A comparative dielectric relaxation study of PMN–PT and PMN–PZ ceramics using impedance spectroscopy

AC-impedance spectroscopic studies in the temperature range of 30–400 °C are carried out on solid solutions of lead magnesium niobate (PMN) with lead titanate (PT) and lead zirconate (PZ), both of them in the 65/35 atomic ratio. For PMN–PT this corresponds to the morphotropic phase boundary composition (with normal ferroelectric behaviour), and for PMN–PZ it is near the phase boundary between normal ferroelectric and relaxor ferroelectric compositions. The variation of dielectric permittivity with temperature at different frequencies shows normal ferroelectric and relaxor-like dependence for PMN–PT and PMN–PZ, respectively. Temperature-dependent spectroscopic modulus plots reveal a much broader peak for PMN–PZ compared to that for PMN–PT, which is consistent with the dielectric behaviour. PMN–PT shows nearly ideal Debye behaviour below T_m (the temperature of the permittivity maximum) and the behaviour departs from ideality above T_m, whereas non-ideal Debye behaviour is seen both below and above T_m for PMN–PZ. Complex modulus plots fit well with two depressed semicircles and three depressed semicircles, respectively, for PMN–PT and PMN–PZ. The relaxation observed in the spectroscopic plots around 1 MHz for PMN–PT has been assigned to polarisation relaxation expected for normal-sized domains. No such relaxation could be observed for PMN–PZ around 1 MHz because of the mesoscopic domain sizes.     

Reduction of Timed Hybrid Systems

We consider a class of hybrid dynamical systems and obtain conditions under which the behavior of these systems can be reduced to a finite state automaton. Specifically, we consider timed automata with more general enabling regions coupling the continuous and discrete dynamics than those previously considered. We provide a necessary condition for the existence of a finite state reduction, together with examples showing that this condition is not sufficient. We then give two sufficient conditions that provide a large class of systems with general enabling regions which admit finite reductions.     

Gastric pacing improves emptying and symptoms in patients with gastroparesis

BACKGROUND & AIMS: No effective treatment is available for patients with gastroparesis refractory to standard medical therapy. The aim of this study was to investigate the effects of gastric pacing on gastric electrical activity, gastric emptying, and symptoms in patients with gastroparesis. METHODS: Nine patients with gastroparesis participated in this study. Four pairs of cardiac pacing wires were implanted on the serosa of the stomach. The protocol consisted of two portions: a temporary inpatient study period and an outpatient study for a period of 1 month or more. RESULTS: Gastric pacing entrained the gastric slow wave in all subjects and converted tachygastria in 2 patients into regular 3-cpm slow waves. Gastric emptying was significantly improved after the outpatient treatment with gastric pacing. The gastric retention at 2 hours was reduced from 77.0% +/- 3.3% to 56.6% +/- 8.6% (P < 0.05). Symptoms of gastroparesis were substantially reduced at the end of the outpatient treatment (1.51 +/- 0.46 vs. 2.84 +/- 0.61; P < 0.04). Eight of 9 patients no longer relied on jejunostomy tube feeding, and no adverse events were noted related to the pacing unit. CONCLUSIONS: Gastric pacing seems to be able to improve symptoms of gastroparesis and to accelerate gastric emptying in patients with gastroparesis. More controlled studies are necessary to further investigate the role of gastric pacing in clinical practice.     

Analysis of fractal inter frame video coding using parallel approach

Digital video has many applications varying from telecommunications to broadcasting and so on. Video compression techniques have evolved over the past two decades with prominent technique being developed using fractal. However, this technique was not so popular because of its computationally intensive nature. This paper proposes an inter frame video compression technique, which consists of a combination of a block matching using fractal compression. The proposed algorithm is implemented on CUDA-enabled GPU which significantly reduces the encoding time of the video and provides a very high compression ratio with reasonable quality of the decoded video. Extensive simulations were carried out to analyze the performance of the proposed algorithm.     

Optimal ordering decisions under two returns policies

To avoid stockouts and maintain product availability, retailers typically carry excess units and subsequently incur higher cost. In case of style/fashion goods, demand forecasting is extremely difficult due to short selling cycles. The purpose of this study was to minimise the cost of excess stocking without compromising product availability. To achieve these conflicting objectives, our study includes two ordering instances and two returns policies. The time between orders subsequently helps resolve demand uncertainty. Existing studies consider only one type of returns policy, that is, returns on the entire purchase quantity; whereas our study considers two types of returns policies: returns on the first order size and returns on the entire purchase quantity. This study also includes models for the retailer and the supply chain system. Analytical and numerical insights into our study enable the retailer to select his appropriate returns policies to maximise his as well as system’s expected profits. We also show that perfect coordination of partners will help them improve their profits considerably.     

