Microbiologic depuration of Anadara tuberculosa (Mollusca: Arcidae)

In Costa Rica the mollusk Anadara tuberculosa represents a risk for human health due to the contamination of the growing waters and the fact that its is consumed raw. The families depending on the income obtained through commercialization of these animals have a low education and economic status. Therefore, it is of great importance to develop and evaluate simple methods of depuration that could be easily used by these families to make these mollusks safe for consumption. Bottles containing 11 of saline solution (25g/l) were prepared in duplicates to test the bactericidal effect of acetic acid. The solution in each bottle was adjusted to ph 4.5, 5.0 or 5.5 or held at ph of 7.0 or 8.0 for the controls. The solution in each bottle was then inoculated with approximately 1 X 104 cfu/ml of coliforms. Counts of coliforms were determined for each bottle 0, 1, 2, 4 and 8 hours after inoculation. For the depuration studies, specimens with diameters ranging from 4.0 to 4.5 cm were collected from a harvester at the estuary of Puntarenas, Gulf of Nicoya. Fifty specimens each were depurated in separate tanks containing 25 1 of oxygenated saline solution adjusted with acetic acid to an initial ph of 4.5 (treatment) or non adjusted ph of 8.0 (control). Counts of Enterobacteriaceae were determined, in duplicates, every 12 hr for 48 hr. An additional fifty animals were depurated using the defined method and tested to determine if they met international standards of microbiological quality for aerobic plate count, Enterobacteriaceae count, Escherichia coli count and presence of Salmonella. A sensory evaluation using a triangle test was performed to compare a typical dish prepared with depurated or non-depurated animals. A significant coliform reduction was determined in a saline solution (25 g/l) at a pH range of 4.5 to 5.5. This reduction, during 8 hr, was higher in the acid treatments compared to the controls. During depuration, the elimination of Enterobacteriaceae bacteria was faster when acetic was used (initial ph = 4.5) than when it was not. This elimination was more important the first 24 hr, time defined as adequate for the application of the method. The method has the advantage of transforming the bivalve in a product that is safe for human consumption, since it guarantees that the international standards of microbiological quality, for raw and depurated mollusks, are reached. On the other hand, the sensory qualities of a typical dish prepared with depurated animals are not affected by the method, which can be easily implemented and applied by the people that work in the extraction of this mollusk.     

Modification of the calcium and calmodulin sensitivity of the type I adenylyl cyclase by mutagenesis of its calmodulin binding domain

The type I adenylyl cyclase is directly stimulated by Ca2+ and calmodulin in vitro, and the enzyme is also stimulated by increases in intracellular Ca2+ in vivo. Ca2+ stimulation of the enzyme in vivo may be due to direct interactions of the enzyme with Ca2+ and calmodulin or to an indirect mechanism involving stimulation of the enzyme by Ca(2+)-activated protein kinases. In this study, we have made several point mutations within the calmodulin binding domain to determine if the Ca2+ sensitivity of the enzyme can be modified by mutagenesis. The catalytic activities of the mutant enzymes were comparable to wild type type I adenylyl cyclase. Substitution of Cys-507 with Ser-507 did not have significant effects on the calmodulin or Ca2+ sensitivity of the enzyme. However, replacement of Lys-504 with Asp caused a 4-fold decrease in sensitivity to Ca2+. Ca2+ and calmodulin stimulation were abolished by substitution of Phe-503 with Arg-503. Stimulation of type I adenylyl cyclase activity in vivo by intracellular Ca2+ was also greatly diminished with the Arg-503 mutant indicating that Ca2+ stimulation of the enzyme in vivo is due primarily to direct interactions with calmodulin and Ca2+. These data demonstrate that the Ca2+ sensitivity of this enzyme can be modulated by point mutagenesis within the putative calmodulin binding domain and indicate that the enzyme can be directly regulated by Ca2+ and calmodulin in vivo.     

A 150 MHz 0.6 μm BiCMOS superscalar microprocessor

An implementation of the Pentium microprocessor architecture in 0.6 μm BiCMOS technology is described. Power dissipation is reduced and performance is enhanced over the previous generation. Processor features, implementation technology, and circuit techniques are discussed. An internal clock rate of 150 MHz is achieved at 3.7 V and -55°C     

The effects of impact ionization on the operation of neighboringdevices and circuits

This paper examines the detrimental effects of excess majority carriers and photons induced by impact ionization on the operation of neighboring pn junctions, bipolar transistors, MOS transistors, and circuits. The experimental results show that in addition to an increase in the substrate surface potential due to the excess majority carriers, photons can lower the barrier of a pn junction and, as a consequence, shift the Gummel plot of an npn bipolar transistor. As for the neighboring circuits, an example in which the speed of an NMOS ring oscillator is retarded by impact ionization in a neighboring NMOS transistor is presented     

