Ultrastructural and biochemical changes of hepatocytes during ether and fluothane anesthesia under experimental conditions

A study was made of a possibility of using Soviet made membranes "Vladipor" with a pore diameter of 16--17 nm for the purpose of concentration and purification of antigenic extracts from stab cultures of S. typhi obtained by the action of typsin, hydrogen peroxide and detergents. Preparations, complete by antigenic structure, were obtained by ultrafiltration, with a good yield. The maximal rate of ultrafiltration was noted in case of "peroxide" antigenic preparations. The use of diafiltration provided a significant reduction of the ash content in the end products.     

Comparative performance of open and totally enclosed machines

Continuous improvements in insulating materials, manufacturing consistencies in sealed windings and extensive laboratory testing of various systems show that synchronous machines with NEMA II construction can replace totally enclosed machines. Tests on windings in corrosive atmospheres show that sealed insulation systems are impervious to the environment. Standard maintenance ensures that incendive arcing will not be generated in potentially hazardous environments. When compared to totally enclosed machines, the NEMA II-type construction is lighter, more efficient, has lower short-circuit current and associated torques and is easier to maintain     

Labelled-replica techniques: post-shadow labelling of intramembrane particles in freeze-fracture replicas

Three methods are described for direct post-fracture, post-shadow labelling of individual classes of intramembrane particles (IMPs) in freeze-fracture replicas of biological membranes. The P-face IMPs corresponding to the acetylcholine receptor complexes (AChRs) of vertebrate neuroeffector junctions are identified by post-replication labelling with ferritin-antibody complexes and with neurotoxin-biotin-avidin-colloidal gold affinity ligands. (The freeze-etch nomenclature of Branton et al., 1975, is used in this report.) These post-shadow labelling techniques resemble conventional en bloc labelling techniques except that the labelling reagents must penetrate a thin but discontinuous layer of platinum superimposed on the molecules of interest. In the ‘sectioned labelled-replica technique’, the replicated and labelled tissues are stained, embedded in plastic and sectioned parallel to the replica-tissue interfaces. In the direct ‘labelled-replica techniques’, the replicated and labelled samples are freeze-dried or critical point dried, the labelled surfaces are stabilized by carbon coating, and the underlying tissues are dissolved, allowing the labelled-replicas to be examined as conventional freeze-fracture replicas. The unshadowed side of each AChR IMP is shown to retain sufficient biochemical information to permit both immunospecific and neurotoxin specific labelling despite formaldehyde fixation, freezing, fracturing, platinum shadowing, and thawing in aqueous media. A new mixed ferricyanide-osmium staining method reveals electron opaque structures spanning the membrane bilayer in the same size, number and distribution as the labelled IMPs. These experiments demonstrate the feasibility of identifying individual IMPs in freeze-fracture replicas and may allow the identification of specific membrane lesions in human disease.     

Use of vibratory polishing for the location of ion-bombardment induced voids in metal foils

The technique of vibratory polishing has been successfully applied to the controlled removal of surfaces for examination of ion-irradiation damage structure in nickel, a nickel-based alloy, and stainless steel. The application of this technique to the study of voids formed in localized layers in nickel and stainless steel during high dose 20 MeV carbon ion irradiation is described. Transmission electron microscopy observations of the vibratory polished surfaces reveal mechanical damage in the form of linear tracks (～ 100 nm wide) which are produced by the abrasive Al₂O₃ particles used for polishing. These tracks do not prevent observation of irradiation damage structure. An example is shown of a thin (～ 100 nm edge thickness) foil produced entirely by this mechanical polishing process. It is proposed that this technique will be equally applicable to the preparation of transmission electron microscope specimens from a wide range of metals, from alloys containing second-phase particles and from ceramics, glasses and oxides which are not amenable to preparation by chemical or electro-polishing.     

Facile Synthesis and Proposed Mechanism of α,ω‐Oxetanyl-Telechelic Poly(3-nitratomethyl-3-methyl oxetane) by an SN2(i) Nitrato Displacement Method in Basic Media

