Nanoparticles of CdCl2 with closed cage structures

Nanoparticles of various layered compounds having a closed cage or nanotubular structure, designated also inorganic fullerene-like (IF) materials, have been reported in the past. In this work IF-CdCl₂ nanoparticles were synthesized by two methods. In one technique, a high temperature evaporation and subsequent condensation of dried cadmium chloride powder was used. In the other method, electron beam irradiation of the source powder led to its recrystallization into closed nanoparticles with a nonhollow core. The two methods are shown to produce nanoparticles of different topologies. While mostly spherical nested structures are obtained from the high temperature process, polyhedra with hexagonal or elongated rectangular characters are obtained by the electron beam induced process. The analysis also shows that, while the source (dried) powder is orthorhombic cadmium chloride monohydrate, the crystallized IF cage consists of the anhydrous 3R polytype which is not stable as bulk material in ambient atmosphere. Consistent with previous observations, this study shows that the seamless structure of the IF materials can stabilize phases, which are otherwise unstable in ambient conditions.     

Temperature influence on the behavior of polysulfone‐b‐poly(alkylene oxide)‐b‐poly(dimethylsiloxane) triblock copolymers in a selective solvent

Triblock copolymers containing polysulfone, poly(alkylene oxide), and poly(dimethylsiloxane) segments were obtained by addition of preformed α,ω‐bis(hydrogensilyl) poly(dimethylsiloxane) oligomers to alyl end‐capped poly(alkylene oxide)‐b‐polysulfone. Viscometric and UV absorption measurements were carried out in dilute 1,2‐dichlorethane solutions, in the temperature range of 20–75°C. The specific interactions exhibited by the block copolymers in a selective solvent are influenced by the copolymer composition and temperature. The results point to a conformational transition phenomenon, located around 55°C, which is attributed to the transition from a segregated to a pseudo‐Gaussian conformation through a compressed‐segregated conformation. POLYM. ENG. SCI., 57:114–118, 2017. © 2016 Society of Plastics Engineers     

Optimal design,dynamics and control of a reactive DWC for biodiesel production

Reactive separation technologies were proposed recently for fatty acid methyl esters (FAME) production, providing significant benefits such as minimal capital and operating cost savings. One approach is to use a reactive dividing-wall column (R-DWC) for the biodiesel production process. However, since the R-DWC is designed for a quaternary reactive system – two reactants (one in excess) and two products – more difficulties concerning the process control may be expected considering the high degree of integration of the process.     

Aqueous two‐phase systems for the recovery of a recombinant viral coat protein from Escherichia coli

In this study the use of an aqueous two‐phase system (ATPS) following the direct chemical extraction of a recombinant viral coat protein, from the cytoplasm of Escherichia coli, is evaluated. The driving force is the need to establish an economically‐viable process for the manufacture of a vaccine against human papilloma infection. The partition behaviour of recombinant L1 protein, the major structural protein of the virus, and DNA was investigated in a polyethylene glycol (PEG)–phosphate system. An evaluation of system parameters including PEG molecular mass and the concentrations of PEG and phosphate was conducted, to estimate conditions under which the L1 protein and DNA partition to opposite phases. ATPS extraction comprising a volume ratio of 1.00, PEG 1000 (18.0%(w/w)) and phosphate (15.0%(w/w)) provided the conditions for accumulation of DNA into the bottom phase and concentration of L1 protein into the opposite phase (ie partition coefficient of DNA; ln K_DNA < 0.0 and partition coefficient of L1; ln K_L1 > 2.5). The findings reported here demonstrate the potential of ATPS to recover recombinant protein released from E coli by direct chemical extraction. © 2002 Society of Chemical Industry     

Ternary Gels of a Polymer Blend and a Recycled Oil: Their Use as Bitumen Modifiers

A blend of random ethylene‐vinyl acetate copolymer (EVA) and triblock styrene‐butadiene‐styrene copolymer (SBS) was dissolved in a recycled engine oil to obtain ternary thermoreversible gels. As the temperature was increased, first a network associated with EVA disappeared, and a second one associated with SBS dominated, maintaining the elastic response of the system. The principal advantage of these ternary systems is that their mechanical properties and thermal stability are better than that of binary gels. These gels, made from waste, can be used as bitumen modifiers to obtain binders of improved properties and good stability, which are useful for road surfacing.

Temperature sweeps of elastic modulus performed at a frequency of 1 Hz.     

Ozonation of Two Acidic Azo Dyes with Different Substituents

The ozonation of two differently substituted azo dyes (Schwarz GRS and Orange Acid 8) in water media is studied. The influence of pH on the effectiveness of the ozonation at various initial concentrations of each dye is explored. It was found out that the rates of decolorization for amino-group substituted dyes reflect the considerable influence by the widely varying initial pH from 4.5 to 10. Specifically, the highest effect of decolorization of this dye was obtained at the highest pH studied (pH 10) for all initial concentrations of the solutions. Considering the dye without an amino-group substitute, the rates of color disappearance in ozonation reflected to a lower degree the variations of the initial pH. Pseudo-first-order trends of decolorization were observed in all the experimental runs. Regarding the kinetic results obtained, an attempt to explain the different dyes reactivity was made based on the absolute electronegativity (E_lumo + E_homo) of both dyes. The COD/BOD analysis shows that the ozonation of both azo dyes can reduce the sample COD but it could not improve the biodegradability ratio (BOD₅/COD). BOD decrease with ozonation time indicates that the intermediates of the ozonation are of lower biodegradability. Oxalic acid was found as the final product of ozonation of both dyes.     