Nanocomposites based on transition metal oxides in polyvinyl alcohol for EMI shielding application

In the present work, the nanocomposites based on different transition metal oxides like iron oxide (Fe₂O₃), zinc oxide (ZnO), silicon dioxide (SiO₂), zirconium dioxide (ZrO₂), and titanium dioxide (TiO₂) in PVA matrix have been studied for their suitability as electromagnetic interference (EMI) shielding materials in the frequency range of 4–8 GHz (C-band) and 8–12 GHz (X-band). The nanocomposites containing 0.1, 0.5, 1.0, 5.0, and 10.0 wt% of oxides in the matrix were synthesised by solvent casting method. The EMI attenuation studies in 4–12 GHz frequency range were carried out using the Vector Network Analyzer R & S: ZVA40 method by measuring the loss due to reflection. The minimum reflectivity values for the composites containing Fe₂O₃, ZnO, SiO_2, ZrO₂, and TiO₂ in PVA matrix at 10 wt% concentration level in the matrix were found to be ?38.85 dB (10.4 GHz), ?33.65 dB (10.4 GHz), ?41.90 dB (10.4 GHz), ?24.90 dB (11.0 GHz), and ?32.90 dB (9.76 GHz), respectively. Based on these results, the SiO₂- and Fe₂O₃-based composites, which also exhibit high thermal stability and mechanical strength, are found to be low-cost and efficient EMI shielding materials.     

Nanomedicine-Based Delivery Strategies for Breast Cancer Treatment and Management

Breast cancer is one of the most common types of cancer among women globally. It is caused by mutations in the estrogen/progesterone receptors and conventional treatment methods are commonly utilized. About 70–80 percent of individuals with the early-stage non-metastatic disease may be cured. Conventional treatment is far less than the optimal ratio, as demonstrated through the high mortality rate of women with this cancer. However, conventional treatment methods like surgery, radiotherapy, and chemotherapy are not as effective as expected and lead to concerns about low bioavailability, low cellular uptake, emerging resistance, and adverse toxicities. A nanomedicine-based approach is a promising alternative for breast cancer treatment. The present era is witnessing rapid advancements in nanomedicine as a platform for investigating novel therapeutic applications and modern intelligent healthcare management strategies. This paper focuses on nanomedicine-based therapeutic interventions that are becoming more widely accepted for improving treatment effectiveness and reducing undesired side effects in breast cancer patients. By evaluating the state-of-the-art tools and taking the challenges involved into consideration, various aspects of the proposed nano-enabled therapeutic approaches have been discussed in this review.     

Yield and Quality Characteristics of Rendered Chicken Oil for Biodiesel Production

Whole dead poultry birds obtained from commercial layer farms were assessed for fat in the whole carcass and then dry rendered in three different rendering regimens T₁, T₂ and T₃ (temperature = 120, 130 and 140 °C and shell pressure = 1, 2 and 3 kg/cm² respectively) and the effect on the yield and quality of the rendered chicken oil were studied. The overall fat percentage of the whole dead poultry carcass was 14.55 ± 0.17 % and the fat content of ‘greaves’ was 14.49 ± 0.38 %. In the dry batch rendering trials, the mean overall fat recovery was 24.46 ± 1.19, 26.78 ± 3.14 and 22.42 ± 2.32 % and the overall fat yield was 3.52 ± 1.72, 3.84 ± 0.44 and 3.22 ± 0.33 % of the carcass weight in T₁, T₂ and T₃ respectively. Solvent extraction of fat could recover 96.10 ± 0.14 % of fat from ‘greaves’ which was significantly higher than the mechanical centrifugation method. Among the quality characteristics of the rendered chicken oil (RCO), moisture content ranged from 0.61 % (T₂) to 1.09 % (T₁) and the mean specific gravity was 0.91 at 30 °C. The FFA values of RCO obtained from the T₃ rendering regimen were significantly (p < 0.05) higher than the FFA values of T₂ and T₁. The mean acid value, iodine number, peroxide value, saponification value and unsaponifiable matter present in RCO showed no significant difference. The fatty acid profile and calorific values were studied. The RCO was converted to biodiesel by transesterification and the physico-chemical properties of the biodiesel were studied and compared with the Indian biodiesel specification.     

Melt‐mixed polypropylene/acrylonitrile‐butadiene‐styrene blends with multiwall carbon nanotubes: Effect of compatibilizer and modifier on morphology and electrical conductivity

Cocontinuous blends of 45/55 polypropylene (PP)/acrylonitrile‐butadiene‐styrene (ABS) with multiwall carbon nanotubes (MWNT) were prepared by melt‐mixing in a conical twin‐screw microcompounder. PP‐grafted‐maleic anhydride (PP‐g‐MA) and styrene MA were used as compatibilizers for PP/ABS blends. Scanning electron microscopic observations showed phase segregation of PP‐g‐MA in the blends. State of dispersion of MWNT in the presence or absence of the compatibilizers was assessed through AC electrical conductivity measurements and crystallization studies of the blends. An improvement in AC electrical conductivity was observed in blends in presence of either styrene MA or dual compatibilizers. The lowest electrical percolation threshold was achieved at 0.1 wt % of MWNT using sodium salt of 6‐amino hexanoic acid‐modified MWNT. Significant increase in crystallization temperature of PP phase of blends with MWNT was observed in the presence of compatibilizers as compared to blends without compatibilizers. An attempt has been made to address the complex issues of phase segregation, compatibilization, and dispersion of MWNT in cocontinuous blends of PP/ABS. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011