and terpenoid compounds bearing a range of functional groups. Nine EAD-active compounds were common to all four host plant species: (Z)-3-hexenyl acetate, nonanal, decanal, phenylacetaldehyde, methyl salicylate, benzyl alcohol, geranyl acetone, (E)-nerolidol, and one unidentified compound. Behavioral responses of female moths to an eight-component synthetic blend of selected tomato headspace volatiles were tested in a laboratory wind tunnel. Females were attracted to the blend. A comparison of responses from antennae of males and females to bell pepper headspace volatiles revealed that males responded to the same suite of volatiles as females, except for (Z)-3-hexenyl benzoate. EAD responses of males also were lower for (Z)- and (E)-nerolidol and one unidentified compound. Electroantennogram EAG dose–response curves for the 15 identified EAD-active volatiles were recorded. At the higher test doses (10–100 g), female antennae yielded larger EAG responses to terpenoids and to aliphatic and aromatic esters. Male antennae did respond to the higher doses of (Z)-3-hexenyl benzoate, indicating that they can detect this compound. On the basis of ubiquity of the EAD-active volatiles identified to date in host plant headspace collections, we suggest that M. sexta uses a suite of volatiles to locate and identify appropriate host plants.     

Interlaboratory study on lipid oxidation during accelerated storage trials with rapeseed and sunflower oil analyzed by conjugated dienes as primary oxidation products

Accelerated storage tests are frequently used to assess the oxidative stability of foods and related systems due to its reproducibility. Various methods and experimental conditions are used to measure lipid oxidation. Differences between laboratories make it necessary to determine the repeatability and reproducibility of oxidation tests performed under the same conditions. The objective of the present interlaboratory study was to evaluate the outcome of a storage test for two different bulk oils, sunflower oil (SFO) and rapeseed oil (RSO), during a period of 9 weeks at 20°C, 30°C, 40°C, and 60°C. Sixteen laboratories were provided with bottled oils and conducted the storage tests according to a detailed protocol. Lipid oxidation was monitored by the formation of conjugated dienes (CD) and the activation energy (E_a) was determined for comparative purposes and statistically evaluated. An increase in CD formation was observed for both oils when the storage temperature was increased in all laboratories. The E_a,1 ranged from 47.9 to 73.3 kJ mol⁻¹ in RSO and from 27.8 to 62.6 kJ mol⁻¹ in SFO, with average values of 58.2 and 46.8 kJ mol⁻¹, respectively. The reproducibility coefficients were 10.9% and 18.2% for RSO and SFO, respectively. Practical applications: In order to compare results on oxidative stability of foods derived from different studies, the reproducibility of storage tests and methods employed to evaluate the oxidation level should be considered. This study provides fundamental data on the reproducibility of lipid oxidation under accelerated storage conditions and defines important parameters to be considered for the conduction of experiments.     

Novel Type II Fatty Acid Biosynthesis (FAS II) Inhibitors as Multistage Antimalarial Agents

Malaria is a potentially fatal disease caused by Plasmodium parasites and poses a major medical risk in large parts of the world. The development of new, affordable antimalarial drugs is of vital importance as there are increasing reports of resistance to the currently available therapeutics. In addition, most of the current drugs used for chemoprophylaxis merely act on parasites already replicating in the blood. At this point, a patient might already be suffering from the symptoms associated with the disease and could additionally be infectious to an Anopheles mosquito. These insects act as a vector, subsequently spreading the disease to other humans. In order to cure not only malaria but prevent transmission as well, a drug must target both the blood‐ and pre‐erythrocytic liver stages of the parasite. P. falciparum (Pf) enoyl acyl carrier protein (ACP) reductase (ENR) is a key enzyme of plasmodial type II fatty acid biosynthesis (FAS II). It has been shown to be essential for liver‐stage development of Plasmodium berghei and is therefore qualified as a target for true causal chemoprophylaxis. Using virtual screening based on two crystal structures of PfENR, we identified a structurally novel class of FAS inhibitors. Subsequent chemical optimization yielded two compounds that are effective against multiple stages of the malaria parasite. These two most promising derivatives were found to inhibit blood‐stage parasite growth with IC₅₀ values of 1.7 and 3.0 μM and lead to a more prominent developmental attenuation of liver‐stage parasites than the gold‐standard drug, primaquine.     

Melt processing and characterization of polyvinyl alcohol and polyhydroxyalkanoate multilayer films

Multilayer films for food packaging applications composed of polyvinyl alcohol (PVOH) as the core layer and polyhydroxyalkanoate (PHA) as the outer skin layers were produced by the co‐extrusion process. Rheological properties of PVOH and PHA were performed and analyzed before co‐extruding into a cast film. Analysis of the rheological data indicated the processing temperatures and grades of the PVOH and PHA polymers that would produce similar viscosity and melt flow properties. To improve adhesion of the layers, PHA was grafted with maleic anhydride using a dicumyl peroxide initiator to provide a tie layer material, which improved the peel strength of the PHA and PVOH layers by over 2×. Oxygen transmission rate (OTR) testing showed that the multilayer sample provided an OTR of 27 cc/m²‐day at 0% relative humidity (RH) and rates of 41 and 52 cc/m²‐day at relative humidity values of 60% and 90% RH, respectively. This indicates significant barrier performance enhancement over monolayer PVOH that provided an OTR of 60 cc/m²‐day at 0% RH and 999 cc/m²‐day at 60% RH. Biodegradation testing of the films in the marine environment showed that both the unmodified and maleated PHA polymers displayed high levels of mineralization, whereas the PVOH material did not. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

