Local effects in the vicinity of inserts in sandwich panels

The paper considers local bending effects induced in the vicinity of inserts in sandwich panels. Such local bending effects are associated with an increase of bending stresses in the sandwich faces and normal and shear stresses in the sandwich core. An earlier developed analytic model [Proceedings of the Sixth International Conference on Sandwich Structures (ICSS-6) (2002) 551] is adapted for the case of a sandwich panel with circular insert, with elastic properties differing from those of the core. The locally induced stresses in the faces and core due to presence of the insert are expressed via simple analytic relations (and charts) enabling an estimation of these local stresses. Finite element analysis is employed to demonstrate the applicability of the analytic model, and a good correspondence between the numerical and the analytical data is found. A study case related to marine applications, namely a circular insert in a sandwich deck panel used for mounting of a rigging fixture, is considered, and optimization of an existing design is carried out.     

An improved model for the prediction of intra-cell buckling in CFRP sandwich panels under in-plane compressive loading

Local instability in the form of “intra-cell buckling” or “dimpling” is a well-known failure mode in honeycomb-cored sandwich panels with very thin faces. Most work reported on the subject suggests relatively simple design formulae for the estimation of the intra-cell buckling load. It is however widely known that these classical design formulae in some cases considerably underpredict the intra-cell buckling load. In this paper a series of experimental results obtained for different CFRP/honeycomb sandwich panel configurations loaded in compression are presented. The results confirm that the “classical” design formulae provide overly conservative results. During the tests the intra-cell buckling patterns were monitored carefully, and it was observed that the hitherto assumed buckling patterns did not correspond to the experimental observations. Based on these findings a new simplified design formula is suggested, which for the investigated CFRP/honeycomb sandwich panels provides significantly more accurate predictions than the “classical” design formulae.     

Consumption of fish from a contaminated lake strongly affects the concentrations of polybrominated diphenyl ethers and hexabromocyclododecane in serum

Very high concentrations of polybrominated diphenyl ethers (PBDE) have been reported in fish from Lake Mj?sa in Norway. This study was performed to examine the serum concentrations of PBDE and hexabromocyclododecane (HBCD) in consumers of fish from this lake and to investigate possible relationships between serum concentrations, self-reported fish intake and calculated total dietary PBDE exposure. Serum concentrations of the sum of the seven PBDE (BDE-28, 47, 99, 100, 153, 154 and 183) were significantly higher than those of a reference group of Norwegians eating only food with background levels of contamination (medians: 18 ng/g lipids men, 8.4 ng/g lipids women). The median dietary intake of Sum 7 PBDE was 2549 ng/day (30 ng/kg body weight/day), the highest dietary intake of PBDE reported. The contribution from fish caught from the contaminated lake comprised 98.7% of the total dietary exposure. For men, serum levels of PBDE were strongly correlated with the calculated dietary exposure, except for BDE-209. This suggests that sources other than the diet are important for human BDE-209 exposure. The median serum HBCD concentration was 4.1 and 2.6 ng/g lipids for men and women, respectively, and was also found to be associated with consumption of fish from Lake Mj?sa.     

Quorum sensing in Escherichia coli, Salmonella typhimurium, and Vibrio harveyi: a new family of genes responsible for autoinducer production

In bacteria, the regulation of gene expression in response to changes in cell density is called quorum sensing. Quorum-sensing bacteria produce, release, and respond to hormone-like molecules (autoinducers) that accumulate in the external environment as the cell population grows. In the marine bacterium Vibrio harveyi two parallel quorum-sensing systems exist, and each is composed of a sensor-autoinducer pair. V. harveyi reporter strains capable of detecting only autoinducer 1 (AI-1) or autoinducer 2 (AI-2) have been constructed and used to show that many species of bacteria, including Escherichia coli MG1655, E. coli O157:H7, Salmonella typhimurium 14028, and S. typhimurium LT2 produce autoinducers similar or identical to the V. harveyi system 2 autoinducer AI-2. However, the domesticated laboratory strain E. coli DH5alpha does not produce this signal molecule. Here we report the identification and analysis of the gene responsible for AI-2 production in V. harveyi, S. typhimurium, and E. coli. The genes, which we have named luxSV.h., luxSS.t., and luxSE.c. respectively, are highly homologous to one another but not to any other identified gene. E. coli DH5alpha can be complemented to AI-2 production by the introduction of the luxS gene from V. harveyi or E. coli O157:H7. Analysis of the E. coli DH5alpha luxSE.c. gene shows that it contains a frameshift mutation resulting in premature truncation of the LuxSE.c. protein. Our results indicate that the luxS genes define a new family of autoinducer-production genes.     

