A 10 Gbit/s OEIC photoreceiver using InP/InGaAs heterojunction bipolar transistors

Metal organic molecular beam epitaxy (MOMBE) was successfully used for the first time to realise a high speed monolithic photoreceiver. Incorporating an InGaAs pin photodetector followed by a transimpedance preamplifier circuit implemented with InP/InGaAs heterojunction bipolar transistors (HBTs), the OEIC photoreceiver had a bandwidth of 6 GHz and a midband transimpedance of 350 Omega . In a system experiment performed at 10 Gbit/s, the receiver exhibited a sensitivity of -15.5 dBm for a bit error rate of 10/sup -9/ at a wavelength of 1.53 mu m. This is the first demonstration of operation of a long wavelength OEIC photoreceiver at this speed.<>     

Sialons — Promising Refractory and Ceramic Materials

Available data on the chemical composition and structure of sialon phases are reviewed. Properties of the phases and their potential applications are discussed.     

Dynamics Modelling of Hexaslides using the Decoupled Natural Orthogonal Complement Matrices

In this paper, dynamic model of a class of parallel systems, namely, the hexaslides, is proposed. The model developed is based on the concept the decoupled natural orthogonal complement (DeNOC) matrices, introduced elsewhere. The dynamic model of hexslides, though complex due to the existence of multi-loop kinematic chains, is required for actuator power estimation, computed-torque control, optimum tool trajectory generation, etc. The use of DeNOC offers many physical interpretations, recursive algorithms, and parallel computations. Using the proposed dynamic model, a parallel inverse dynamics algorithm has been presented to compute the actuator forces. This is useful to choose suitable motors for an application. An illustration is provided using an existing machine tool based on hexaslides, namely, the HexaM, while it is carrying out a circular contouring. Secondly, the effect of leg and slider inertias is also studied, which clearly suggests that neither of these can be neglected while finding the actuator forces.     

Dynamic behaviour of a boundary layer with condensation along a flat plate: comparison with suction

The dynamical behaviour of laminar and turbulent boundary layers inside which a condensation phenomena exists, has been experimentally and numerically studied. The temperature difference between the exchange cold wall and the saturated air-steam flow at atmospheric pressure and moderate temperature ( 0–90°C) does not exceed 20°C. Evaluation of the mass flux at the wall in such a case, allows the prediction of the ‘equivalent suction rate’ in a sucked boundary layer for the same external conditions but without any temperature difference. The comparison between the two phenomena reveals interesting similarities and some differences.     

Restoration challenges for urban rivers.

Urban sources account for significant quantities of important diffuse pollutants, and urban watercourses are typically badly polluted. As well as toxic metals, hydrocarbons including PAHs, and suspended matter, priority urban pollutants include faecal pathogens and nutrients. Can urban watercourses be restored by sufficient reductions in pollution loads? Case studies in the UK and Sweden provide insights and some grounds for optimism. A major trans-Atlantic review of the performance of best management practices (BMPs) is informing BMP planning. New approaches such as the maximisation of self-purification capacity in the receiving waters may also need to be developed, alongside BMPs at source. Other initiatives in Europe, USA and China, including collaborative projects, are trying to address the intractable issues such as persistent pollutants from transport and urban infrastructure. The challenge is daunting, but there are clear ways forward and future research needs are evident.     

Brandschutz; subjektiv-?ffentliche Nachbarrechte

Nachbarn kommt kein Mitspracherecht dahingehend zu, dass die Zufahrt für Einsatzfahrzeuge der Feuerwehr gew?hrleistet sein müsste.     

Optical channel waveguides in silicon diffused from GeSi alloy

A technique for fabricating low-loss and polarisation-independent channel waveguides in silicon is reported. The waveguides are obtained by Ge-indiffusion using either a GeSi alloy or a system of alternating Ge and Si layers. Typical fabrication parameters for single-mode waveguides are given.<>