Synthesis and photopolymerization of novel,highly reactive phosphonated-urea-methacrylates for dental materials

An urea methacrylate (1) and two phosphonated methacrylates (2–3) were synthesized from 2-isocyanatoethyl methacrylate (IEM) and benzyl amine (1), diethyl aminomethylphosphonate (2) and diethyl amino(phenyl)methylphosphonate (3). Their photopolymerization rates are notably higher than commercial monomers, despite the presence of only one double bond. Their polymerization rates follow the order 1 ～ 2 > 3 ～ triethylene glycol dimethacrylate (TEGDMA) > 2-hydroxyethyl methacrylate (HEMA). A tendency toward high crosslinking density during thermal bulk polymerizations, low oxygen sensitivity and high conversions with benzophenone during photopolymerization indicated the importance of hydrogen abstraction/chain transfer reactions. It was found that the addition of the monomers to HEMA significantly increased its polymerization rate, proving their utility as replacements for TEGDMA as reactive diluents for 2,2-bis[4-(2-hydroxy-3-methacryloyloxy propyloxy) phenyl] propane (Bis-GMA). Copolymer systems containing 2 and 3 showed improved T_g values compared to Bis-GMA/TEGDMA systems.     

Electrospun fiber membranes from blends of poly(vinylidene fluoride) with fouling‐resistant zwitterionic copolymers

Nonwoven super‐hydrophobic fiber membranes have potential applications in oil–water separation and membrane distillation, but fouling negatively impacts both applications. Membranes were prepared from blends comprising poly(vinylidene fluoride) (PVDF) and random zwitterionic copolymers of poly(methyl methacrylate) (PMMA) with sulfobetaine methacrylate (SBMA) or with sulfobetaine‐2‐vinylpyridine (SB2VP). PVDF imparts mechanical strength to the membrane, while the copolymers enhance fouling resistance. Blend composition was varied by controlling the PVDF‐to‐copolymer ratio. Nonwoven fiber membranes were obtained by electrospinning solutions of PVDF and the copolymers in a mixed solvent of N,N‐dimethylacetamide and acetone. The PVDF crystal phases and crystallinities of the blends were studied using wide‐angle X‐ray diffraction and differential scanning calorimetry (DSC). PVDF crystallized preferentially into its polar β‐phase, though its degree of crystallinity was reduced with increased addition of the random copolymers. Thermogravimetry (TG) showed that the degradation temperatures varied systematically with blend composition. PVDF blends with either copolymer showed significant increase of fouling resistance. Membranes prepared from blends containing 10% P(MMA‐ran‐SB2VP) had the highest fouling resistance, with a fivefold decrease in protein adsorption on the surface, compared to homopolymer PVDF. They also exhibited higher pure water flux, and better oil removal in oil–water separation experiments. © 2018 Society of Chemical Industry     

Development and characterization of poly(vinyl alcohol) and casein blend films

Blends of plasticized casein (CA) and poly(vinyl alcohol) (PVA) at various ratios were prepared using the solution‐casting method. The prepared blend solutions were cast onto polystyrene petri plates and bend films were obtained. The characterization of films was performed using Fourier transform infrared spectroscopy, tensile testing, thermogravimetric analysis, contact angle measurements and water vapour permeability. According to spectroscopic analysis, there were interactions between the CA and PVA molecules. The tensile test results showed that the tensile strength of CA increased with increasing PVA content. The flexibility of plasticized CA film increased with the incorporation of PVA. The thermal stability and water vapour barrier properties of plasticized CA improved on blending with PVA. As a result, it was seen that blend films were successfully produced using plasticized CA and PVA with potential for use in biodegradable packaging applications. © 2019 Society of Chemical Industry     

Some structural properties of CdO:F films produced by ultrasonic spray pyrolysis method

The fluorine doped cadmium oxide (CdO:F) samples have been deposited at 250 °C by ultrasonic spray pyrolysis method. Cadmiumacetat-dihydrat and ammonium fluoride have been taken as a source of cadmium and fluorine-dopant respectively. The thickness of the CdO:F samples was about 1.4 μm. X-ray diffraction pattern of the CdO:F samples has revealed that the samples are polycrystalline with cubic sodium chloride structure. There are shifts of the d values (interplanar spacing) for CdO:F samples with respect to standard CdO film. The lattice parameters for cubic structure have been calculated using the Bragg equation. The texture coefficients calculated for various planes at different fluorine concentrations indicate that the samples have exhibited (111) and (200) preferential orientations.     

