Using a phenomenological computer model to investigate advanced combustion trajectories in a CIDI engine

This paper summarizes results from simulations of conventional, high-dilution, and high-efficiency clean combustion in a diesel engine based on a two-zone phenomenological model. The two-zone combustion model is derived from a previously published multi-zone model, but it has been further simplified to increase computational speed by a factor of over 100. The results demonstrate that this simplified model is still able to track key aspects of the combustion trajectory responsible for NO_x and soot production. In particular, the two-zone model in combination with highly simplified global kinetics correctly predicts the importance of including oxygen mass fraction (in addition to equivalence ratio and temperature) in lowering emissions from high-efficiency clean combustion. The methodology also provides a convenient framework for extracting information directly from in-cylinder pressure measurements. This feature is likely to be useful for on-board combustion diagnostics and controls. Because of the possibility for simulating large numbers of engine cycles in a short time, models of this type can provide insight into multi-cycle and transient combustion behavior not readily accessible to more computationally intensive models. Also the representation of the combustion trajectory in 3D space corresponding to equivalence ratio, flame temperature, and oxygen fraction provides new insight into optimal combustion management.     

Replacing fossil oil with fresh oil – with what and for what?

Industrial chemicals and materials are currently derived mainly from fossil‐based raw materials, which are declining in availability, increasing in price and are a major source of undesirable greenhouse gas emissions. Plant oils have the potential to provide functionally equivalent, renewable and environmentally friendly replacements for these finite fossil‐based raw materials, provided that their composition can be matched to end‐use requirements, and that they can be produced on sufficient scale to meet current and growing industrial demands. Replacement of 40% of the fossil oil used in the chemical industry with renewable plant oils, whilst ensuring that growing demand for food oils is also met, will require a trebling of global plant oil production from current levels of around 139 MT to over 400 MT annually. Realisation of this potential will rely on application of plant biotechnology to (i) tailor plant oils to have high purity (preferably >90%) of single desirable fatty acids, (ii) introduce unusual fatty acids that have specialty end‐use functionalities and (iii) increase plant oil production capacity by increased oil content in current oil crops, and conversion of other high biomass crops into oil accumulating crops. This review outlines recent progress and future challenges in each of these areas. Practical applications: The research reviewed in this paper aims to develop metabolic engineering technologies to radically increase the yield and alter the fatty acid composition of plant oils and enable the development of new and more productive oil crops that can serve as renewable sources of industrial feedstocks currently provided by non‐renewable and polluting fossil‐based resources. As a result of recent and anticipated research developments we can expect to see significant enhancements in quality and productivity of oil crops over the coming decades. This should generate the technologies needed to support increasing plant oil production into the future, hopefully of sufficient magnitude to provide a major supply of renewable plant oils for the industrial economy without encroaching on the higher priority demand for food oils. Achievement of this goal will make a significant contribution to moving to a sustainable carbon‐neutral industrial society with lower emissions of carbon dioxide to the atmosphere and reduced environmental impact as a result.     

Genomic Instability Is an Early Event in Aluminium-Induced Tumorigenesis

Genomic instability is generally considered as a hallmark of tumorigenesis and a prerequisite condition for malignant transformation. Aluminium salts are suspected environmental carcinogens that transform mammary epithelial cells in vitro through unknown mechanisms. We report here that long-term culture in the presence of aluminium chloride (AlCl₃) enables HC11 normal mouse mammary epithelial cells to form tumours and metastases when injected into the syngeneic and immunocompetent BALB/cByJ strain. We demonstrate that AlCl₃ rapidly increases chromosomal structural abnormalities in mammary epithelial cells, while we failed to detect direct modulation of specific mRNA pathways. Our observations provide evidence that clastogenic activity—a well-recognized inducer of genomic instability—might account in part for the transforming abilities of aluminium in mammary epithelial cells.     

Composition of Chemical Attractants Affects Trap Catches of the Australian Sheep Blowfly, Lucilia cuprina, and Other Blowflies

Numbers of Lucilia cuprina (Australian sheep blowfly), Chrysomya spp., and Calliphora spp. blowflies caught on sticky traps baited with various synthetic attractants or a standard liver/sodium sulfide attractant in western Queensland were recorded. Numbers of each genus collected were influenced by the composition of the chemical attractants. Attractant mixtures based on 2-mercaptoethanol, indole, butanoic/pentanoic acid, and a sodium sulfide solution gave 5- to 20-fold higher L. cuprina catches than the liver standard. These blends attracted similar numbers of Chrysomya spp. (0.85-2.7x) and fewer Calliphora spp. (0.02-0.2x) compared to the liver standard. These synthetic attractants were more effective and selective for L. cuprina than the standard liver/sodium sulfide attractant, and they can be packaged in controlled-release dispensers to generate constant, prolonged release of the attractant.     

