Fertigung einer universellen Hüftprothesenpfanne mittels Hochdruckblechumformung

In recent years, the use of hip prostheses has become a routine procedure. The use of total hip replacement has evolved in recent years to a routine procedure. Despite this experience, it always comes back to complications. Especially the migration or loosening of the acetabular component because of the artificial load adaptive bone remodeling is still a current problem. This is due to the changing mechanical situation after the implantation of the prosthesis. Another problem is the high bone loss during implantation, which complicates a revision of the prosthesis. One solution is the use of patient‐specific prostheses. So far, the use of these prostheses is limited due to the time‐consuming and cost‐intensive production. The overall objective of the presented project in this publication is the development and establishment of an innovative concept for the production of patient‐specific hip prosthesis made of titanium plates by sheet metal forming. The idea of this concept involves the development of a two‐stage process. First of all a standardized hip prosthesis is made by high‐pressure sheet metal forming and then individually in the second step. This publication contains the derivation of the standard prosthesis. For this purpose, a design methodology was generated, based on the so‐called agglomerative clustering. In addition, presents the results of the numerical preliminary design of the first stage of the process and the tool developed concept in the course of this paper.     

BaTiO3 incorporation effect on the dielectric properties of polymer from aqueous emulsion: An enhanced dispersion technique

An economic and environment friendly process was adapted to synthesize new dielectric composite materials. Using ethylene vinyl acetate (EVA)/vinyl ester of versatic acid (VeoVa) terpolymer as an aqueous emulsion provides a homogenous dispersion of BaTiO₃ (BT) particles, due to the high viscosity and polarity of the vinyl resin (VR). Composites films were obtained from these dispersions by water evaporation. The evolution of the dielectric properties as a function of the BaTiO₃ content, was correctly fitted by a Maxwell‐Garnett model. This fitting of the experimental curve shows a good dispersion of filler in the vinyl resin and the particles separation by a layer of resin as expected for the preparation method used in this study. The VR/BT composites show good synergy between the dielectric properties of the different phases of the composites due to the formation of macrodipoles and to the strong interactions between polar EVA/VeoVa groups and the BaTiO₃ particles surface. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44333.     

Thermo‐responsive polyurethane hydrogels based on poly(ethylene glycol) and poly(caprolactone): Physico‐chemical and mechanical properties

In this work, we present the synthesis and characterization of chemically crosslinked polyurethanes (PU) composed of poly(ethylene glycol) (PEG) and poly(caprolactone) diol (PCL‐diol), as hydrophilic and hydrophobic segments respectively, poly(caprolactone) triol (PCL‐triol), to induce hydrolysable crosslinks, and hexamethylene diisocyanate (HDI). The syntheses were performed at 45 °C, resulting in polyurethanes with different PEG/PCL‐diol/PCL‐triol mass fractions. All the PUs are able to crystallize and their thermal properties depend on the global composition. The water uptake capacities of the PU increase as the PEG amount increases. The water into hydrogels is present in different environments, as bounded, bulk and free water. The PU hydrogels are thermo‐responsive, presenting a negative dependence of the water uptake with the temperature for PEG rich networks, which gradually changes to a positive behavior as the amount of poly(caprolactone) (PCL) segments increases. However, the water uptake capacity changes continuously without an abrupt transition. Scanning electron microscopy (SEM) analyses of the hydrogel morphology after lyophilization revealed a porous structure. Mechanical compression tests revealed that the hydrogels present good resilience and low recovery hysteresis when they are subject to cycles of compression–decompression. In addition, the mechanical properties of the hydrogels varies with the composition and crosslinking density, and therefore with the water uptake capacity. The PU properties can be tuned to fit for different applications, such as biomedical applications. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43573.     

Comparative Study of Ultrasonication-Induced and Naturally Self-Assembled Silk Fibroin-Wool Keratin Hydrogel Biomaterials

This study reports the formation of biocompatible hydrogels using protein polymers from natural silk cocoon fibroins and sheep wool keratins. Silk fibroin protein contains β-sheet secondary structures, allowing for the formation of physical cross-linkers in the hydrogels. Comparative studies were performed on two groups of samples. In the first group, ultrasonication was used to induce a quick gelation of a protein aqueous solution, enhancing the ability of Bombyx mori silk fibroin chains to quickly entrap the wool keratin protein molecules homogenously. In the second group, silk/keratin mixtures were left at room temperature for days, resulting in naturally-assembled gelled solutions. It was found that silk/wool blended solutions can form hydrogels at different mixing ratios, with perfectly interconnected gel structure when the wool content was less than 30 weight percent (wt %) for the first group (ultrasonication), and 10 wt % for the second group (natural gel). Differential scanning calorimetry (DSC) and temperature modulated DSC (TMDSC) were used to confirm that the fibroin/keratin hydrogel system was well-blended without phase separation. Fourier transform infrared spectroscopy (FTIR) was used to investigate the secondary structures of blended protein gels. It was found that intermolecular β-sheet contents significantly increase as the system contains more silk for both groups of samples, resulting in stable crystalline cross-linkers in the blended hydrogel structures. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) were used to analyze the samples’ characteristic morphology on both micro- and nanoscales, which showed that ultrasonic waves can significantly enhance the cross-linker formation and avoid phase separation between silk and keratin molecules in the blended systems. With the ability to form cross-linkages non-chemically, these silk/wool hydrogels may be economically useful for various biomedical applications, thanks to the good biocompatibility of protein molecules and the various characteristics of hydrogel systems.     