髋关节整体替代陶瓷材料

许多材料在医学领域应用广泛,例如,整体替换硬组织或软组织的元件(如骨盆、骨头、关节、植牙等)、修补、诊断或矫正仪器(如起搏器、心脏阀等)。这些材料不仅要有好的力学性能,还要保持长期稳定,不能与人体相排斥。由于陶瓷材料在生理环境中具有强度高、生物相容性强和稳定性好的优点,人们研究用陶瓷材料替换骨骼。从20 世纪70 年代起,欧洲人用陶瓷组件置换整个髋关节。这些组件主要由氧化铝和氧化锆单体制成。然而,在有水环境中,氧化锆会发生低温降解。目前人们的研究重点在于提高陶瓷组件的强度和耐磨性,同时缩小其尺寸并延长其使用寿命。研究中使用的材料是氧化锆增韧的氧化铝复合陶瓷和其它氧化铝复合陶瓷,不再是单体陶瓷。另外,还可以使用氧化铝和氧化锆功能梯度复合材料。该梯度材料可以利用电泳沉积法(EPD)制得,其表面为纯氧化铝,中心部分为均匀的氧化铝、氧化锆复合材料,中间过渡部分是呈连续梯度渐变的氧化铝、氧化锆复合材料,烧成后会产生剩余热应力。设计这样的梯度结构是为了使复合材料具有最大表面压应力和最小内部张应力,与纯氧化铝组件相比,提高了强度和耐磨性。     

Influence of montmorillonite layered silicate on plasticized poly(l-lactide) blown films

Plasticized poly(l-lactide) (PLA) montmorillonite layered silicate (MLS) nanocomposites were compounded and blown-film processed using a co-rotating twin screw extruder. PLA was mixed with 10 wt% acetyltriethyl citrate ester plasticizer and 5 wt% of an organically modified montmorillonite at various screw speeds. Wide-angle X-ray diffraction (WAXD) and transmission electron microscopy (TEM) determined that the compounded pellets and the blown film PLA/MLS nanocomposites were intercalated. The effect of processing screw speeds on the barrier, thermal, mechanical, and biodegradation properties of the nanocomposites were analyzed and compared to the neat polymer. Nanocomposite films show a 48% improvement in oxygen barrier and a 50% improvement in water vapor barrier in comparison to the neat PLA. The thermogravimetric analysis (TGA) showed an overall 9 °C increase in the decomposition temperature for all of the nanocomposites. Differential scanning calorimetry (DSC) has determined that the glass transition, cold crystallization and melting point temperatures were not significantly influenced by the presence of MLS. Mechanical properties of the nanocomposites showed that the Young's modulus increased by 20% and the ultimate elongation of the nanocomposites were not sacrificed in comparison to the neat samples. Biodegradation rates in soil were slightly greater for the PLA/MLS nanocomposite than the pure PLA. However, none of the PLA pure and nanocomposites achieved significant biodegradation levels after 180 days.     

Effect of CO2 Exposure on the Chemical Stability and Mechanical Properties of BaZrO3‐Ceramics

The reactivity of BaZrO₃ with CO₂ has been addressed as one of the major challenges with BaZrO₃‐based electrolytes in protonic ceramic fuel cells. Here, we present a study of the effect of CO₂ exposure on BaZrO₃‐materials at elevated temperatures. Dense BaZr_1?xY_xO_3?x/2 (x = 0, 0.05, 0.1, 0.2) and BaCe_0.2Zr_0.7Y_0.1O_2.95 ceramics were prepared by sintering of powder prepared by spray pyrolysis. The Vickers indentation method was used to determine the hardness and estimate the fracture toughness of pristine materials as well as the corresponding materials exposed to CO₂. Formation of BaCO₃ on the surface of exposed ceramics was confirmed by X‐ray diffraction and electron microcopy. The reaction resulted in formation of Ba‐deficient perovskite at the exposed surface. The reaction with CO₂ was most pronounced at 650°C compared to the other temperatures applied in the study. The reactivity was also shown to depend on the Y‐content and the grain size and was most pronounced for BaZr_0.9Y_0.1O_2.95. The reaction with CO₂ was observed to have a profound effect on the fracture toughness of the ceramics, demonstrating a depression of the mechanical stability of the materials. The results are discussed with respect to the chemical and mechanical stability of BaZrO₃ materials, with particular emphasis on the composition and grain size.     

Severity of delayed (“secondary”) cerebral energy failure after acute hypoxia-ischemia is related to the time integral of acute ATP depletion

The aim of this study was to reproduce the delayed (secondary) cerebral energy failure previously described in birth-asphyxiated newborn infants and to investigate relationships between primary insult severity and the extent of the delayed energy failure. Phosphorus (³¹P) magnetic resonance spectroscopy (MRS) at 7 T was used to study the brains of 12 newborn piglets during an acute, reversible, cerebral hypoxic-ischemic episode which continued until nucleotide triphosphates (NTP) were depleted. After reperfusion and reoxygenation, spectroscopy was continued for 48 h. High-energy metabolite concentrations returned to near normal levels after the insult, but later they fell as delayed energy failure developed. The time integral of NTP depletion in the primary insult correlated strongly with the minimum [phosphocreatine (PCr)]/[inorganic orthophosphate (P_i)] observed 24–48 h after the insult. (Linear regression analysis gave slope –8.04 h^–1; ordinate intercept=1.23;r=0.92;P<0.0001.) This model is currently being used to investigate the therapeutic potential of various cerebroprotective strategies including hypothermia.