Application of the T-integral and S criteria in finite element analysis of impact damage at fastener holes in graphite/epoxy laminates under compression

This paper illustrates the application of two fracture criteria, Atluri's T^*-integral and Sih's strain energy density factor S for estimating the residual strength of an impact damaged fastener hole in a composite laminate. Finite element analyses are performed, and the magnitude and distribution of T^* and S are determined around the delamination. It is found that the profiles of these distributions are extremely complex and sensitive to the modelling of the stress fields close to the delamination. The effects of local closure, shear moduli and cracktip singularity are investigated. It is also shown that the representation of the stress singularity in the finite element model has a strong effect on the distribution of T^* and S. The distribution of both T^* and S is such that three local maxima occur and are situated at the same locations around the delamination. These locations approximately coincide with the points of maximum growth as revealed by ultrasonic C-scan of the damage growth of several specimens. The T^*-integral is shown to be more sensitive to the values of interlaminar shear moduli than S. The results of the analyses suggest that both the T^*-integral and S criteria may be successfully employed in the prediction of residual strength. However, S is better at predicting the direction of damage growth provided the stress fields near the delamination can be accurately modelled.     

A strain hardening failure assessment diagram derived from carbon-manganese steel compact tension specimens

A failure assessment diagram is derived from carbon-manganese steel compact tension specimens. The diagram has been determined from an elastic-plastic finite element analysis of a compact tension specimen geometry. The diagram has been validated by using experimental fracture toughness data obtained on the same steel and specimen geometry modelled in the finite element analysis. The plastic collapse load has been determined empirically for this geometry.It is shown that a non-work-hardening failure assessment diagram is not a good representation of the experimental data and that the computed failure assessment diagram is more appropriate for describing the behaviour of the carbon-manganese steel specimens.     

Increased analytical precision in the hollow cathode discharge emission source by improved discharge current control.

A significant improvement in the precision of the hollow cathode as an emission source is reported. Precision of 1% or less has been observed several times over periods of several hours. An average long-term stability of 4.3% for Ll and 6.0% for Na in the emission signal from microsamples (less than 50 nL) deposited in the hollow cathode discharge source is reported. The improved precision is attributed primarily to the introduction of electronics that hold the discharge current more nearly constant and to the shielding of all wiring to the source from the power supply. A current-controlled switch that is capable of driving a hollow cathode discharge in either dc or pulsed mode is described. This switch is capable of generating current pulses as short as 2 microseconds through a resistive load and greatly improves the discharge stability and repeatability at turn-on in both the dc and pulsed modes. The characteristics of pulses produced by this switch are presented; however, analytical performance is reported only for the dc mode. Temporal current plots are presented for the new instrumentation and compared to plots taken with commonly used current-controlled power supplies. Instrumentation, operation, and sample preparation procedures are described. Typical temporal profiles of the emission signal from microsamples deposited in AI and stainless steel hollow cathodes are given.     

Protein phosphorylation: technologies for the identification of phosphoamino acids

Protein phosphorylation plays a central role in many biological and biomedical phenomena. In this review, while a brief overview of the occurrence and function of protein phosphorylation is given, the primary focus is on studies related to the detection and analysis of phosphorylation both in vivo and in vitro. We focus on phosphorylation of serine, threonine and tyrosine, the most commonly phosphorylated amino acids in eukaryotes. Technologies such as radiolabelling, antibody recognition, chromatographic methods (HPLC, TLC), electrophoresis, Edman sequencing and mass spectrometry are reviewed. We consider the speed, simplicity and sensitivity of tools for detection and identification of protein phosphorylation, as well as quantitation and site characterisation. The limitations of currently available methods are summarised.     

A potential role for angiotensin II-induced vascular endothelial growth factor expression in the pathogenesis of diabetic nephropathy?

The relationship between sensory quality of carrots and their contents and composition of essential oils and total sugars as influenced by nitrogen fertilization was investigated. Carrots (Daucus carota L.) of the variety 'Nanthya' F1 (S&G Sandoz Seeds) were grown in Weihenstephan 1996 with three levels of inorganic nitrogen fertilization (3 levels in 4 replications). Medium- and higher-boiling flavour-components were extracted as essential oils and separated gas-chromatographically (GC-FID). Lower-boiling flavour-components were taken from the headspace and analysed chemosensorially. The human sensory assessments were performed by an untrained panel of 300 people (students and employees of the TU München)--these results were compared with those of the chemical analyses. Carrots with lower nitrogen application were found to taste more intensive, more fruity, sweeter and better and at the same time less bitter and less earthy. They had higher contents of total sugar and a higher percentage of dry matter. Fertilization with nitrogen does not only affect the quantity but also the composition of the essential oils. The taste intensive was positively correlated with the quantity of essential oils, the taste sweet was positively correlated with the content of total sugars. It was possible to differentiate the carrots from each other by chemo-sensorial headspace analyses according to their N-fertilization levels.     