Thermal Expansion of Alkaline‐Doped Lanthanum Ferrite Near the Néel Temperature

The thermal expansion and magnetic behaviors of divalent, alkaline‐doped lanthanum ferrites (La_0.9M_0.1FeO₃, M=Ca, Sr, Ba) were assessed using a combination of dilatometry, magnetometry, time‐of‐flight neutron diffraction, and high‐temperature X‐ray diffraction. Néel temperatures were determined through vibrating sample magnetometry and correlated well with changes in thermal expansion behavior observed during both dilatometry and X‐ray diffraction. The Néel temperatures observed for pure, Ca‐doped, Sr‐doped, and Ba‐doped lanthanum ferrites were 471°C, 351°C, 465°C, and 466°C, respectively. The effect of divalent substitutions on the magnetic behavior are attributed to charge compensation mechanisms and structural changes in the material.     

High average power, high repetition rate, picosecond pulsed fiber master oscillator power amplifier source seeded by a gain-switched laser diode at 1060 nm

We demonstrate a pulsed ytterbium-doped fiber master-oscillator power amplifier source at 1060 nm producing over 300 W of average power in 20-ps pulses at 1-GHz repetition rate. The pulses generated by a gain-switched diode were compressed by a chirped fiber Bragg grating and amplified without any distortion with excellent spectral quality. This fiber master oscillator power amplifier system offers versatility and potential for further power scaling.     

On the free vibration of sandwich panels with a transversely flexible and temperature-dependent core material – Part I: Mathematical formulation

The free vibration analysis of sandwich panels with a core that is flexible and compliant in the vertical direction and with temperature-dependent mechanical properties is presented in two parts. The first part presents the mathematical formulation while the second deals numerically with the effects of the degrading properties of the core on the free vibration response. The analysis is based on the high-order sandwich panel theory approach (HSAPT), and the equations of motions along with the appropriate boundary conditions are derived using the Hamilton’s principle. The study investigates the role of increasing temperature, through the degradation of the mechanical properties of the core, on the free vibration response of structural sandwich panels. The mathematical formulation uses two types of computational models. At first, following the HSAPT approach, the unknowns include the displacements of the face sheets as well as the shear stress in the core. Secondly, it is assumed that the through-thickness distributions of the vertical and horizontal core displacements can be represented as polynomials, following the results of the HSAPT static case, and the effect of the variable mechanical properties are implemented directly.     

Triaxial MEMS accelerometer with screen printed PZT thick film

Piezoelectric thick films have increasing interest due to the potential high sensitivity and actuation force for MEMS sensors and actuators. The screen printing technique is a promising deposition technique for realizing piezoelectric thick films in the thickness range from 10–100 μm. In this work integration of a screen printed piezoelectric PZT thick film with silicon MEMS technology is shown. A high bandwidth triaxial accelerometer has been designed, fabricated and characterized. The voltage sensitivity is 0.31 mV/g in the vertical direction, 0.062 mV/g in the horizontal direction and the first mode resonance frequency is 11 kHz. A Finite Element Method (FEM) model is used to validate the measured sensitivity and resonance frequency. Good agreement between the model and the measurements is seen.     

Lebenslanger Datenschutz: Anforderungen an vertrauenswürdige Infrastrukturen

Die Dynamik der Technikentwicklung in den vergangenen Jahren konfrontiert Datenschützer immer wieder aufs Neue mit Risiken für die Privatsph?re der Betroffenen — und es sieht so aus, als ob sich dies in den n?chsten Jahren und Jahrzehnten nicht ?ndern wird. Konzepte für einen lebenslangen Datenschutz erfordern ein Umdenken vom kurzatmigen Systementwurf zu langfristigen und zukunftsf?higen Planungen.     

In vivo validation of a blood vector velocity estimator with MR angiography

Conventional Doppler methods for blood velocity estimation only estimate the velocity component along the ultrasound beam direction. This implies that a Doppler angle under examination close to 90° results in unreliable information about the true blood direction and blood velocity. The novel method transverse oscillation (TO), which combines estimates of the axial and the transverse velocity components in the scan plane, makes it possible to estimate the vector velocity of the blood regardless of the Doppler angle. The present study evaluates the TO method with magnetic resonance phase contrast angiography (MRA) by comparing in vivo measurements of stroke volume. Eleven healthy volunteers were included in this prospective study. From the obtained data sets recorded with the 2 modalities, vector velocity sequences were constructed and stroke volume calculated. Angle of insonation was approximately 90° for TO measurements. The correlation between the stroke volume estimated by TO and MRA was 0.91 (p < 0.01) with the equation for the line of regression: MRA = 1.1?TO-0.4. A Bland-Altman plot was additionally constructed where the mean difference was 0.2 ml with limits of agreement at ?1.4 ml and 1.9 ml. The results indicate that reliable vector velocity estimates can be obtained in vivo using the presented angle-independent 2-D vector velocity method. The TO method can be a useful alternative to conventional Doppler systems by avoiding the angle artifact, thus giving quantitative velocity information.