Electro-osmosis treatment techniques and their effect on dewatering of soils,sediments, and sludge: A review

Electro-osmosis is an established method of dewatering fine soils, sediments, and sludge (SSS). The efficiency of electro-osmotic treatment is controlled by the electrical resistance of the system. Due to an increase in SSS resistance during treatment, its cost efficiency is reduced, limiting the widespread use of this technique. The aim of this paper is to discuss the main reasons for the increase in SSS resistance during treatment and then to analyze the most recent and widely spread modifications to classical electro-osmotic treatment that attempt to combat these issues and improve the efficiency of the technique. These modifications to electro-osmotic treatment are polarity reversal, an intermittent current, the injection of chemical solutions at the electrodes, and the use of geo-synthetics. The paper discusses the relevant research on the above adaptations, and the advantages and disadvantages of each are evaluated and compared using the available laboratory and field tests in the literature on electro-osmotic dewatering research. All four methods of modification are shown to provide significant improvements and can be successfully translated to the field for greater use. However, the improvements they bring about may not be sufficient to warrant their general use in geotechnical applications.     

The effect of monoethylene glycol on the stability of water-in-oil emulsions

It is important from both a strategic and economic standpoint to study the mechanism of formation of water/oil emulsions, to predict their increase of viscosity with respect to that of the crude oil, and to obtain information about the stability vs separation of these substances (since their presence can impair oil processing and distribution). The objective of this work was to ascertain the influence of monoethylene glycol (MEG) on these parameters and its action mechanism. The addition of MEG in different proportions in the oil emulsions significantly changed the flow curve of the emulsion, passing from a quasi-Newtonian one to a shear thinning behaviour. Besides this, when MEG was present at low concentrations, the demulsification process was slow and an increase in concentration made the emulsions more stable than samples containing the same aqueous phase proportion. Under the conditions studied, the addition of MEG did not reduce the quantity of the aqueous phase separated compared to the emulsions free of MEG, but significantly delayed the demulsification process. Rheology provided important information regarding the phase separation process of the aqueous phase in oil phase emulsions, and dynamic testing suggested that the most relevant effect of the addition of MEG is an increase of the emulsion elasticity that can be correlated with the increase in the emulsion stability observed by bottle test and Turbiscan.     

New filtrate loss controller based on poly(methyl methacrylate‐co‐vinyl acetate)

The drilling of petroleum wells requires the use of suitable drilling fluids to ensure efficient operation without causing rock damage. Specific polymers have been used to control infiltration during drilling, to reduce operational problems. In this study, spherical microparticles of poly(methyl methacrylate‐co‐vinyl acetate) were synthesized (by suspension polymerization), characterized, and evaluated in terms of their performance in controlling filtrate loss of aqueous fluids. A filter press test with ceramic disk, simulating the rock, was used. The performance of the synthesized materials was compared with commercial polymers. It was observed that the performance of the material is directly associated with the relation between particle size and pore size of the rock specimen. Furthermore, for a suitable particle size, the rubbery characteristic of the material produces a more efficient filter cake, for filtrate control. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40646.     

The Association between Gut Microbiota and Osteoarthritis: Does the Disease Begin in the Gut?

Some say that all diseases begin in the gut. Interestingly, this concept is actually quite old, since it is attributed to the Ancient Greek physician Hippocrates, who proposed the hypothesis nearly 2500 years ago. The continuous breakthroughs in modern medicine have transformed our classic understanding of the gastrointestinal tract (GIT) and human health. Although the gut microbiota (GMB) has proven to be a core component of human health under standard metabolic conditions, there is now also a strong link connecting the composition and function of the GMB to the development of numerous diseases, especially the ones of musculoskeletal nature. The symbiotic microbes that reside in the gastrointestinal tract are very sensitive to biochemical stimuli and may respond in many different ways depending on the nature of these biological signals. Certain variables such as nutrition and physical modulation can either enhance or disrupt the equilibrium between the various species of gut microbes. In fact, fat-rich diets can cause dysbiosis, which decreases the number of protective bacteria and compromises the integrity of the epithelial barrier in the GIT. Overgrowth of pathogenic microbes then release higher quantities of toxic metabolites into the circulatory system, especially the pro-inflammatory cytokines detected in osteoarthritis (OA), thereby promoting inflammation and the initiation of many disease processes throughout the body. Although many studies link OA with GMB perturbations, further research is still needed.