Adaptive user modelling in intelligent telephone and email assistants

With the burgeoning complexity and capabilities of modern information appliances and services, user modelling is becoming an increasingly important research area. Simple user profiles already personalise many software products and consumer goods such as digital TV recorders and mobile phones. A user model should be easy to initialise, and it must adapt in the light of interaction with the user. In many cases, a large amount of training data is needed to generate a user model, and adaptation is equivalent to retraining the system. This paper briefly outlines the user modelling problem and work done at BTexact on an intelligent personal assistant (IPA) which incorporates a user profile. We go on to describe FILUM, a more flexible method of user modelling, and show its application to the telephone assistant and email assistant components of the IPA, with tests to illustrate its usefulness.     

Quality of Crude Fish Oil Extracted from Herring Byproducts of Varying States of Freshness

ABSTRACT: Herring byproducts were stored at 2 and 15 °C for up to 72 h. Over time, significant increases of total volatile bases (TVB), histamine, putrescine, cadaverine, and tyramine were detected. However, only tyramine and TVB levels were temperature-dependent. The level of total polyunsaturated fatty acids (PUFAs) was constant. Longer byproducts storage gave rise to an oil with higher levels of free fatty acids, eicosapentaenoic acid (EPA), docosahexaenoic acid (DHA), and total PUFAs, while fluorescent compounds were lower. A higher storage temperature led to oil higher in α-tocopherol and EPA levels and lower in anisidine value. Surprisingly, the oil with the highest content of PUFAs was not produced from the freshest byproducts, and oil with low oxidation products can be extracted from stored byproducts.     

EWF method to study long term fracture properties of cross‐linked polyethylene

The influence of cross‐linking on fracture properties of polyethylene has been studied by the method of essential work of fracture (EWF). Three distinct values of the cross‐link density were obtained by β irradiation with three distinct radiation doses, and characterized by sol‐gel and solvent swelling measurements. EWF tests were performed at speeds of 0.045 to 100 mm min^–1 at 80 and 110°C. The fracture toughness, as defined from the EWF method, is analyzed through essential (w_e) and nonessential (βw_p) components. Both values were found to be decreasing functions of the cross‐link density. But cross‐linking also suppresses the toughness decrease observed in linear PE at low speeds/high temperatures. It is hypothesized that cross‐linking prevents the chain disentanglement that occurs during crack growth. In conclusion, EWF tests performed at low speeds appear as an interesting method to characterize the influence of structural factors on the fracture properties of polyethylene. POLYM. ENG. SCI., 45:424–431, 2005. © 2005 Society of Plastics Engineers     

Structure and ac properties of electron-beam evaporated zirconia thin films

The structure and ac properties of ZrO₂ thin film capacitors were studied as a function of deposition temperature. Zirconia films deposited on molybdenum electrodes were polycrystalline. The monoclinic phase was the major phase detected in the films deposited at temperatures between 300—600 °C. At lower deposition temperatures (190–200 °C), the cubic phase was the major crystalline phase formed. A major (111&#x0304;) and a minor (111) fiber axis were observed for the monoclinic phase. Average crystallite size increased from 118 to 484 Å for the (111&#x0304;) and 175 to 265 Å for the (111) crystallites as deposition temperature increased from 200 to 600 °C. Ac conduction in Mo-ZrO₂-Mo structures at fields < 0.05 MV/cm was dominated by electron hop with a frequency independent loss behavior between 25 and 150 °C. Between 150 and 325 °C, a σ_d ∝ f^y dependence was observed where y depended on measurement and deposition temperatures. The remanence of interfacial polarization was suggested as an additional loss mechanism in this temperature range and for frequencies of 60-10⁵ Hz.     

Study of a BGO calorimeter using electron and hadron beams from 1 to 50 GeV

A calorimeter of 25 bismuth germanate (BGO) crystals equipped with silicon photodiode readout has been tested at the CERN SPS in the energy range 1–50 GeV. The response for electrons has been shown to be linear in this energy range and the rms resolution obtained ( ) is approximately 1%, for E > 4 GeV. The electron/pion separation was found to be better than 1:500 in the energy range 1–20 GeV. Data on lateral and longitudinal shower development were compared with the results of a Monte Carlo simulation using the SLAC-EGS program and found to be in good agreement.     

A micromechanical model for cleavage-crack reinitiation

A crack-tip screening analysis of cleavage fracture of steel is developed. The analysis incorporates evidence that reinitiation of an arrested cleavage crack requires less stress intensity than cleavage initiation from a fatigue precrack. Fractographic evidence as well as metallographic sectioning of arrested cracks have previously shown that the mechanism of rapid crack propagation by cleavage is affected strongly by partial crack-plane deflection which leaves unbroken ligaments in its wake. The tearing of these ligaments by dimple rupture is the dominant energy-absorbing mechanism. Earlier etch-pit experiments using an Fe-Si alloy showed that the crack-tip stress intensity based on plastic zone size is extremely low. These observations are incorporated into a model in which cleavage crack reinitiation is analyzed using a sharp crack that is shielded by a distribution of pinching forces along its faces. During reloading of the arrested crack, the ligaments restrict crack-tip blunting, leading to higher local stresses. As a result, lower stress intensities are needed for reinitiation than for initiation from a fatigue precrack.     

The function of bleaching earths in the processing of palm,palm kernel and coconut oils

The results presented in the literature, which attempt to elucidate the mechanisms by which triglyceride oils are bleached by earths, are reviewed. The impact of this work and how the mechanistic proposals affect changes in oil properties are considered, with particular emphasis on the needs of the palm oil processor. Important properties include color, metals and phosphorus content and oxidative stability of the oil. Investigations made in our own laboratories have been aimed at elucidating the effect of varying physical and chemical properties of the bleaching earth on the quality of bleached and deodorized oils. Techniques used in this work are pore-size distribution, surface area, scanning and transmission electron microscopy and a variety of chemical and X-ray analysis methods. The ability to vary such parameters in montmorillonite clays by alteration of process conditions to give materials with specific performance characteristics is demonstrated. Comparisons are made between acid-activated montmorillonites and other clay types.     

Effective VLSI processor architectures for HLL computers: the RISCapproach

The design principles of reduced-instruction-set computer (RISC) architectures as they apply to VLSI implementation for high-level languages (HLLs) are presented. The nature of general-purpose HLL computations is discussed in terms of static and dynamic program measurements, and the HLL features that need efficient support are identified. CISC (complex-instruction-set computer) and RISC approaches to general-purpose HLL computers are outlined, the effects of instruction-set reduction on both code size and execution time are evaluated, and the delayed-jump concept is introduced. The Berkeley RISC architecture is presented as an example