Thermal properties of tapioca starch

Thermal properties of native tapioca starch, including thermal conductivity, specific heat, and thermal diffusivity at 4, 15, and 30% moisture contents, and 25, 50, and 75°C temperature levels were studied. Thermal conductivity was measured using a line‐heat source thermal probe equipped with a computerized data acquisition system; specific heat was measured using Differential Scanning Calorimetry (DSC) and thermal diffusivity was calculated from the thermal conductivity, density, and specific heat. Thermal conductivity, specific heat, and thermal diffusivity increased with the increase of temperature and/or moisture content. Prediction models for the thermal properties of tapioca starch were developed for practical applications.     

Antioxidant properties of various solvent extracts of potato peel,sugar beet pulp and sesame cake

BACKGROUND: Growing interest in the replacement of synthetic food antioxidants by natural ones has fostered research on vegetable sources and screening of raw materials to identify new antioxidants. The food‐processing industry generates substantial quantities of phenolic‐rich by‐products that could be valuable natural sources of antioxidants. In this study the antioxidant properties and total phenolic, flavonoid and flavonol contents of three industrial by‐products, sugar beet pulp, sesame cake and potato peel, extracted with various solvents were examined. Since different antioxidant compounds have different mechanisms of action, several methods were used to assess the antioxidant efficacy of extracts. RESULTS: Among the six solvents tested, methanol gave the highest extract yield of potato peel and sugar beet pulp, while diethyl ether gave the highest extract yield of sesame cake. Methanol exhibited the highest extraction ability for phenolic compounds, with total phenolics amounting to 2.91, 1.79 and 0.81 mg gallic acid equivalent g^?1 dry weight in potato peel, sugar beet pulp and sesame cake extracts respectively, and also showed the strongest antioxidant capacity in the three assays used. All three methods proved that potato peel extract had the highest antioxidant activity owing to its high content of phenolic compounds and flavonoids. CONCLUSION: On the basis of the results obtained, potato peel, sugar beet pulp and sesame cake extracts could serve as natural antioxidants owing to their significant antioxidant activity. Therefore they could be used as preservative ingredients in the food and/or pharmaceutical industries. Copyright © 2009 Society of Chemical Industry     

Chitosan/clay nanocomposite film preparation and characterization

Nanocomposites of chitosan and nanoclays (MMT‐Na⁺ and Cloisite 30B) were prepared by solvent casting. The structural properties, thermal behaviors, and mechanical properties were characterized using X‐ray diffraction (XRD), transmission electron microscopy (TEM), atomic force microscopy, differential scanning calorimetry, thermogravimetry analyses, and an Instron universal testing machine. XRD and TEM results indicated that an exfoliated structure was formed with addition of small amounts of MMT‐Na⁺ to the chitosan matrix. Intercalation along with some exfoliation occurred with up to 5 wt % MMT‐Na⁺. Micro‐scale composite (tactoids) formed when Cloisite 30B was added to the chitosan matrix. Surface roughness increased with addition of a small amount of clay. Tensile strength of a chitosan film was enhanced and elongation‐at‐break decreased with addition of clay into the chitosan matrix. Melt behavior and thermal stability did not change significantly with addition of clays. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1684–1691, 2006     

Säurekatalysierte Umsetzungen von Aromaten mit Alkanen und Cycloalkanen. IX. Alkylierungen mit 2,2,4-Trimethylpentan (Isooctan)

Acid-catalyzed Reactions of Aromatic Hydrocarbons with Alkanes and Cycloalkanes. IX. Alkylations with 2,2,4-Trimethylpentane (Isooctane) The non-conventional alkylation of benzene, toluene, ethyl- and isopropylbenzene, fluoro- and chlorobenzene with 2,2,4-trimethylpentane in the presence of acid catalysts is described. The composition of the rather complex reaction mixtures is determined by gas-liquid chromatography and mass spectrometry, tert. butylarenes being the main products beside alkylsubstituted indanes and tetralines. Their formation is interpreted as a competition between fragmentation and isomerization of the alkylating agent. By use of trifluoromethanesulfonic acid or combinations of catalysts from HF or HSO₃F with variant metallic fluorides at lower temperatures the selectivity of the reaction may be partially raised.     

Impact compaction on a subgrade layer overlying deep deposit

Recent expansions of urban communities around the world have forced geotechnical engineers to deal with weak deep deposit for the construction of highways and roads. The current practice in estimating the level of field compaction is based on the results of a laboratory test, known as ‘Proctor’, where wide discrepancies are found between the laboratory-predicted and the field measurements. Impact compaction is a widespread soil-improvement technique that has been used with proven effectiveness. The technique is environmentally friendly, simple to apply and relatively inexpensive. This study presents a numerical model, which was developed to simulate the case of a dry thin subgrade layer overlying a deep deposit and subjected to impact compaction. The model is capable of measuring the total energy applied to the surface of the subgrade layer and its two components; namely the portion dissipated into the lower deposit and the portion remaining in the subgrade layer causing its compaction. A design guideline is presented.     

