Investigations on the wear behaviour of the temporary PMMA-based hip Spacer-G

Total hip replacement has become one of the most successful orthopaedic procedures. However, complications due to infections may give serious problems and have devastating consequences for the hip implant. The use of a temporary three-dimensional polymethylmethacrylate (PMMA) cement spacer may be an alternative to solve infections in hip implants, improving the lives of patients awaiting reimplantation. In order to evaluate their wear behaviour, five PMMA Spacer-G femoral heads were tested against five post-mortem pelves in a hip joint simulator with bovine calf serum as lubricant. The surface of the worn spacers was characterized by scanning electron microscopy (SEM) analysis; all the samples revealed a similar morphology, showing areas characterized by different degrees of wear. Particle debris was isolated from the lubricant and PMMA particles and bone fractions were quantified. The amount of debris was found to be higher than where no-temporary prostheses were used. However, this result is acceptable since wear debris is removed by lavage irrigation when the Spacer-G is explanted. On the basis of these data, it is considered that the use of the cement Spacer-G could be a promising approach to the treatment of complicated infections of the hip joint. Therefore, Spacer-G is worthy of further research.     

The solution growth route and characterization of electrochromic tungsten oxide thin films

Electrochromic tungsten oxide thin films were prepared by using an aqueous solution of Na₂WO₄·2H₂O and dimethyl sulfate. Various techniques were used for the characterization of the films such as X-ray diffraction, cyclic voltammetry, SEM analysis and VIS-spectroscopy. The thin film durability was tested in an aqueous solution of LiClO₄ (0.1 mol/dm³) for about 7000 cycles followed by cyclic voltammetry. No significant changes in the cyclic voltammograms were found, thus proving the high durability of the films.The optical transmittance spectra of coloured and bleached states showed significant change in the transmittance, which makes these films favorable for electrochromic devices.     

Self-adaptive utility-based web session management

In the Internet, where millions of users are a click away from your site, being able to dynamically classify the workload in real time, and predict its short term behavior, is crucial for proper self-management and business efficiency. As workloads vary significantly according to current time of day, season, promotions and linking, it becomes impractical for some ecommerce sites to keep over-dimensioned infrastructures to accommodate the whole load. When server resources are exceeded, session-based admission control systems allow maintaining a high throughput in terms of properly finished sessions and QoS for a limited number of sessions; however, by denying access to excess users, the website looses potential customers.In the present study we describe the architecture of AUGURES, a system that learns to predict Web user’s intentions for visiting the site as well its resource usage. Predictions are made from information known at the time of their first request and later from navigational clicks. For this purpose we use machine learning techniques and Markov-chain models. The system uses these predictions to automatically shape QoS for the most profitable sessions, predict short-term resource needs, and dynamically provision servers according to the expected revenue and the cost to serve it. We test the AUGURES prototype on access logs from a high-traffic, online travel agency, obtaining promising results.     

A new method for evaluating the subjective image quality of photographs: dynamic reference

The Dynamic Reference (DR) method has been developed for subjective image quality experiments in which original or undistorted images are unavailable. The DR method creates reference image series from test images. Reference images are presented to observers as a slide show prior to evaluating their quality. As the observers view the set of reference images, they determine the overall variation in quality within the set of test images. This study compared the performance of the DR method to that of the standardized absolute category rating (ACR) and paired comparison (PC) methods. We measured the performance of each method in terms of time effort and discriminability. The results showed that the DR method is faster than the PC method and more accurate than the ACR method. The DR method is especially suitable for experiments that require highly accurate results in a short time.     

Catalytic Oxidation of Dichloromethane and Perchloroethylene: Laboratory and Industrial Scale Studies

Development of a reliable laboratory scale test for the design of industrial catalysts is crucial. In this article, different laboratory-scale tests were compared with an industrial scale CVOCs treatment. With dichloromethane (DCM) the laboratory scale test results corresponded well to the industrial scale oxidation results. However, the perchloroethylene (PCE) conversions measured in industry were always higher than what was achieved in the laboratory scale indicating that the industrial scale catalytic incinerator operating in transient conditions is highly beneficial in PCE oxidation. It was clearly shown that in order to design high-quality laboratory scale experiments, information on complete composition and total concentration of the emission is needed but also different types of catalytic tests need to be used depending on the industrial reactor. In addition, the catalysts’ performance in an industrial VOC abatement unit was examined as the oxidation efficiencies of DCM, PCE and other hydrocarbons (OHC) were compared after 3, 10 and 23 months of operation. After 23 months and 13,065 operating hours, no significant decrease in the activity of the catalysts was observed showing that the used noble metal catalysts are highly resistant towards these demanding conditions.     