Determination of important biochemical properties of honey to discriminate pure and adulterated honey with sucrose (Saccharum officinarum L.) syrup

The aims of the present study were to determine biochemical properties of honey samples and to discriminate pure and adulterated honey produced by the standard bee feeding method (control honey), the shaking method (pure blossom honey), and overfeeding (100 kg/colony syrup) with sucrose syrup (adulterated honey). The biochemical properties evaluated were moisture, ash, acidity, hydroxymethylfurfural (HMF), specific sugars (i.e. fructose, glucose, fructose–glucose, sucrose, and maltose), diastase activity, δ¹³C value (honey), δ¹³C value (protein), electrical conductivity, potassium, vitamin C, and proline. Fifteen honey samples were analyzed by discriminant analysis stepwise method. Proline, electrical conductivity and sucrose were found as discriminative characters of samples. Based on these three properties 100% of original group cases (samples) correctly classified in their real group. We found that the honey produced by feeding with 100 kg sucrose syrup per colony contained the sucrose as low as pure blossom honey. Therefore, the sugar (sucrose, fructose and glucose) content of honey cannot be used to distinguish between adulterated (sucrose syrup) and pure blossom honey.     

Minimizing the surface effect of PDMS–glass microchip on polymerase chain reaction by dynamic polymer passivation

Polydimethyl siloxane (PDMS)–glass microchip has a very strong surface effect on polymerase chain reaction (PCR), leading to a very poor PCR yield. In the work reported here, practical dynamic passivation of surfaces of PDMS–glass microchip using polyethylene glycol (PEG) or polyvinylpyrrolidone (PVP) was achieved using a conventional thermocycler. The passivation procedure was cost‐effective and easy to conduct. The effects of polymer molecular weight and polymer concentration on tube PCR efficiency were investigated primarily to prescreen out suitable polymers and polymer concentrations in the PCR mixture. The result from tube PCR indicated that both PEG and PVP could affect the performance of Taq polymerase. A final concentration of 0.025% (w/v) or 0.4% (w/v) polymer in the PCR mixture can enhance the tube PCR, while 1% (w/v) polymer was found to inhibit the reaction. PEG was more effective in tube PCR, although PVP performed better in chip PCR. Instead of employing the polymer directly in the PCR mixture, i.e. the conventional in situ passivation approach, another approach of dynamic passivation by pre‐injecting polymers into the microchip achieved better performance. The efficiency of pre‐passivation was found to follow the order: PVP10000>PVP55000, PEG8000> PEG10000>PEG400. After pre‐passivation with PVP10000, PVP55000 and PEG8000, the PCR efficiency can recover to 93%, 86% and 83%, respectively, of that obtained from tube PCR. Copyright © 2006 Society of Chemical Industry     

Synthesis and polymerizations of novel bisphosphonate‐containing methacrylates derived from alkyl α‐hydroxymethacrylates

The synthesis and polymerizations of four novel bisphosphonate‐containing monomers are reported. The monomers were synthesized from reaction of ethyl and tert‐butyl α‐bromomethacrylates with 3,3‐bis(diethoxyphosphoryl)propanoic acid or with tetraethyl 4‐hydroxybutane‐1,1‐diyldiphosphonate. Their thermal bulk polymerizations, photopolymerizations and copolymerizations with poly(ethylene glycol) methyl ether methacrylate were investigated. The homopolymerizations resulted in polymers with values of 25 000–83 000 g mol^?1; the copolymerizations yielded soluble polymers with 22–34% incorporation of the new monomers; the photopolymerizations gave some structure–reactivity correlation; and one of the homopolymers, upon hydrolysis of its bisphosphonate groups, could interact with hydroxyapatite. © 2013 Society of Chemical Industry     

An industry experiment on the effects of test-driven development on external quality and productivity

Existing empirical studies on test-driven development (TDD) report different conclusions about its effects on quality and productivity. Very few of those studies are experiments conducted with software professionals in industry. We aim to analyse the effects of TDD on the external quality of the work done and the productivity of developers in an industrial setting. We conducted an experiment with 24 professionals from three different sites of a software organization. We chose a repeated-measures design, and asked subjects to implement TDD and incremental test last development (ITLD) in two simple tasks and a realistic application close to real-life complexity. To analyse our findings, we applied a repeated-measures general linear model procedure and a linear mixed effects procedure. We did not observe a statistical difference between the quality of the work done by subjects in both treatments. We observed that the subjects are more productive when they implement TDD on a simple task compared to ITLD, but the productivity drops significantly when applying TDD to a complex brownfield task. So, the task complexity significantly obscured the effect of TDD. Further evidence is necessary to conclude whether TDD is better or worse than ITLD in terms of external quality and productivity in an industrial setting. We found that experimental factors such as selection of tasks could dominate the findings in TDD studies.     

Non-Newtonian laminar pulsating heat and fluid flow in plane duct

In the present study, laminar pulsating power-law momentum and heat transfer in a uniformly heated plane duct is studied analytically. Assuming that fully developed conditions exist both hydrodynamically and thermally, a perturbation series method is utilized to derive analytical solutions for the momentum and energy balance equations, and the amplitude is prescribed as the perturbation parameter. For varying values of the power-law index ( $n$), representing pseudoplastic, Newtonian, and dilatant fluids, effects of dimensionless amplitude ( $ϵ$) and frequency ( $F$) on periodic and period-averaged friction factor and Nusselt number are obtained. The results obtained for Newtonian fluid are shown to be in good harmony with the corresponding findings in the open literature.