Calcification of subcutaneously implanted collagens in relation to cytotoxicity,cellular interactions and crosslinking

In general, calcification of biomaterials occurs through an interaction of host and implanted material factors, but up to now the real origin of pathologic calcification is unknown. In this study we aimed to investigate incidence of calcification of (crosslinked) dermal sheep collagens (DSCs) with respect to their specific properties, during subcutaneous implantation in rats. Three types of DSCs were commercially obtained: non-crosslinked DSC (NDSC), and DSC crosslinked with glutaraldehyde (GDSC) and hexamethylenediisocyanate (HDSC). NDSC, HDSC and GDSC were (enzymatically) tissue culture pretreated to eliminate their cytotoxic products. Beside this, crosslinking methods were modified to optimize mechanical properties and to decrease cytotoxicity, which resulted in HDSC^* and GDSC^*. Furthermore, DSC was crosslinked by activation of the carboxylic groups, i.e. by means of acyl azide and carbodiimide, resulting in AaDSC and CDSC, respectively. After implantation of HDSCs and GDSCs a relation between cytotoxicity and calcification of crosslinked DSC could be made. No relation was found between cellular infiltration of DSCs and calcification. However, from the use of different types and modification of crosslinking methods it might be concluded that calcification is mainly related to stable crosslinks, i.e. to the chemical properties of the obtained material.     

Oversampled Gabor representation for transient signals

Considers the Gabor representation that uses a one-sided exponential window for detection and analysis of transient signals. Earlier results on the critically sampled case are extended to the more practically useful oversampled case. For oversampling by an integer factor, the authors derive an explicit analytical expression for the dual window (dual frame) function required for computing the Gabor representation. Based on this expression they develop an efficient procedure for computing the Gabor coefficients. Finally, they demonstrate the performance of the method by numerical examples     

Structure and dynamics of suspensions of silica particles in liquidcrystals under a low frequency AC applied voltage

Silica particles dispersed in liquid crystals exhibit a novel behavior such as a unique migrating behavior and alignment. These characteristics are found to depend on the size of the nanoparticles, the surface state of nanoparticles, the liquid crystal (LC) phases, the amplitude and the frequency of applied voltage. These are discussed in terms of anisotropic particle-particle and particle-LC molecules interactions in the anisotropic environment of liquid crystal matrix     

Analysis and observation of backscatter-induced crosstalk in a 2-DFDM fiber gyro system

The modulation characteristics of first-order backscatter-induced crosstalk noise in a 2-D frequency-division-multiplexed fiber gyro system are analyzed and experimental results presented. The noise can be reduced from 5°/h to 0.2°/h (0.25 NEB) by proper choice of modulation depth and/or frequency     

Complete corrosion inhibition of lamellar zinc pigment in aqueous alkaline media

Lamellar zinc pigment reacts in aqueous alkaline media (e.g., water-borne paints) with the evolution of hydrogen. This corrosion reaction can be inhibited by 2-nitrophenol (2-NP), 2,4-dinitrophenol (2,4-DNP), 2-hydroxy-3,5-dinitro-benzoic acid (HDNBA) and 2-hydroxy-3-nitro-benzoic acid (2-H-3-NBA) which all have a nitro-group ortho to a hydroxy-group; this structural part of the inhibitors can be considered as a potential chelating group which may explain the corrosion inhibiting effect. As a rule, with triethylamine (TEA) as neutralizing agent corrosion inhibition is slightly better when compared to dimethylethanolamine (DMEA). With TEA there is complete corrosion inhibition with addition of 2,4-DNP at pH 8 and 10; with 2-H-3-NBA there is complete inhibition at pH 10.     

A histological study on polyactive® for the prevention of peridural adhesions after spinal surgery: an experimental study in dogs with a 3 months follow-up

In the present study the potential of Polyactive^® bilayer sheets in the prevention of scar tissue formation after spinal surgery was investigated. Eight adult beagle dogs underwent 3 laminectomies at three levels (L2, L4 and L6). According to a randomized implantation schedule a Polyactive^® sheet or autogenous fat graft was placed in the defect. The third site served as a control without implant. After 4 or 12 weeks (4 dogs per period) the dogs were sacrificed and histological sections were prepared. The Polyactive^® treated defects showed partial closure by newly formed bone. The Polyactive^® was encapsuled by a thin fibrous tissue layer. Ventral to the defect, dense fibrous tissue was present which was separated from the dura by the Polyactive^® sheet in all cases. In some cases fibrous tissue was present between the implant capsule and the dura. In the fat graft group there were no signs of closure of the defect but most sites showed fibrous tissue at the edges of the graft, which was in 4 sites continous with the dura mater. Fibrosis and degeneration of the fat grafts were seen. All control defects showed partial closure by newly formed bone, and ventral to the defect extensive fibrous tissue, which was in 50% continous with the dura mater. Other sections showed loose connective tissue in contact with the dura mater. It is concluded that Polyactive^® has a potential as a mechanical barrier in the prevention of adhesions between the dorsal spinal muscles and the dura mater.     

A 10 Gbit/s OEIC photoreceiver using InP/InGaAs heterojunction bipolar transistors

Metal organic molecular beam epitaxy (MOMBE) was successfully used for the first time to realise a high speed monolithic photoreceiver. Incorporating an InGaAs pin photodetector followed by a transimpedance preamplifier circuit implemented with InP/InGaAs heterojunction bipolar transistors (HBTs), the OEIC photoreceiver had a bandwidth of 6 GHz and a midband transimpedance of 350 Omega . In a system experiment performed at 10 Gbit/s, the receiver exhibited a sensitivity of -15.5 dBm for a bit error rate of 10/sup -9/ at a wavelength of 1.53 mu m. This is the first demonstration of operation of a long wavelength OEIC photoreceiver at this speed.<>     

Sialons — Promising Refractory and Ceramic Materials

Available data on the chemical composition and structure of sialon phases are reviewed. Properties of the phases and their potential applications are discussed.     

Dynamics Modelling of Hexaslides using the Decoupled Natural Orthogonal Complement Matrices

In this paper, dynamic model of a class of parallel systems, namely, the hexaslides, is proposed. The model developed is based on the concept the decoupled natural orthogonal complement (DeNOC) matrices, introduced elsewhere. The dynamic model of hexslides, though complex due to the existence of multi-loop kinematic chains, is required for actuator power estimation, computed-torque control, optimum tool trajectory generation, etc. The use of DeNOC offers many physical interpretations, recursive algorithms, and parallel computations. Using the proposed dynamic model, a parallel inverse dynamics algorithm has been presented to compute the actuator forces. This is useful to choose suitable motors for an application. An illustration is provided using an existing machine tool based on hexaslides, namely, the HexaM, while it is carrying out a circular contouring. Secondly, the effect of leg and slider inertias is also studied, which clearly suggests that neither of these can be neglected while finding the actuator forces.