Development of a genetic algorithm for component placement sequence optimization in printed circuit board assembly

This paper describes the development and evaluation of a custom application exploring the use of genetic algorithms (GA) to solve a component placement sequencing problem for printed circuit board (PCB) assembly. In the assembly of PCB’s, the component placement process is often the bottleneck, and the equipment to complete component placement is often the largest capital investment. The number of components placed on a PCB can range from few to hundreds. As a result, developing an application to determine an optimal or near-optimal placement sequence can translate into reduced cycle times for the overall assembly process and reduced assembly costs. A custom application was developed to evaluate the effectiveness of using GA’s to solve the component placement sequencing problem. A designed experiment was used to determine the best representation and crossover type, crossover rate, and mutation rate to use in solving a component sequencing problem for a PCB consisting of 10 components being placed on a single-headed placement machine. Three different representations (path, ordinal, and adjacency) and six appropriate crossover types (partially mapped, ordered, cycle, classical, alternating edges, and heuristic) were evaluated at three different mutation rates and at 11 crossover rates. Two algorithm response variables, the total distance traveled by the placement head and the algorithm solution efficiency (measured as number of generations and algorithm solution time) were used to evaluate the different GA applications. The combination of representation and crossover type along with mutation rate were found to be the most significant parameters in the algorithm design. In particular, path representation with order crossover was found to produce the best solution as measured by the total distance traveled as well as the solution generation efficiency. Increasing the mutation rate led to slightly improved solutions in terms of head travel, but also resulted in increased solution time.     

Flood regulation using nonlinear model predictive control

In this paper the flood problem of the river Demer, a river located in Belgium, is discussed. First a simplified model of the Demer basin is derived based on the conceptual reservoir modeling concept. This model was calibrated to simulations results with a more detailed full hydrodynamic model. Afterwards, the focus is shifted to a nonlinear model predictive controller (NMPC) which is based on a new semi-condensed optimization procedure combined with a line search approach. Finally, simulations are performed based on historical data in which the NMPC is compared with the current control strategy used by the local water administration. Uncertainties are added to the rainfall predictions in order to assess the robustness of the NMPC.     

Optical characterization of autostereoscopic 3‐D displays

Abstract— Display‐measurement methods different from conventional 2‐D display measurements are needed for verifying the optical characteristics of autostereoscopic (3‐D) displays and for comparing different 3‐D display technologies. Industry is lacking standardized measurement methods, and the reported results can not always be compared. The selected set of characteristics discussed in this paper and partly defining the quality of the 3‐D experience are crosstalk, viewing freedom, and optimum viewing distance. Also, more conventional display characteristics such as luminance are discussed, since the definitions for these characteristics in 3‐D mode usually differ from those used for the 2D displays. We have investigated how these chosen 3‐D display characteristics can be objectively measured from transmissive two‐view and multiview 3‐D displays. The scope of this article is to generally define those basic characteristics as well as the different measurement methods. Most of the 3‐D characteristics can be derived from the luminance and colors versus the viewing angle. Either a conoscopic or a goniometric measurement system can be used, as long as the angular and stray‐light properties are suitable and known. The characteristics and methods are currently discussed in the display‐quality standardization forums.     

Validating the Marschak Interaction Method Rating System with adolescent mother-child dyads.

The authors investigated the reliability and construct validity of the Marschak Interaction Method Rating System (MIMRS), a new observational scoring system for the play-based Marschak Interaction Method (MIM), particularly its ability to capture high-risk parenting in adolescent mother-child dyads. The MIMRS demonstrated high interrater reliability and high internal consistency. Convergent validity was supported by moderately negative correlations between the MIMRS and the Parenting Stress Index/Short Form. The MIMRS demonstrated good contrasted groups validity, differentiating between 15 adolescent-child dyads and 16 adult- child comparison dyads, even after adjustment for differences in children's age. These results suggest that the MIMRS has the potential be a valuable rating system for research and practice with the MIM, as well as understanding and assessing parent-child relationships. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Guest Editorial

The extreme high speed of change in the area of information technology creates a new demand for a process of continues learning and relearning in the workplaces but also among the public as a whole. There is need for a deeper crossdisciplinary and interdisciplinary understanding of the effects of this extreme demand for learning and relearning, both on us as individuals, on public and private organization and on the society as a whole. Information technology provides to some extent possible solutions to the problems it creates. Consequently, web based learning is also expanding with an accelerating speed. But this new form of learning is not to the same extent backed up by a fast growing research, in areas like on-the job-learning, workplace pedagogics, 'competence ergonomics', etc. But there are a number of very good exceptions like the Knowledge Media Institute of the Open University, and also a number of newly established facilities like the network university in the north of Sweden, the Mid Sweden University. In this special issue these types of problems are discussed, including those where the emphasis lies in creating rational and effective methods for web-based training and learning. The following was put forward in the invitation to a particular target group for this special issue.