The synthesis of a novel heterocyclic–telechelic polymer, α,ω-oxetanyl-telechelic poly(3-nitratomethyl-3-methyl oxetane), is described. Infrared spectroscopy (IR), gel permeation chromatography (GPC), and nuclear magnetic resonance (NMR) spectroscopy have been used to confirm the successful synthesis, demonstrating the presence of the telechelic-oxetanyl moieties. Synthesis of the terminal functionalities has been achieved via displacement of nitrato groups, in a manner similar to that employed with other leaving groups such as azido, bromo, and nitro, initiated by nucleophiles. In the present case, displacement occurs on the ends of a nitrato-functionalized polymer driven by the formation of sodium nitrate, which is supported by the polar aprotic solvent N,N-dimethyl formamide. The formation of an alkoxide at the polymer chain ends is favored and allows internal back-biting to the nearest carbon bearing the nitrato group, intrinsically in an S_N2(i) reaction, leading to α,ω-oxetanyl functionalization. The telechelic-oxetanyl moieties have the potential to be cross-linked by chemical (e.g., acidic) or radiative (e.g., ultraviolet) curing methods without the use of high temperatures, usually below 100°C. This type of material was designed for future use as a contraband simulant, whereby it would form the predominant constituent of elastomeric composites comprising rubbery polymer with small quantities of solids, typically crystals of contraband substances, such as explosives or narcotics. This method also provides an alternative approach to ring closure and synthesis of heterocycles.     

Solvent Influence on the Hydrodeoxygenation of Guaiacol over Pt/SiO2 and Pt/H‐MFI 90 Catalysts

Second generation biofuels are produced in the bioliq® process at the Karlsruhe Institute of Technology via gasification of pyrolysis oil and synthesis of gasoline from the emerging synthesis gas. An alternative strategy is the direct upgrading of the pyrolysis oil by hydrodeoxygenation (HDO). The present study reports on the HDO of guaiacol as one of the phenolic compounds strongly abundant in such mixtures. Special focus was laid on the solvent influence using Pt‐based catalysts. Higher HDO ability was seen using nonpolar solvents and acidic supports. Characterization of the catalysts before and after the test showed that the solvent did not only influence the reactivity, but also the catalyst stability.     

Wild Ways and Paths of Pleasure: Access to British waterfalls, 1500–2000

In Britain the rise of tourism, largely associated with the Romantic taste for landscape, encouraged travel to relatively inaccessible areas. Among travellers in search of the picturesque and the sublime, waterfalls were particularly popular, but these were commonly difficult and dangerous places to visit. The impact of tourism on the evolution of the landscape at waterfall sites over a period during which people travelled to tourist centres on horseback, by coach, by rail and by motor vehicle is examined. Drawing on topographical, travel and tourist literature from the sixteenth century to 2000, together with extensive field observation, the evolution from the 'natural' to the designed landscape, created to meet the needs of, and to attract, visitors, is considered. It is demonstrated how, while facilitating visits to natural attractions such as waterfalls, improved access and the provision of amenities have changed valued landscapes and, hence, the visitor's experience of them.     

Characteristics and 3D formation of PVA and PEO electrospun nanofibers with embedded urea

The behavior of electrospun polyvinyl alcohol (PVA) and polyethylene oxide (PEO) nanofibers embedded with urea is studied as a function of various process parameters. Our results show that three‐dimensional nanofiber networks can be obtained when high concentrations of urea in the solution are used during electrospinning. The nanofibers are characterized using both scanning electron microscope (SEM) and Fourier transform infrared spectroscopy (FTIR). The stability of the nanofiber as a function of electric field has also been studied. The successful formation of three‐dimensional nanofiber networks can open new trends toward applications in fertilizers containing nanofibers in the nanoagricultural field. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39840.     

Numerical calibration of donor systems for some GAP tests

Numerical models of various donor/attenuator systems utilized in gap tests were evaluated with the DYNA2D hydrocode. Three donor (pressed pentolite)/attenuator (PMMA) configurations were tested. Case I and Case 2 had a pentolite donor which was 2 cm × 2 cm right cylinder; the cell size was smaller in Case 1. Case 3 utilized a composite pentolite donor 2.07 cm long but having stepped diameters of one and two cm; the cell size was quite similar to that of Case 2. Peak (axial) pressure versus distance results from Case 1 were scaled and Compared to experimental data for both the NOL large scale gap test (LSGT) and the NSWC expanded large scale gap test (ELSGT). The comparison was found to be very good for the LSGT but less satisfactory for the ELSGT. Peak (axial) pressure versus distance results from Case 1 were the also compared to Case 2, a coarser zoned model similar to Case 1, and Case 3. This comparison showed that the composite donor produced peak (axial) pressures similar to those from the LSGT model. Normalized peak pressure versus radial distance and shock profiles were compared for the three cases and found to be quite similar. Additional normalized peak pressure versus radial distance and normalized pressure versus time information from Case 1 is plotted to show how the pentolite/PMMA rarefaction affects both the axial and radial pressure-time histories.