Radioimmunoscintigraphy with In-111-labeled capromab pendetide predicts prostate cancer response to salvage radiotherapy after failed radical prostatectomy

PURPOSE: We investigated the ability of In-111-capromab pendetide to separate patients who have failed radical prostatectomy into categories of those who would versus those who would not respond to salvage radiotherapy. METHODS: Prostate-specific antigen (PSA) levels in 32 men with prostate cancer who had failed radical prostatectomy and had undergone a whole-body In-111-capromab pendetide scan were followed-up for 13 months (median) after salvage radiotherapy to the pelvis. A logistic regression model was used to determine whether the scan findings, as well as other clinical variables, were associated with a durable complete response (DCR), a nondurable response (NDR), or no response (NR). RESULTS: Sixteen of 23 (70%) men with a normal scan outside the prostatic fossa achieved a DCR after salvage radiotherapy versus two of nine (22%) who had a positive scan outside the prostate fossa and pelvis (P = .0225, Fisher's exact test). Predicted probability (95% confidence interval [CI]) that a DCR would be obtained with a normal scan was 0.88 (0.55 to 0.98); for men with a positive scan limited to the prostatic fossa it was 0.62 (0.42 to 0.79); and for men with a positive scan outside the pelvis it was 0.27 (0.09 to 0.58). No other variables before radiotherapy showed a significant association with the DCR rate. CONCLUSION: Salvage radiotherapy is statistically more likely to lead to a durable complete PSA response in men with prostate cancer who have failed radical prostatectomy and have a negative In-111-capromab pendetide scan outside the pelvis as compared with those who have a positive scan.     

In search of a dose-response relationship with radiotherapy in the management of recurrent rectal carcinoma in the pelvis: a systematic review

BACKGROUND: Research on the subject of insight has been hampered by difficulties in definition and reliable measurement. METHODS: We compared several rating scales to measure insight on a group of 33 psychotic patients as well as assessing patients' psychopathology, clinical characteristics and cognitive functioning. RESULTS: Most currently used scales showed a high degree of inter-correlation. Measures of insight related strongly to the presence of delusions; grandiosity (inversely), and depression (positively). Higher insight scores correlated with indices of treatment compliance and inversely with substance abuse. Measures of pre-morbid IQ and impaired executive functioning, including the Wisconsin Card Sorting Test were not associated with poor insight. CONCLUSIONS: The study highlights aspects of psychopathology and clinical variables particularly related to insight and supports the continued use of standardized scales in further research in this area.     

Z/I and A-band lattice spacings in frog skeletal muscle: effects of contraction and osmolarity

A-band and Z-line/I-band lattice spacings were measured by small-angle X-ray diffraction from relaxed and isometrically-contracting whole frog sartorius muscles with lattice spacings reduced or swollen by changing the osmolarity of the bathing solution. A-band spacing increased by approximately 3% upon isometric contraction at reduced lattice spacings (245-356 mOsm) and decreased by approximately 1% at swollen spacings (172 mOsm), similarly to the behaviour of skinned muscles upon changing from the relaxed state to rigor. The Z/I lattice underwent a significant lattice expansion (3-8%) upon isometric contraction at all osmolarities, in qualitative agreement (but quantitative disagreement) with results from electron microscopy on mammalian skeletal muscle. Lattice areas calculated for the Z/I and A-band lattices indicate a barrel-shaped sarcomere in the resting state, which may provide a partial explanation for how longitudinal forces produced in the A-band can produce a radial expansive force in the Z-line during contraction. The radial component of cross-bridge stiffness was calculated from the A-band data for contracting muscle, using a lattice stability model incorporating structural, osmotic and electrostatic forces. The calculations gave a radial cross-bridge stiffness during contraction of about 9 x 10(5) N m-2, and outward radial force per thick filament in normal Ringer's solution of 6 x 10(-9) N, corresponding to a radial force per cross-bridge of 10(-11) N.