Integration of Radioactive Material with Microcalorimeter Detectors

Microcalorimeter detectors with embedded radioactive material offer many possibilities for new types of measurements and applications. We will discuss the designs and methods that we are developing for precise deposition of radioactive material and its encapsulation in the absorber of transition-edge sensor (TES) microcalorimeter detectors for two specific applications. The first application is total nuclear reaction energy (Q) spectroscopy for nuclear forensics measurements of trace actinide samples, where the goal is determination of ratios of isotopes with Q values in the range of 5–7 MeV. Simplified, rapid sample preparation and detector assembly is necessary for practical measurements, while maintaining good energy resolution. The second application is electron capture spectroscopy of isotopes with low Q values, such as \(^{163}\) Ho, for measurement of neutrino mass. Detectors for electron capture spectroscopy are designed for measuring energies up to approximately 6 keV. Their smaller heat capacity and physical size present unique challenges. Both applications require precise deposition of radioactive material and encapsulation in an absorber with optimized thermal properties and coupling to the TES. We have made detectors for both applications with a variety of designs and assembly methods, and will present their development.     

Modeling the conductance and DNA blockade of solid-state nanopores

We present measurements and theoretical modeling of the ionic conductance G of solid-state nanopores with 5-100 nm diameters, with and without DNA inserted into the pore. First, we show that it is essential to include access resistance to describe the conductance, in particular for larger pore diameters. We then present an exact solution for G of an hourglass-shaped pore, which agrees very well with our measurements without any adjustable parameters, and which is an improvement over the cylindrical approximation. Subsequently we discuss the conductance blockade ΔG due to the insertion of a DNA molecule into the pore, which we study experimentally as a function of pore diameter. We find that ΔG decreases with pore diameter, contrary to the predictions of earlier models that forecasted a constant ΔG. We compare three models for ΔG, all of which provide good agreement with our experimental data.     

A study of female urinary incontinence in general practice. Demography, medical history, and clinical findings

The aim of this study was to provide valid data on the demography, medical history and clinical findings among adult women presenting with urinary incontinence to general practitioners. In a rural community in Norway, all women > 20 years who consulted their general practitioner for urinary incontinence during a 3 year period were included in a prospective study. A thorough medical history and both a general and focused clinical examination were undertaken. Gynecological examination, stress provocation test, and 48 h frequency/volume chart and pad weighing test were also performed. 105 women were included (4.4% of women > 20 years in the total population). Mean age was 57 years, 64% were postmenopausal. A lot of comorbidity was reported. Duration of incontinence was > 5 years in 49%. By a severity index, 64% were classified as severe, 28% as moderate and 8% as having slight incontinence. 59% were using protective pads or garments. Mean leakage per 24 h was 31 g. 38% had significant genital prolapse. Contractility of the pelvic floor muscles was weak in 28%. Diagnostic classification revealed 50% stress incontinence, 10% urge and 40% mixed incontinence. 42% of the patients were a great deal or much bothered by their incontinence. Patients with stress incontinence were less bothered than others. Women presenting with urinary incontinence at a primary care level are prevalent, and often have significant incontinence. It is a challenge for the general practitioners to investigate and treat these patients optimally.     

Changes in muscle morphology, electromyographic activity, and force production characteristics during progressive strength training in young and older men

Effects of a 10-week progressive strength training program composed of a mixture of exercises for increasing muscle mass, maximal peak force, and explosive strength (rapid force production) were examined in 8 young (YM) (29+/-5 yrs) and 10 old (OM) (61+/-4 yrs) men. Electromyographic activity, maximal bilateral isometric peak force, and maximal rate of force development (RFD) of the knee extensors, muscle cross-sectional area (CSA) of the quadriceps femoris (QF), muscle fiber proportion, and fiber areas of types I, IIa, IIb, and IIab of the vastus lateralis were evaluated. Maximal and explosive strength values remained unaltered in both groups during a 3-week control period with no training preceding the strength training. After the 10-week training period, maximal isometric peak force increased from 1311+/-123 N by 15.6% (p <.05) in YM and from 976+/-168 N by 16.5% (p <.01) in OM. The pretraining RFD values of 4049+/-791 N*s(-1) in YM and 2526+/-1197 N*s(-1) in OM remained unaltered. Both groups showed significant increases (p < .05) in the averaged maximum IEMGs of the vastus muscles. The CSA of the QF increased from 90.3+/-7.9 cm2 in YM by 12.2% (p <.05) and from 74.7+/-7.8 cm2 in OM by 8.5% (p <.001). No changes occurred in the muscle fiber distribution of type I during the training, whereas the proportion of subtype IIab increased from 2% to 6% (p < .05) in YM and that of type IIb decreased in both YM from 25% to 16% (p < .01) and in OM from 15% to 6% (p < .05). The mean fiber area of type I increased after the 10-week training in YM (p < .001) and OM (p < .05) as well as that of type IIa in both YM (p < .01) and OM (p < .01). The individual percentage values for type I fibers were inversely correlated with the individual changes recorded during the training in the muscle CSA of the QF (r=-.56, p < .05). The present results suggest that both neural adaptations and the capacity of the skeletal muscle to undergo training-induced hypertrophy even in older people explain the gains observed in maximal force in older men, while rapid force production capacity recorded during the isometric knee extension action remained unaltered during the present mixed strength training program.     

