Design of near-field holographic optical elements by grating matching

A new method for designing holographic optical elements is presented. The method is based on matching the grating-spacing profile of the recording light interference pattern to the desired grating-spacing profile. We show that for designing near-field holograms, in which the optical images involved are close to the hologram aperture, the grating-matching technique is superior to the well-established aberration-balancing method introduced by Latta [Appl. Opt. 10, 609 (1971)].     

Multidimensional data modeling for location-based services

With the recent and continuing advances in areas such as wireless communications and positioning technologies, mobile, location-based services are becoming possible.Such services deliver location-dependent content to their users. More specifically, these services may capture the movements and requests of their users in multidimensional databases, i.e., data warehouses, and content delivery may be based on the results of complex queries on these data warehouses. Such queries aggregate detailed data in order to find useful patterns, e.g., in the interaction of a particular user with the services.The application of multidimensional technology in this context poses a range of new challenges. The specific challenge addressed here concerns the provision of an appropriate multidimensional data model. In particular, the paper extends an existing multidimensional data model and algebraic query language to accommodate spatial values that exhibit partial containment relationships instead of the total containment relationships normally assumed in multidimensional data models. Partial containment introduces imprecision in aggregation paths. The paper proposes a method for evaluating the imprecision of such paths. The paper also offers transformations of dimension hierarchies with partial containment relationships to simple hierarchies, to which existing precomputation techniques are applicable.Received: 28 September 2002, Accepted: 5 April 2003, Published online: 12 August 2003Edited by: J. Veijalainen Correspondence to: I. Timko     

Surface chemical heterogeneity of bacteriogenic iron oxides from a subterranean environment

This study quantifies the surface chemical heterogeneity of bacteriogenic iron oxides (BIOS) and its end-members (2-line ferrihydrite and intermixed intact and fragmented bacteria). On a dry weight basis, BIOS consisted of 64.5 +/- 1.8% ferrihydrite and 34.5 +/- 1.8% organic matter. Enrichment of Al, Cu, Cr, Mn, Sr, and Zn was shown in the solid versus the aqueous phase (1.9 < log Kd < 4.2). Within the solid-phase Al (69.5%), Cu (78.7%), and Zn (77.9%) were associated with the bacteria, whereas Cr (59.8%), Mn (99.8%), and Sr (79.4%) preferred ferrihydrite. Acid-base titration data from the BIOS and bacteria were fitted using FOCUS pKa spectroscopy. The bacteria spectrum with pKa's of 4.18 +/- 0.37, 4.80 +/- 0.54, 6.98 +/- 0.45, and 9.75 +/- 0.68 was similar to discrete and continuous spectra for intact and fragmented bacteria. The BIOS spectrum recorded pKa's of 4.27 +/- 0.51, 6.61 +/- 0.51, 7.89 +/- 1.10, and 9.65 +/- 0.66 and was deconvoluted to remove overlapping binding site contributions from the bacteria. The resulting residual iron oxide spectrum coincided with discrete MUSIC spectra for goethite and lepidocrocite with pKa values of 4.10 +/- 0.43, 6.53 +/- 0.45, 7.81 +/- 0.76, and 9.51 +/- 0.68. Surface site density analysis showed that acidic sites (pKa < 6) were contributed by the bacteria (37%), whereas neutral sites (6 < pKa < 8) were characteristic of the iron oxide fraction (35%). Basic sites (8 < pKa) were higher in the bacteria (57%), than in the BIOS (44%) or iron oxide fractions (47%). This analysis suggested a high degree of bacterial group masking and a similarity between the BIOS and goethite surface reactivity. An understanding of the BIOS surface chemical heterogeneity and inherent proton and metal binding capacity was obtained through the use of FOCUS apparent pKa spectroscopy.     

Influence of aeration on hydrophobic organic contaminant distribution and diffusive flux in estuarine sediments

Dredging operations, resuspension events during storms, and bioturbation alter the oxic state of estuarine sediments and induce changes in the composition of dissolved and particle-associated natural organic matter. These changes may alter the distribution of hydrophobic organic chemicals (HOCs) in sediments and their diffusive flux across the sediment-water interface. In this study, the impact of aerating anoxic sediments on the distribution and diffusive flux of a model HOC, 2,2',4,4'-tetrachlorobiphenyl (TeCB), was investigated. Anoxic estuarine sediments collected from three sites along a salinity gradient were used to determine site-specific apparent sorption coefficients for porewater dissolved organic carbon (Kpwdoc) and sediment organic carbon (Koc) under anoxic and oxic conditions. A two-compartment sediment flux model was employed to examine the diffusive flux of TeCB under both oxic states. Aeration of anoxic porewaters resulted in significant decreases in porewater dissolved organic matter (DOMpw) aromaticity as indicated by declines in molar absorptivity at 254 nm (p < 0.005). Aeration also resulted in a 9-13% decrease in DOMpw concentration (p < 0.005) at the two sites exhibiting lower ionic strengths; the high ionic strength site did not exhibit a significant change in DOMpw concentration (p > 0.10). The impact of aeration on TeCB distribution and diffusive flux appeared to be site-specific. Aeration of anoxic sediments induced a significant 1.4 log unit reduction in Kpwdoc at the lowest ionic strength site (p < 0.0005), while sediments from the intermediate ionic strength site exhibited a significant 0.6 log unit increase (p < 0.005). No significant change in sorption to DOMpw was observed for the high ionic strength site (p > 0.10). The sediment displaying the drop in Kpwdoc also exhibited a significant 0.4 log unit drop in Koc (p < 0.01), while the other two sites did not exhibit significant aeration-induced changes in sorption to particle-associated organic matter (p > 0.10). No significant change in diffusive flux was observed for two sites (p > 0.10), while a significant 89-110 mg m(-2) yr(-1) increase in diffusive flux was observed at the low ionic strength site (p < 0.10). This latter result represented approximately a doubling in diffusive flux. In the systems studied, facilitation of TeCB transport across the sediment-water interface by organic colloids did not appear important.     

On simultaneous shape and orientational design for eigenfrequency optimization

Plates with an internal hole of fixed area are designed in order to maximize the performance with respect to eigenfrequencies. The optimization is performed by simultaneous shape, material, and orientational design. The shape of the hole is designed, and the material design is the design of an orthotropic material that can be considered as a fiber-net within each finite element. This fiber-net is optimally oriented in the individual elements of the finite element discretization. The optimizations are performed using the finite element method for analysis, and the optimization approach is a two-step method. In the first step, we find the best design on the basis of a recursive optimization procedure based on optimality criteria. In the second step, mathematical programming and sensitivity analysis are applied to find the final optimized design.     

Learning Paths to Offshore Outsourcing: From Cost Reduction to Knowledge Seeking

A corporation's offshore outsourcing may be seen as the result of a discrete, strategic decision taken in response to an increasing pressure from worldwide competition. However, empirical evidence of a representative cross-sector sample of international Danish firms indicates that offshore sourcing in low-cost countries is best described as a learning-by-doing process in which the offshore outsourcing of a corporation goes through a sequence of stages towards sourcing for innovation. Initially, a corporation's outsourcing is driven by a desire for cost minimization. Over a period of time the outsourcing experience lessens the cognitive limitations of decision-makers as to the advantages that can be achieved through outsourcing in low-cost countries: the insourcer/vendor may not only offer cost advantages, but also quality improvement and innovation. The quality improvements that offshore outsourcing may bring about evoke a realization in the corporation that even innovative processes can be outsourced.