MACE – An Open Access Data Repository of Mass Spectra for Chemical Ecology

Journal of Chemical Ecology - MACE is an open access collection of electron impact (EI) mass spectra for coupled gas chromatography-mass spectrometry (GC/MS) that serves as an add-on database,...     

Operating limits and features of direct air capture on K2CO3/ZrO2 composite sorbent

Potassium carbonate-based sorbents are prospective materials for direct air capture (DAC). In the present study, we examined and revealed the influence of the temperature swing adsorption (TSA) cycle conditions on the CO₂ sorption properties of a novel aerogel-based K₂CO₃/ZrO₂ sorbent in a DAC process. It was shown that the humidity and temperature drastically affect the sorption dynamic and sorption capacity of the sorbent. When a temperature at the sorption stage was 29 ℃ and a water vapor pressure in the feed air was 5.2 mbar (1 bar = 10⁵ Pa), the composite material demonstrated a stable CO₂ sorption capacity of 3.4% (mass). An increase in sorption temperature leads to a continuous decrease in the CO₂ absorption capacity reaching a value of 0.7% (mass) at T = 80 ℃. The material showed the retention of a stable CO₂ sorption capacity for many cycles at each temperature in the range. Increasing P_H2O in the inlet air from 5.2 to 6.8 mbar leads to instability of CO₂ sorption capacity which decreases in the course of 3 consecutive TSA cycles from 1.7% to 0.8% (mass) at T = 29 ℃. A further increase in air humidity only facilitates the deterioration of the CO₂ sorption capacity of the material. A possible explanation for this phenomenon could be the filling of the porous system of the sorbent with solid reaction products and an aqueous solution of potassium salts, which leads to a significant slowdown in the CO₂ diffusion in the composite sorbent grain. To investigate the regeneration step of the TSA cycle in situ, the macro ATR-FTIR (attenuated total reflection Fourier-transform infrared) spectroscopic imaging was applied for the first time. It was shown that the migration of carbonate-containing species over the surface of sorbent occurs during the thermal regeneration stage of the TSA cycle. The movement of the active component in the porous matrix of the sorbent can affect the sorption characteristics of the composite material. The revealed features make it possible to formulate the requirements and limitations that need to be taken into account for the practical implementation of the DAC process using the K₂CO₃/ZrO₂ composite sorbent.     

The Non-Erythropoietic EPO Analogue Cibinetide Inhibits Osteoclastogenesis In Vitro and Increases Bone Mineral Density in Mice

The two erythropoietin (EPO) receptor forms mediate different cellular responses to erythropoietin. While hematopoiesis is mediated via the homodimeric EPO receptor (EPOR), tissue protection is conferred via a heteromer composed of EPOR and CD131. In the skeletal system, EPO stimulates osteoclast precursors and induces bone loss. However, the underlying molecular mechanisms are still elusive. Here, we evaluated the role of the heteromeric complex in bone metabolism in vivo and in vitro by using Cibinetide (CIB), a non-erythropoietic EPO analogue that exclusively binds the heteromeric receptor. CIB is administered either alone or in combination with EPO. One month of CIB treatment significantly increased the cortical (~5.8%) and trabecular (~5.2%) bone mineral density in C57BL/6J WT female mice. Similarly, administration of CIB for five consecutive days to female mice that concurrently received EPO on days one and four, reduced the number of osteoclast progenitors, defined by flow cytometry as Lin⁻CD11b⁻Ly6C^hi CD115⁺, by 42.8% compared to treatment with EPO alone. In addition, CIB alone or in combination with EPO inhibited osteoclastogenesis in vitro. Our findings introduce CIB either as a stand-alone treatment, or in combination with EPO, as an appealing candidate for the treatment of the bone loss that accompanies EPO treatment.     

The Natural Course of Non-Alcoholic Fatty Liver Disease

Non-alcoholic fatty liver disease (NAFLD) is the most prevalent form of chronic liver disease in the world, paralleling the epidemic of obesity and Type 2 diabetes mellitus (T2DM). NAFLD exhibits a histological spectrum, ranging from “bland steatosis” to the more aggressive necro-inflammatory form, non-alcoholic steatohepatitis (NASH) which may accumulate fibrosis to result in cirrhosis. Emerging data suggests fibrosis, rather than NASH per se, to be the most important histological predictor of liver and non-liver related death. Nevertheless, only a small proportion of individuals develop cirrhosis, however the large proportion of the population affected by NAFLD has led to predictions that NAFLD will become a leading cause of end stage liver disease, hepatocellular carcinoma (HCC), and indication for liver transplantation. HCC may arise in non-cirrhotic liver in the setting of NAFLD and is associated with the presence of the metabolic syndrome (MetS) and male gender. The MetS and its components also play a key role in the histological progression of NAFLD, however other genetic and environmental factors may also influence the natural history. The importance of NAFLD in terms of overall survival extends beyond the liver where cardiovascular disease and malignancy represents additional important causes of death.