Validation of [13C]urea breath test for Helicobacter pylori using a simple gas chromatograph-mass selective detector

OBJECTIVE: Isotope ratio mass spectrometry (IRMS) is the accepted method for accurately measuring the 13CO2:12CO2 ratio in the non-invasive and non-radioactive [13C]urea breath test (13C-UBT) for Helicobactor pylori. The IRMS instrument, an expensive and highly specialized analyser, is rarely available. The objective of this project was to modify and validate the use of a simple bench-top gas chromatograph-mass selective detector (GC-MSD) for 13C-UBT. METHODS: Breath samples from 71 patients were taken at baseline and 30 min after ingestion of 100 mg [13C]urea. The breath samples were analysed using GC-MSD in the selected ion monitoring mode. The reference 13CO2:12CO2 ratio was from NBS19 obtained from the US National Institute of Standards and Technology. 13CO2:12CO2 ratios of the breath samples were determined. Excess delta per thousand (per mil, delta/thousand) of the 30 min sample over the baseline (deltadelta/thousand) of > or = 6deltadelta/thousand was considered H. pylori positive. Results from 13C-UBT and histology determined blind to each other were compared. RESULTS: The coefficient of variation of the reference 13CO2:12CO2 ratio was 0.06%. Using histology as the 'gold standard', the sensitivity (97.9%) and specificity (95.8%) of the GC-MSD 13C-UBT were comparable to those of other methods of H. pylori diagnosis. CONCLUSION: A gas chromatograph coupled to a mass selective detector that is available in many analytical and biomedical laboratories can be used for the 13C-UBT. This method will increase the availability and reduce the cost of this non-invasive, non-radioactive diagnostic test.     

Benzo[b]fluoranthene: tumorigenicity in strain A/J mouse lungs, DNA adducts and mutations in the Ki-ras oncogene

The polycyclic aromatic hydrocarbon benzo[b]fluoranthene (B[b]F) is a pervasive constituent of environmental combustion products. We sought to examine the lung tumorigenic activity of B[b]F in strain A/J mice, to study the relationship between formation and decay of B[b]F-DNA adducts and to examine mutations in the Ki-ras proto-oncogene in DNA from B[b]F-induced tumors. Mice were given i.p. injections of 0, 10, 50, 100 or 200 mg/kg body wt and lung adenomas were scored after 8 months. B[b]F induced significant numbers of mouse lung adenomas in a dose-related fashion, with the highest dose (200 mg/kg) yielding 6.95 adenomas/ mouse, with 100% of the mice exhibiting an adenoma. In mice given tricaprylin, the vehicle control, there were 0.60 adenomas/mouse, with 55% of the mice exhibiting an adenoma. Based on dose, B[b]F was less active than benzo[a]pyrene. DNA adducts were analyzed qualitatively and quantitatively by 32P-post-labeling in lungs of strain A/J mice 1, 3, 5, 7, 14 and 21 days after i.p. injection. Maximal levels of adduction occurred 5 days after treatment with the 200 mg/kg dose group, producing 1230 amol B[b]F-DNA adducts/microgram DNA. The major B[b]F-DNA adduct was identified by co-chromatography as trans-9, 10-dihydroxy-anti-11, 12-epoxy-5-hydroxy-9, 10, 11, 12-tetra-hydro-B[b]F-deoxyguanosine. Approximately 86% of the tumors had a mutation in codon 12 of the Ki-ras oncogene, as determined by direct DNA sequencing of PCR-amplified exon 1 and single-stranded conformation polymorphism analysis. Analysis of the Ki-ras mutation spectrum in 25 of 29 B[b]F-induced tumors revealed the predominant mutation to be a G-->T transversion in the first or second base of codon 12, congruous with the DNA adduct data. Our data are consistent with previous reports in mouse skin implicating a phenolic diol epoxide as the proximate carcinogenic form of B[b]F that binds to guanine.     

HOST DEVELOPERS TO OBJECT TECHNICIANS Transition Strategies for OO Development

A company's decision to study and implement object technologies is just the beginning of a challenging and critical new role for software developers. Text-based, transaction processing-oriented programmers and designers can be retrained to take advantage of the opportunities object-oriented (OO) technology offers.