Parasitic bipolar gain in fully depleted n-channel SOI MOSFET's

Fully depleted SOI MOSFET's include an inherent parasitic lateral bipolar structure with a floating base. We present here the first complete physically based explanation of the bipolar gain mechanism, and its dependence on bias and technological parameters. A simple, one-dimensional physical model, with no fitting parameters, is constructed, and is shown to agree well with simulations and measurements performed on a new type of SOI MOSFET structure. It is shown that parameters which affect the gain, such as SOI layer thickness, body doping concentration and gate and drain voltages, do so primarily by affecting the concentration of holes in the body region. Thus, current gain falls dramatically with increasing drain voltage due to the associated impact ionization driven increase in the hole concentration. Gummel plots of this parasitic bipolar indicate an apparent ideality factor of 0.5 for the hole current, due to the body hole concentration's dependence on drain voltage     

Nonsulfhydryl-reactive phenoxyacetic acids increase aqueous humor outflow facility

PURPOSE: The phenoxyacetic acid, ethacrynic acid (ECA), has potential use in glaucoma therapy because it acts to increase aqueous outflow in vivo and in vitro. In human trabecular meshwork (HTM) cell culture, ECA acts to change cell shape and attachment, effects that have been correlated with microtubule (MT) alterations and chemical sulfhydryl (SH) reactivity. To further explore these actions, we evaluated two non-SH reactive phenoxyacetic acids, inadcrinone and ticrynafen, and the MT-disrupting drug vinblastine. METHODS: Excised bovine and porcine eyes were perfused and outflow facility measured. Calf pulmonary artery endothelial and HTM cells were grown in culture and cytoskeletal effects evaluated after drug treatment. RESULTS: Indacrinone, ticrynafen, and vinblastine all caused an increase in outflow facility. In contrast with ECA, the outflow effects of indacrinone and ticrynafen were not blocked by excess cysteine. Although indacrinone and ticrynafen produced changes in cell shape in vitro, the beta-tubulin staining pattern of treated cells was not altered. Vinblastine caused cell shape change and the expected MT disruption. CONCLUSIONS: Phenoxyacetic acids can increase aqueous outflow facility and alter HTM cell shape and attachment in vitro by a non-SH, non-MT mechanism (which is probably shared also by ECA). These findings suggest the possibility of a broader class of glaucoma drugs that may be directed at the HTM. An understanding of the cellular target for these drugs has implications both for potential glaucoma therapy and for the cytoskeletal mechanisms involved in normal outflow function.     

Effect of the polymer matrices on the dielectric behavior of a percolative high-k polymer composite for embedded capacitor applications

High dielectric constant (high-k) polymer composites are of great interest for embedded capacitor applications. Previously, we demonstrated that epoxy—aluminum composites are promising for embedded capacitor applications, because they have a high dielectric constant and a low dielectric loss due to the core—shell structure of the self-passivated aluminum particles. In this work, to further understand the dielectric behavior of aluminum composites, lower-loss polymers such as silicone, polyimide, polynorbornene, and benzocyclobutene were explored as matrices for the aluminum composites. It is found that the polymer matrices can significantly change the dielectric properties of the aluminum composites. A polymer matrix with a lower dielectric constant generally results in a lower dielectric constant of its aluminum composites. In this regard, polymer—aluminum composites have a similar dielectric characteristic as polymer—ceramic composites. Thermomechanical properties of aluminum composites were characterized by a thermomechanical analyzer.     

Fuzzy rule interpolation for multidimensional input spaces in determining d50c of hydrocyclones

Fuzzy rule-based systems have been very popular in many engineering applications. In mineral engineering, fuzzy rules are normally constructed using some fuzzy rule extraction techniques to establish the determination model in predicting the d50c of hydrocyclones. However, when generating fuzzy rules from the available information, it may result in a sparse fuzzy rule base. The use of more than one input variable is also common in hydrocyclone data analysis. This paper examines the application of fuzzy interpolation to resolve the problems using sparse fuzzy rule bases, and to perform analysis of fuzzy interpolation in multidimensional input spaces.     

Adhesion improvement of thermoplastic isotropically conductive adhesive

Generally, isotropically conductive adhesive formulations include epoxy resin as the polymeric matrix. Although epoxy has superior adhesion capability, its drawbacks include the tendency to absorb moisture and lack of reworkability (thermosetting polymer). In this study, a thermoplastic polymer with low moisture absorption (0.28 wt%), called polyarylene ether (PAE2), is used in isotropically conductive adhesive (ICA) formulation. Previous research work by Lu et al. showed that the moisture absorbed into epoxy caused galvanic corrosion, which result in the formation of metal oxide . By using a polymer with low moisture absorption, the amount of water present in ICA will be small, and the corrosion rate and formation of metal oxide can be reduced. However, previous measurements of contact resistance stability of PAE2-based ICA showed that they are not stable on all surface finishes. It was determined that for thermoplastic-based ICA, poor adhesion was the main mechanism for unstable contact resistance. Two methods of adhesion improvement will be evaluated in this work. The first is to use coupling agents and the second is to blend the thermoplastic with epoxy. Both methods showed promise in improving the contact resistance stability of polyarylene ether based ICA.