Investigation of mechanical properties of unidirectional steel fiber/polyester composites: Experiments and micromechanical predictions

The article introduces steel fiber reinforced polymer composites, which is considered new for composite product developments. These composites consist of steel fibers or filaments of 0.21 mm diameter embedded in a polyester resin. The goal of this investigation is to characterize the mechanical performance of steel fiber reinforced polyester composites at room temperature. The mechanical properties of unidirectional steel fiber reinforced polyester composites (SFRP) are evaluated experimentally and compared with the predicted values by micro‐mechanical models. These predictions help to understand the role of material and process parameters on material properties. Two types of SFRP were studied: polyester resin reinforced by both steel fabric containing unidirectional fibers and steel fibers wound on a metal frame with 0° orientations. The effects of the fiber volume fraction and the role of polymer yarns (weft) on mechanical properties were analyzed through tensile, compressive, and shear tests. These tests were performed as per the standard test procedures. In particular, issues related to processing difficulties, polymer yarns effect on properties, standardized testing, and properties under various loading conditions were addressed. Microscopic observations were analyzed to assess the laminate quality and the macroscopic fracture surfaces of shear test specimens were studied by standard techniques. POLYM. COMPOS., 37:627–644, 2016. © 2014 Society of Plastics Engineers     

Functionally Graded Ceramics Fabricated with Side‐by‐Side Tape Casting for Use in Magnetic Refrigeration

Functionally graded ceramic tapes have been fabricated by a side‐by‐side tape casting technique. This study shows the possibility and describes the main principles of adjacent coflow of slurries resulting in formation of thin plates of graded ceramic material. Results showed that the small variations of solvent and binder system concentrations have a substantial effect on slurry viscosity. Varying these parameters showed that side‐by‐side tape casting with a well‐defined interface area is possible for slurries with viscosities above 3500 mPa s at a casting shear rate of 3.3 s^?1. As it was expected, the choice of de‐bindering and sintering regimes significantly influences crack formation, and a three‐step heating programme was found to result in tapes of the highest quality. The interface regions of green graded tapes were investigated structurally by scanning electron microscopy; for a distinct identification of the interface region and analysing the degree of cross‐interface diffusion, the isothermal entropy change was measured by a vibrating sample magnetometer as the magnetic transition temperature (Curie temperature) is very sensitive to the dopant level in ceramics. Also the purpose of developing this graded ceramic tape casting was applications of these specific magnetocaloric properties within the magnetic refrigeration technology.     

Multiphoton imaging with a novel compact diode‐pumped Ti:sapphire oscillator

Multiphoton laser scanning microscopy commonly relies on bulky and expensive femtosecond lasers. We integrated a novel minimal‐footprint Ti:sapphire oscillator, pumped by a frequency‐doubled distributed Bragg reflector tapered diode laser, into a clinical multiphoton tomograph and evaluated its imaging capability using different biological samples, i.e. cell monolayers, corneal tissue, and human skin. With the novel laser, the realization of very compact Ti:sapphire‐based systems for high‐quality multiphoton imaging at a significantly size and weight compared to current systems will become possible. Microsc. Res. Tech. 78:1154–1158, 2015. © 2015 Wiley Periodicals, Inc.     

Mastitis and the shape of the lactation curve in Norwegian dairy cows

An investigation of the shape of the lactation curve and the mastitis incidence was conducted to identify whether management interventions of the lactation curve constitute a potential for reducing incidence of mastitis at herd level. Lactation curves were estimated to describe the variation of daily milk yield during the 305-d lactation period in Norwegian Red cows. Associations between mastitis incidence at herd level and lactation curve characteristics such as production level at onset of lactation, magnitude and time of peak milk yield, and increase and decrease of milk yield rates were studied. Data from 250,303 lactations occurring during 2005 and 2006 from 14,766 herds were obtained from the Norwegian Dairy Herd Recording System. Besides veterinary treatments, the records included information on monthly test-day milk yields. The shapes of the lactation curves at herd level were parameterized using a modified Wilmink model in two separate mixed model analyses. In the first analysis a subset of lactations with no records of veterinary treatments was used. Lactation curves from herds with high (>0·31 cases/305-d lactation) and low (<0·07 cases/305-d lactation) herd mastitis incidence rate were parameterized and compared for three separate strata of parity. The result showed that high herd mastitis incidence rate was associated with a low intercept (P<0·05), a steep slope before peak milk yield (P<0·01) and a rapid decline after peak milk yield (P<0·01). In the second analysis a subset of high-yielding lactations with veterinary treatments of mastitis only and lactations with no records of veterinary treatment were compared. This was done to investigate whether the findings at herd level were also reflected at cow level. These results showed that lactation curves from lactations with mastitis cases were associated with a steep slope before peak milk yield (P<0·05) in second and later parities and a rapid decline after peak milk yield (P<0·01) in all three parity groups.     

