Z/I and A-band lattice spacings in frog skeletal muscle: effects of contraction and osmolarity

A-band and Z-line/I-band lattice spacings were measured by small-angle X-ray diffraction from relaxed and isometrically-contracting whole frog sartorius muscles with lattice spacings reduced or swollen by changing the osmolarity of the bathing solution. A-band spacing increased by approximately 3% upon isometric contraction at reduced lattice spacings (245-356 mOsm) and decreased by approximately 1% at swollen spacings (172 mOsm), similarly to the behaviour of skinned muscles upon changing from the relaxed state to rigor. The Z/I lattice underwent a significant lattice expansion (3-8%) upon isometric contraction at all osmolarities, in qualitative agreement (but quantitative disagreement) with results from electron microscopy on mammalian skeletal muscle. Lattice areas calculated for the Z/I and A-band lattices indicate a barrel-shaped sarcomere in the resting state, which may provide a partial explanation for how longitudinal forces produced in the A-band can produce a radial expansive force in the Z-line during contraction. The radial component of cross-bridge stiffness was calculated from the A-band data for contracting muscle, using a lattice stability model incorporating structural, osmotic and electrostatic forces. The calculations gave a radial cross-bridge stiffness during contraction of about 9 x 10(5) N m-2, and outward radial force per thick filament in normal Ringer's solution of 6 x 10(-9) N, corresponding to a radial force per cross-bridge of 10(-11) N.     

Novel expression and regulation of gastrin gene in human ovarian cancer cell line, SW626

Gastrin-secreting tumors have been identified in ectopic locations including the ovary; the mechanisms regulating gastrin gene expression, its distribution, and signaling pathways in these ectopic tissues are not known. The purpose of our present study was to determine: (1) whether the gastrin gene and peptide could be detected in ovarian cancer cell lines, (2) if functional gastrin releasing peptide receptors (GRP-R) are present, and (3) whether gastrin gene expression is altered by GRP. Five ovarian cancer cell lines (SW626, OVCA 420, OVCA 429, OVCA 432, and OVCA 433) were analyzed. We identified gastrin gene and peptide expression in the SW626 cell line but not in the OVCA lines. SW626 cells express a functional GRP-R that is correctly coupled to the Ca2+ signaling pathway. Treatment of SW626 cells with bombesin, the amphibian equivalent of GRP, inhibited expression of the gastrin gene in a time- and dose-dependent fashion. The SW626 ovarian cancer cell line will provide a useful model to further define regulation and expression of both the gastrin gene and peptide in ectopic (nongastrointestinal) tissues.     

County funding of mental health services in a rural state

A case of lobar torsion after lung surgery is reported here. She developed a right middle lobar torsion diagnosed by postoperative bronchial fiberscopy, suggesting incomplete obstruction of the intermedial bronchus. Re-operation was performed successfully either by fixing the right lower lobe to both the middle lobe and the thoracic wall. Careful postoperative observation with chest radiography, bronchial fiberscopy, are important for precise diagnosis of and therapy for lobar torsion following pulmonary lobectomy.     

Dynamics and organization of MAP kinase signal pathways

In the budding yeast, Saccharomyces cerevisiae, four separate but structurally related mitogen-activated protein kinase (MAPK) activation pathways are known. The best understood of these regulates mating. Pheromone binding to receptor informs cells of the proximity of a mating partner and induces differentiation to a mating competent state. The MAPK activation cascade mediating this signal is made up of Ste11 (a MEK kinase [MEKK]), Ste7 (a MAPK/ERK kinase [MEK]), and the redundant MAPK-related Fus3 and Kss1 enzymes. Another MAPK activation pathway is important for cell integrity and regulates cell wall construction. This cascade consists of Bck1 (a MEKK), the redundant Mkk1 and Mkk2 enzymes (MEKs), and Mpk1 (a MAPK). We exploited these two pathways to learn about the coordination and signal transmission fidelity of MAPK activation cascades. Two lines of evidence suggest that the activities of the mating and cell integrity pathways are coordinated during mating differentiation. First, cells deficient in Mpk1 are susceptible to lysis when they make a mating projection in response to pheromone. Second, Mpk1 activation during pheromone induction coincides with projection formation. The mechanism underlying this coordination is still unknown to us. Our working model is that projection formation generates a mobile second messenger for activation of the cell integrity pathway. Analysis of a STE7 mutation gave us some unanticipated but important insights into parameters important for fidelity of signal transmission. The Ste7 variant has a serine to proline substitution at position 368. Ste7-P368 has higher basal activity than the wild-type enzyme but still requires Ste11 for its function. Additionally, the proline substitution enables the variant to transmit the signal from mammalian Raf expressed in yeast. This novel activity suggests that Ste7-P368 is inherently more permissive than Ste7 in its interactions with MEKKs. Yet, Ste7-P368 cross function in the cell integrity pathway occurs only when it is highly overproduced or when Ste5 is missing. This behavior suggests that Ste5, which has been proposed to be a tether for the kinases in the mating pathway, contributes to Ste7 specificity and fidelity of signal transmission.     

