All-optical wavelength conversion by semiconductor opticalamplifiers

Following a brief introduction to the applications for wavelength conversion and the different available conversion techniques, the paper gives an in depth analysis of cross gain and cross phase wavelength conversion in semiconductor optical amplifiers. The influence of saturation filtering on the bandwidth of the converters is explained and conditions for conversion at 20 Gb/s or more are identified. The cross gain modulation scheme shows extinction ratio degradation for conversion to longer wavelengths. This can be overcome using cross phase modulation in semiconductor optical amplifiers that are integrated into interferometric structures. The first results for monolithic integrated interferometric wavelength converters are reviewed, and the quality of the converted signals is demonstrated by transmission of 10 Gb/s converted signals over 60 km of nondispersion shifted single mode fiber     

Safety of intrauterine contraceptive devices during MR imaging

OBJECTIVE: We report a case of candidiasis of the upper urinary tract that presented as acute renal failure associated with septic syndrome. The patient initially required hemodialysis. Right hydronephrosis and perirenal collection were observed on ultrasound examination. METHODS: A percutaneous nephrostomy was performed. Nephrostomy urine cytology and cultures were positive for Candida tropicalis. An anterograde pyelography showed a 'fungus ball' in the urinary tract. RESULTS: Therapy with oral fluconazole and percutaneous amphotericin B achieved excellent results. CONCLUSIONS: Candidiasic urinary infection of the upper urinary tract often produces obstructive uropathy requiring percutaneous nephrostomy, which can also be used to instill amphotericin B. Combination therapy with amphotericin B and fluconazole can achieve excellent results.     

Designing for parallel fuzzy computing

As the number of fuzzy logic applications increases, demand for faster architectures will grow. Our design for a VLSI fuzzy processor uses fuzzy inference techniques that optimize processing time. Preprocessing that reduces the number of rules to be processed, parallel computation of active rule degrees of activation, and scalability are major features of this architecture. The journal issue contains a concise summary of this article. The complete article is linked to Micro's home page on the World Wide Web (http://www.computer.org/pubs/micro/micro.htm)     

Application of Rachinger''s method to separate overlapped doublets in the X-ray photoelectron spectrum

Rachinger's method of separating ₁ and ₂ doublets in X-ray emission spectra is applied for the first time to separate the superimposed doublets due to spin-orbit coupling. This method has been applied to separate closely lying doublets such as (Ag 4p_3/2and Ag 4p_1/2, (Ni 3p_3/2and Ni 3p_1/2) and (Cu 3p_3/2and Cu 3p_1/2). The intensities ratios of the separated peaks are measured and compared with the ratios obtained from a first-order calculation. An excellent agreement between the measured and calculated ratios are obtained. Residual background intensities compared with the estimated values are found to agree within certain uncertainties.     

RBS/channelling study of ion-implanted and proton-exchanged LiNbO3:Nd:MgO planar waveguides

We present a structural study of two Nd³⁺/MgO codoped LiNbO₃ waveguides fabricated by two different methods: ion-implantation and proton-exchange. Rutherford backscattering spectrometry in combination with channelling was used to study the influence of the waveguide fabrication method on the possible modification of the LiNbO₃ crystal structure within the waveguiding layer. The results show that the ion-implanted waveguide mainly maintains the same properties as the virgin crystal, apart from a deterioration of a thin surface layer, whilst the proton-exchanged waveguide exhibits a quite different behaviour, although its surface is less damaged.     

A computational model for analysing interactive buckling and delamination growth in composite structures

In this paper, a unified method is presented: (i) to model delaminated stiffened laminated composite shells; (ii) for synthesising accurate multiple post-buckling solution paths under compressive loading; and (iii) for predicting delamination growth. A multi-domain modelling technique is used for modelling the delaminated stiffened shell structures. Error-free geometrically nonlinear element formulations — a 2-noded curved stiffener element (BEAM2) and a 3-noded shell element (SHELL3) — are used for the finite element analysis. An accurate and simple automated solution strategy based on Newton type iterations is used for predicting the general geometrically nonlinear and postbuckling behaviour of structures. A simple method derived from the 3-dimensionalJ-integral is used for computing the pointwise energy release rate at the delamination front in the plate/shell models. Finally, the influence of post-buckling structural behaviour and the delamination growth on each other has been demonstrated.     

Discussion of “an interpretation of the carbon redistribution process during aging of high-carbon martensite”

Y. OHMORI and I. TAMURA:Metall. Trans. A, 1992, vol. 23A,     

A FT-IR assessment of iso-C4H8 reactivity with V2O5/TiO2 catalysts

Low-loaded vanadia-titania catalysts have been prepared by impregnation of titania P-25 (Degussa). The catalysts were characterized by X-ray diffraction, specific surface area and porosity assessment by nitrogen adsorption at 77 K. For very low vanadia contents the absence of surface acid Brønsted sites leads to dimerization on surface acid Lewis sites, whereas the presence of surface acid Bransted sites when the vanadia content is increased leads to oxidation to carbonyl and carboxylate species.