Freshness Assessment of Thawed and Chilled Cod Fillets Packed in Modified Atmosphere Using Near-infrared Spectroscopy

Near-infrared reflectance (NIR) spectra was recorded of 105 samples of cod mince prepared from chill stored thawed cod fillets of varying quality in modified atmosphere packaging (MAP). Traditional chemical, physical, microbiological and sensory quality methods developed for assessing fresh fish products were determined on the same cod fillets. The purpose was to evaluate the potential of NIR spectroscopy for estimating (i) frozen storage temperature, (ii) frozen storage period and (iii) chill storage period of thawed-chilled MAP Barents Sea cod fillets. Furthermore, the potential for measuring of selected quality attributes as drip loss, water holding capacity and content of dimethylamine by NIR was evaluated. The results of the investigation were presented using multivariate modelling methods such as partial least-squares regression (PLSR) and discriminant partial least-squares regression (DPLSR). Systematic differences in the NIR measurements on minced cod fillets were primarily due to the chill storage duration (days at 2°C) on thawed-chilled MAP fillets. PLSR models based on wavelengths selected by a new Jack-knife method resulted in a correlation coefficient of 0.90 between measured and predicted duration of chill storage period (days at 2°C). The root-mean-square error of cross-validation (RMSECV) was 3.4 d at 2°C. NIR measurements provided promising results for evaluation of freshness for thawed-chilled MAP cod fillets completing the traditionally quality methods. However, it is necessary to study the effect of e.g. sample preparation, season, fishing ground and cod size together with more sophisticated pre-treatments of NIR spectra before the NIR method can be integrated as a method for evaluation of thawed-chilled MAP cod fillets.     

Water distribution and mobility in meat during the conversion of muscle to meat and ageing and the impacts on fresh meat quality attributes--a review

This paper reviews current knowledge on the distribution and mobility of water in muscle (myowater) ante- and post mortem and factors affecting these in relation to fresh meat quality parameters; water-holding capacity (WHC), tenderness and juiciness. NMR transverse relaxometry (T(2)) using bench-top Low-Field Nuclear Magnetic Resonance (LF-NMR) has characterised myowater distribution and mobility as well as structural features in meat which directly affect WHC. The current literature demonstrates that WHC is correlated to the water located outside the myofibrillar network (extra-myofibrillar). This review identifies the critical stages which affect the translocation of water into the extra-myofibrillar space and thus the potential for decreased WHC during proteolysis (the conversion of muscle to meat). This review discusses how the intrinsic properties of the water held within the meat could contribute to juiciness and tenderness. Tenderness has been shown to correlate to T(2), however breed and species differences made it difficult to draw firm conclusions. Further understanding of the inherent water properties of fresh meat and the factors affecting water distribution and mobility using NMR technologies will increase the understanding of WHC and tenderisation of fresh meat.     

Farmers' choice of medical treatment of mastitis in Danish dairy herds based on qualitative research interviews

A qualitative research study was conducted to describe and analyze farmers' perspectives on their own choices regarding decisions to have cows treated for mastitis. Through qualitative research interviews of 16 Danish dairy farmers, four levels of the decision-making process used by farmers to decide whether or not to treat a cow with antibiotics were identified. Those levels were: 1) symptom level (seriousness of the mastitis case), 2) cow level (to the extent a cow fulfilled goals of the farmer and the herd), 3) herd level (the situation of the herd, e.g., in relation to milk quota), and 4) level of alternatives (whether the farmer regards such practices as blinding of teats or homoeopathy as serious alternatives to antibiotic treatment). All four levels could be recognized in all herds, but with differing weights and relative importance across herds. Directions of different possibilities within each level also varied among farmers. By identifying those four levels, a model for understanding the farmers' choices is provided. This provides background for dialogue with each farmer about choices in the context of each specific herd. It also provides insight into implications of mastitis treatments for effective treatment versus issues of antibiotic resistance when discussing choices on a more general level. Communication and understanding between farmers and their veterinarians and cattle-oriented advisors is essential. Farmers were shown to be coherent in their choices of treatment, but their decisions often seemed to differ from normal veterinary recommendations. Such differences have to be understood and implemented into effective decisions for the whole farm.     

Political attitudes and cognitive convictions among Danish social science researchers

Interview data from a survey among Danish researchers, mainly from social sciences (all disciplines, about on third of all) are used to examine connections between researcher political attitudes and their disciplinary cognitive paradigms. Included are researchers’ convictions concerning world view hypotheses, their basic assumptions regarding the subject matter in their fields of study, e.g., individuals, social action, and society as a whole, and their epistemic ideals and goals. Political attitude is indicated by researchers’ voting in the 1994 general election of the Danish Parliament. The results show big differences between social science disciplines regarding voting pattern. The analysis also clearly demonstrates connections between disciplinary cognitive convictions and political attitudes. The connections are interpreted as expressions of hermeneutic, historical links between political discourse formations and disciplinary paradigms.     

Resolving crises through automated bilateral negotiations

We describe the development of an automated agent that can negotiate efficiently with people in crises. The environment is characterized by two negotiators, time constraints, deadlines, full information, and the possibility of opting out. The agent can play either role, with communications via a pre-defined language. The model used in constructing the agent is based on a formal analysis of the crises scenario using game-theoretic methods and heuristics for bargaining. The agent receives messages sent by its opponent, analyzes them and responds. It also initiates discussion on one or more parameters of an agreement. Experimental results of simulations of a fishing dispute between Canada and Spain indicate that the agent played at least as well as, and in the case of Spain, significantly better than a human player.     

User profiling and virtual agents: a case study on e-commerce services

The main contribution of this work is the design of an application framework based on both conversational agents and user profiling technologies for the development of e-commerce services. User profiles are exploited by conversational agents to help customers in retrieving potentially interesting products from a catalogue. Three techniques were used for collecting data for a usability test: eye-movement tracking, questionnaire, and recording the user-system dialogue. The main outcomes of the experimental sessions are: (1) the dialogue capabilities of the agent facilitate the interaction between the user and the e-commerce site; and, (2) user profiles improve the retrieval capabilities of the agent. Finally, some limitations of the user profiling techniques adopted in the framework are discussed and a more sophisticated content-based profiling technique is proposed.