An evaluation of the effectiveness of adaptive histogram equalization for contrast enhancement

Adaptive histogram equalization (AHE) and intensity windowing have been compared using psychophysical observer studies. Experienced radiologists were shown clinical CT (computerized tomographic) images of the chest. Into some of the images, appropriate artificial lesions were introduced; the physicians were then shown the images processed with both AHE and intensity windowing. They were asked to assess the probability that a given image contained the artificial lesion, and their accuracy was measured. The results of these experiments show that for this particular diagnostic task, there was no significant difference in the ability of the two methods to depict luminance contrast; thus, further evaluation of AHE using controlled clinical trials is indicated.     

Precision Oncology via NMR-Based Metabolomics: A Review on Breast Cancer

Precision oncology is an emerging approach in cancer care. It aims at selecting the optimal therapy for the right patient by considering each patient’s unique disease and individual health status. In the last years, it has become evident that breast cancer is an extremely heterogeneous disease, and therefore, patients need to be appropriately stratified to maximize survival and quality of life. Gene-expression tools have already positively assisted clinical decision making by estimating the risk of recurrence and the potential benefit from adjuvant chemotherapy. However, these approaches need refinement to further reduce the proportion of patients potentially exposed to unnecessary chemotherapy. Nuclear magnetic resonance (NMR) metabolomics has demonstrated to be an optimal approach for cancer research and has provided significant results in BC, in particular for prognostic and stratification purposes. In this review, we give an update on the status of NMR-based metabolomic studies for the biochemical characterization and stratification of breast cancer patients using different biospecimens (breast tissue, blood serum/plasma, and urine).     

Effect of deposition conditions on the properties and annealing behavior of cold-sprayed copper

The deposition of copper by cold gas dynamic spraying has attracted much interest in recent years due to the capability to deposit low-porosity oxide-free coatings. However, it is generally found that as-deposited copper has a signicantly greater hardness, and potentially lower ductility, than bulk material. In this article, copper was deposited by cold spraying using helium as the driving gas at both 298 and 523 K. Evidence is presented indicating that the material sprayed at the lower temperature exhibits a lower dislocation density throughout the grain structure than the material sprayed at the higher temperature. The low stacking fault energy of copper restricts recovery during annealing, and thus microstructural changes during annealing only proceed once recrystallization begins. The material sprayed at low temperature (with the low dislocation density) exhibited recrystallization at annealing temperatures as low as 373 K with a corresponding reduction in hardness. However, the copper sprayed with helium at 523 K was resistant to annealing at temperatures up to 473 K where the dislocations in the structure prevented recrystallization. However, at higher temperatures, recrystallization did proceed (with corresponding reductions in hardness). The fracture behavior of the copper that was cold sprayed with helium at 523 K, both in the as-sprayed condition and following annealing, was measured and explained in terms of the annealing mechanisms proposed. The original version of this paper was published in the CD ROM Thermal Spray Connects: Explore Its Surfacing Potential, International Thermal Spray Conference, sponsored by DVS, ASM International, and HW International Institute of Welding, Basel, Switzerland, May 2–4, 2005, DVS-Verlag GmbH, Düsseldorf, Germany.     

A model to predict the evolution of pitting corrosion and the pit-to-crack transition incorporating statistically distributed input parameters

A model based on deterministic equations with statistically distributed input parameters has been developed for simulating the evolution of the pit depth distribution at different exposure times and the percentage of pits that transform to stress corrosion cracks. The model has been applied to the specific case of steam turbine disc steel exposed to a range of environments under applied stress. With preliminary fitting at one exposure time, the simulation not only reflects the trends in the experimental measurement but also the model, uniquely, reproduces the statistical variability or “noise” associated with the measurements.