Non-aqueous titration of the acidic groups in coals: a warning!

Non-aqueous potentiometric titration using ethylenediamine as a solvent and sodium aminoethoxide as a titrant has been shown to be reliable for the estimation of total acidity only when the substrate is completely dissolved in the solvent.     

Tuning of ultraviolet-curable ink printability via in situ ultraviolet irradiation during direct ink write applications

Direct ink write deposition facilitates line-by-line extrusion of inks spanning wide viscoelastic ranges. Following deposition, post processing technologies permit tuning of the extrudate's material property characteristics—ultraviolet (UV) irradiation, facilitating the photopolymerization of UV-reactive catalyst solutions, permits targeted modification of the extrudate's microstructure and in situ tuning of extrudate macrostructure. This report analyzes the morphological, rheological, and microstructural property relationships governing the printability, and processivity, of extruded UV-curable resin inks for delineation of sufficiency and optimization of ink printability utilizing direct ink write technologies. A design-of-experiments approach is implemented to quantify significance regarding an extrudate's dimensional response to extrusion parameter variation and in situ processing parameters, identifying proportionally of nozzle velocity, nozzle height, and UV irradiation exposure with extrudate aspect ratio, reflected by respective maximum extrudate aspect ratio increases of 158% and 109%, regarding 121 and 123K resin inks. Finally, the relationship between extrudate morphology and microstructure variation was assessed via dielectric cure monitoring, whereby an extrudate's ion viscosity was calculated in relation to its rheological modulus, reflecting the relationship between an extrudate's morphology, rheological response, and printability, regarding its microstructural variation.     

Pilocarpine‐loaded poly(DL‐lactic‐co‐glycolic acid) nanoparticles as potential candidates for controlled drug delivery with enhanced ocular pharmacological response

The poor corneal residence time of pilocarpine, an alkaloid extracted from the leaves of the Jaborandi plant, limits its ocular application. The aim of this study was to develop, characterize, and evaluate the potential of pilocarpine entrapped by poly(DL ‐lactic‐co‐glycolic acid) (PLGA) nanoparticle carriers for ocular drug delivery. Pilocarpine‐loaded nanoparticles were prepared with a double‐emulsion (water in oil in water) method and characterized with transmission electron microscopy and X‐ray diffraction analysis. The nanoparticles exhibited an average size of 82.7 nm with an encapsulation efficiency of 57%. Stability studies showed the absence of agglomeration and constancy in the amount of drug entrapped; this indicated the solidity of these particles for long‐term use. The in vitro release studies conducted in simulated tear fluid showed the sustained release of pilocarpine. In vivo evaluation of the nanoparticles was done in a rabbit model with a miosis assay and compared to an equal dose of commercially available eye drops of pilocarpine (Pilocar drops). The in vivo miosis studies showed that the duration of miotic response increased by 40% for the nanoparticles and produced an almost 68% increase in total miotic response when compared to the eye drops. In conclusion, this study clearly demonstrated the potential of pilocarpine‐loaded PLGA nanoparticles for multiplying the therapeutic effect of ophthalmic drug delivery with enhanced bioavailability and pharmacological response. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

High-Thermal-Conductivity Aluminum Nitride Ceramics: The Effect of Thermodynamic, Kinetic, and Microstructural Factors

Improvement in the thermal conductivity of aluminum nitride (AlN) can be realized by additives that have a high thermodynamic affinity toward alumina (Al₂O₃), as is clearly demonstrated in the aluminum nitride-yttria (AlN-Y₂O₃) system. A wide variety of lanthanide dopants are compared at equimolar lanthanide oxide:alumina (Ln₂O₃: Al₂O₃, where Ln is a lanthanide element) ratios, with samaria (Sm₂O₃) and lutetia (Lu₂O₃) being the dopants that give the highest- and lowest-thermal-conductivity AlN composites, respectively. The choice of the sintering aid and the dopant level is much more important than the microstructure that evolves during sintering. A contiguous AlN phase provides rapid heat conduction paths, even at short sintering times. AlN contiguity decreases slightly as the annealing times increase in the range of 1–1000 min at 1850°C. However, a substantial increase in thermal conductivity results, because of purification of AlN grains by dissolution-reprecipitation and bulk diffusion. Removal of grain-boundary phases, with a concurrent increase in AlN contiguity, occurs at high annealing temperatures or at long times and is a natural consequence of high dihedral angles (poor wetting) in liquidphase-sintered AlN ceramics.     

Epoxidized linolenic acid salts as multifunctional additives for the thermal stability of plasticized PVC

Calcium and zinc salts of epoxidized linolenic acid were synthesized and used as multifunctional additives, to minimize or prevent the reaction of epoxidized soybean oil (ESO) with liberated hydrochloric acid (HCl) during the thermal degradation of poly(vinyl chloride) (PVC) in particular. These metal epoxy salts were incorporated as thermal stabilizers for both diisodecyl phthalate and ESO–plasticized PVC blends that underwent thermal degradation studies at 170°C. The overall performance of these metal epoxy salts was examined by thermal gravimetric analysis and visual color retention of the PVC blends. The weight loss profiles of the metal salt stabilized PVC were comparable to those of blends containing metal stearates. There were, however, vast improvements in color retention of the plasticized PVC using these novel additives. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41736.     

Optimization of Mixing and Mass Transfer in In-line Multi-Jet Ozone Contactors Using Computational Fluid Dynamics

Typical ozone mixing and mass transfer calculations are lumped approaches based on ideal operating conditions and can misrepresent behavior in real-life installations. This article models the effect of local hydrodynamics and mixing on the overall mass transfer of ozone into water with the aid of multiphase computational fluid dynamics (CFD). CFD models were validated with measured data from a pipeline ozone contactor installation which was optimized for more rapid, uniform mixing and mass transfer. Results emphasize the sensitivity of mixing quality to nozzle placement, size, orientation and spacing relative to main pipeline diameter and flows.     

Recovery of polyphenols from camu-camu (Myrciaria dubia H.B.K. McVaugh) depulping residue by cloud point extraction

In this study the potential of cloud point extraction formed by a non-ionic surfactant was used in order to separate polyphenols from industrial residues of camu-camu. The effects of operational conditions of the cloud point extraction (CPE) on the polyphenol recovery and volumetric ratio were investigated. The results showed a maximum recovery of 95.71% that was obtained using 7.0 wt% Triton X-114, native pH (3.25), and 80 wt% polyphenol extract at 30 °C. The use of cloud point extraction was successful to recover the polyphenols from agroindustrial residue since it is a simple as well as of low-cost technique.     

Combined spectroscopic/computational studies on Fe- and Mn-dependent superoxide dismutases: insights into second-sphere tuning of active site properties

Superoxide dismutases (SODs) are metalloenzymes that protect aerobic organisms from oxidative damage mediated by the superoxide radical. While the Fe- and Mn-dependent SODs from E. coli possess virtually identical protein folds and active-site geometries, they are strictly metal specific. To explore the origin of this extraordinary metal-ion specificity and to elucidate the mechanisms by which these enzymes tune the geometric and electronic properties, and thus the reactivity, of their active-site metal ions, we utilized a combination of spectroscopic and computational methods to study the native enzymes, their metal-substituted derivatives, and several mutant proteins. Results from our research described in this Account reveal that second-sphere residues are critically involved in controlling both thermodynamic and kinetic properties of the Fe- and MnSOD active sites.