In Vivo Delivery and Activation of Masked Fluorogenic Hydrolase Substrates by Endogenous Hydrolases in C. elegans

Protein expression and localization are often studied in vivo by tagging molecules with green fluorescent protein (GFP), yet subtle changes in protein levels are not easily detected. To develop a sensitive in vivo method to amplify fluorescence signals and allow cell‐specific quantification of protein abundance changes, we sought to apply an enzyme‐activated cellular fluorescence system in vivo by delivering ester‐masked fluorophores to Caenorhabditis elegans neurons expressing porcine liver esterase (PLE). To aid uptake into sensory neuron membranes, we synthesized two novel fluorogenic hydrolase substrates with long hydrocarbon tails. Recombinant PLE activated these fluorophores in vitro. In vivo activation occurred in sensory neurons, along with potent activation in intestinal lysosomes quantifiable by imaging and microplate and partially attributable to gut esterase 1 (GES‐1) activity. These data demonstrate the promise of biorthogonal hydrolases and their fluorogenic substrates as in vivo neuronal imaging tools and for characterizing endogenous C. elegans hydrolase substrate specificities.     

Practical applications of nondestructive materials characterization

Although nondestructive techniques have been used almost exclusively to detect macroscopic defects in structures or devices, it has become increasingly evident that it is both practical and cost-effective to expand the role of nondestructive evaluation to include all aspects of materials production. In recent years, classical nondestructive testing techniques have been augmented by more sophisticated methods for characterizing the microstructure and the associated physical and chemical properties of materials.     

Effect of Residual Surface Stress on the Strenght Distribution of Brittle Materials

The introduction of residual surface stresses into a material can change the strength distribution simply due to variability in the stress intensity factor of surface cracks. This variability arises from the distribution in surface (critical) crack lengths. A fracture mechanics approach was used to determine the influence of surface compression on the average strength and the standard deviation of the strength distribution. The strengths of the stress-free samples were assumed to fit a twoparameter Weibull distribution, and the increases in strength resulting from the surface compression were determined using fracture mechanics. It was determined from the analysis that the standard deviation/average strength ratio (coefficient of variation) initially increases, passes through a maximum, and ultimately reaches a plateau value below the initial value, as one increases the depth of surface compression. The maximum increase in the strength scatter occurs when the depth of the surface compression is approximately equal to the characteristic crack size. These changes were found to be dependent on the magnitude of the surface stress, as well as the characteristic strength, Weibull modulus, and fracture toughness of the stress-free material.     

Evaluation of Strut Strength in Open-Cell Ceramics

The strength of cellular materials is dependent on the strength of the solid making up the cellular structure, but this parameter is often difficult to quantify. In order to better evaluate these materials, a technique has been developed to measure the strength ofthe cell struts in open-cell ceramics. The strut strength was measured in two commercially available, open-cell ceramics and evaluated in terms of a two parameter Weibull distribution. The strut strength distribution was found to be very wide with the Weibull modulusin the range 1 to 3. In addition, it was found that the strut strength was invariant withdensity (at constant cell size) but could be dependent on cell size. This behavior was inqualitative agreement with the failure statistics of brittle materials, once the variations in the microstructural geometry are understood. Based on these data and the observations of flaws within the struts, it is clear that careful processing of these materials could significantly improve the strut strength distribution, in terms of reducing its width and increasing its magnitude. Such microscopic improvements would lead to similar benefits in the strength and toughness of the bulk cellular ceramics.     

Methane partial oxidation to synthesis gas over bimetallic cobalt/tungsten carbide catalysts and integration with a Mn substituted hexaaluminate combustion catalyst

Co_0.2W_0.8C_x and supported Co_0.2W_0.8C_x catalysts are shown to be active for the partial oxidation of methane to synthesis gas. The catalyst stability is improved by operating at elevated pressure, or in the presence of excess methane. At atmospheric pressure the Co_0.2W_0.8C_x catalysts deactivate by oxidation, as seen by X-ray diffraction. Manganese substituted hexaaluminate catalysts with different Mn contents have been tested as catalysts for the total combustion of methane. In particular BaMn₂Al₁₀O₁₉ is active and stable for the combustion reaction. The temperature rise observed in the reactor was up to 300 K, depending on the reaction conditions, and complete conversion of oxygen in the feed was achieved. A process for stabilising the carbide catalysts is demonstrated, combining the manganese substituted hexaaluminate total oxidation catalyst, in series before the carbide reforming catalyst: this process leads to stable operation, with no carbon formation in the reactor and no carbide catalyst oxidation observed.     

Thermal Shock Resistance of Ceramic Foams

Thermal shock behavior of a variety of open-cell ceramic foams was evaluated using infrared heating and forced air cooling. The extent of damage after thermal shock was determined by a nondestructive, dynamic resonance technique. The damage in foams was found to be strongly dependent on cell size and weakly dependent on density. In zirconia-based foams, damage was found to increase with an increase in zirconia content. A thermal stress resistance parameter R '_f was derived to predict the effect of cell size and density on the damage incurred in foams. The experimental results were found to corroborate the predictions fairly well but a better approach was to compare the maximum applied thermal strains with the degree of damage.