EPR studies of (Bi, Pb)-2223 phase substituted by Ruthenium ions

This work studied X-ray powder diffraction (XRD), electrical resistivity and electron paramagnetic resonance (EPR) measurements for Bi_1.8Pb_0.4Sr₂Ca_2.1Cu_3−xRu_xO_10+δ (0.0 ≤ x ≤ 0.4) superconducting samples. XRD analysis and electrical resistivity data showed that the low-content of Ru, x ≤ 0.05, enhanced both the phase formation and the superconducting transition temperature of (Bi, Pb)-2223 phase. A phase change from (Bi, Pb)-2223 phase to (Bi, Pb)-2212 phase was reported for x ≥ 0.15. Two EPR lines were observed for 0.0 ≤ x ≤ 0.075, indicating the presence of both (Bi, Pb)-2223 and (Bi, Pb)-2212 phases. While, one EPR line was observed for x ≥ 0.15, corresponding to the (Bi, Pb)-2212 phase formation. The number of spins (N) participating in the resonance and its spin paramagnetic susceptibility (χ), for the two phases, were calculated as a function of both Ru-content and temperature. In addition, we reported the variation of activation energy (E_a), Curie constant (C), Curie temperature (θ) and effective magnetic moment (μ) with Ru-content.     

Effects of pigmentation on siloxane–polyurethane coatings and their performance as fouling-release marine coatings

Siloxane–polyurethane paints were formulated and characterized for coating properties and performance as fouling-release (FR) marine coatings. Paints were formulated at 20 and 30 pigment volume concentrations with titanium dioxide, and aminopropyl-terminated poly(dimethylsiloxane) (APT-PDMS) loadings were varied from 0 to 30% based on binder mass. The coatings were characterized for water contact angle, surface energy (SE), gloss, and pseudobarnacle (PB) adhesion. The assessment of the FR performance compared with polyurethane (PU) and silicone standards through the use of laboratory biological assays was also performed. Biofilm retention and adhesion were conducted with the marine bacterium Cellulophaga lytica, and the microalgae diatom Navicula incerta. Live adult barnacle reattachment using Amphibalanus amphitrite was also performed. The pigmented coatings were found to have properties and FR performance similar to those prepared without pigment. However, a higher loading of PDMS was required, in some cases, to obtain the same properties as coatings prepared without pigment. These coatings rely on a self-stratification mechanism to bring the PDMS to the coating surface. The slight reduction in water contact angle (WCA) and increase in pseudobarnacle release force with pigmentation suggests that pigmentation slowed or interfered with the self-stratification mechanism. However, increasing the PDMS loading is an apparent method for overcoming this issue, allowing for coatings having similar properties as those of clear coatings and FR performance similar to those of silicone standard coatings.     

Antioxidant Effects of Berry Phenolics Incorporated in Oil-in-Water Emulsions with Continuous Phase β-Lactoglobulin

The purpose of this study was to evaluate the effects of berry phenolics, in this case, black currant (Ribes nigrum) anthocyanins and raspberry (Rubus idaeus) ellagitannins, in the presence of continuous phase β-lactoglobulin (β-Lg), on the oxidative stability of Brij 35-stabilized corn oil-in-water emulsions. The extent of lipid oxidation in emulsions was measured by determining the formation of lipid hydroperoxides and hexanal, and extent of protein oxidation by monitoring the loss of tryptophan and cysteine residues in the continuous phase β-Lg. Berry phenolics at concentration levels of 20 and 50 μM were able to prevent lipid oxidation with and without β-Lg in the aqueous phase. The results show that a combination of β-Lg and berry phenolics was more efficient in inhibiting hexanal formation than either component alone. Synergistic effects on antioxidant activity toward hexanal were observed only at the 20 μM levels of berry phenolics in combination with continuous phase β-Lg. The berry phenolics were also able to inhibit the oxidation of tryptophan and cysteine residues of β-Lg. The results show that the amino acid residues were oxidized prior to the propagation of lipid oxidation. This suggests that these amino acids were able to inhibit fatty acid scission. The information gained from this study would be useful in protecting emulsion-based food products from oxidative deterioration.     

Current Operational Amplifier (COA): CMOS Realization and Active Compensation

A methodology for analysis and synthesis of lowpass sigma-delta () converters is presented in this paper. This method permits the synthesis of modulators employing continuous-time filters from discrete-time topologies. The analysis method is based on the discretization of a continuous-time model and using a discrete simulator, which is more efficient than an analog simulator. In our analysis approach, the influence of the sample and hold block and non-idealities of the feedback DAC can be systematically modeled by discrete-time systems. Finally, a realistic design of a second-order modulator with a compensation of the non-ideal behavior of the DAC is given. Moreover, simulation results show a good agreement with the theoretical predictions.