Methodology for studying the impact of intrinsic stress on thereliability of the electroless Ni UBM structure

A methodology for evaluating the reliability and the impact of intrinsic stresses on the electroless Ni under bump metallurgy (UBM) structure is presented. The first part of this work will address the testing methodology, which uses a pressure sensing device to determine the intrinsic stress in Ni due to the plating process. An optical method is used to capture deformation in the sensing device due to the Ni plating process. A finite element model is then used to calculate the intrinsic stress in the Ni film using the deformation output from the optical measurements. The second part of this work will address a predictive model used to determine the reliability of applying intrinsic stress values to a low cost electroless Ni UBM structure during the bump formation and solder reflow process. The combined work of the testing and predictive methodology provides a more effective and accurate method of predicting the Ni UBM reliability     

The sodium,potassium and chloride contents of some feedingstuffs used in British poultry diets

The sodium, potassium and chloride contents of feedingstuffs used in practical and purified diets are reported. The sodium contents of some cereals and cereal by products are considerably lower than those in the literature.     

Nanoscale Characterization of Energy Generation from Piezoelectric Thin Films

We report on the use of nanoindentation to characterize in situ the voltage and current generation of piezoelectric thin films. This work presents the controlled observation of nanoscale piezoelectric voltage and current generation, allowing accurate quantification and mapping of force function variations. We characterize both continuous thin films and lithographically patterned nano­islands with constrained interaction area. The influence of size on energy generation parameters is reported, demonstrating that nanoislands can exhibit more effective current generation than continuous films. This quantitative finding suggests that further research into the impact of nanoscale patterning of piezoelectric thin films may yield an improved materials platform for integrated microscale energy scavenging systems.     

Band‐Offset Engineering for Enhanced Open‐Circuit Voltage in Polymer–Oxide Hybrid Solar Cells

The power conversion efficiency of organic and hybrid solar cells is commonly reduced by a low open‐circuit voltage (V_OC). In these cases, the V_OC is significantly less than the energy of the lowest energy absorbed photon, divided by the elementary charge q. The low photovoltage originates from characteristically large band offsets between the electron donor and acceptor species. Here a simple method is reported to systematically tune the band offset in a π‐conjugated polymer–metal oxide hybrid donor–acceptor system in order to maximize the V_OC. It is demonstrated that substitution of magnesium into a zinc oxide acceptor (ZnMgO) reduces the band offset and results in a substantial increase in the V_OC of poly(3‐hexylthiophene) (P3HT)–ZnMgO planar devices. The V_OC is seen to increase from 500 mV at x = 0 up to values in excess of 900 mV for x = 0.35. A concomitant increase in overall device efficiency is seen as x is increased from 0 to 0.25, with a maximum power‐conversion efficiency of 0.5 % obtained at x = 0.25, beyond which the efficiency decreases because of increased series resistance in the device. This work provides a new tool for understanding the role of the donor–acceptor band offset in hybrid photovoltaics and for maximizing the photovoltage and power‐conversion efficiency in such devices.     

A novel wide-band tunable RF phase shifter using a variable opticaldirectional coupler

We present a novel RF phase-shifter design with a usable bandwidth of 80:1. The design is verified through demonstration of a proof of concept device, consisting of a readily available voltage variable optical coupler fabricated from LiNbO₃, combined with an fiber-optic delay line. The design is analyzed theoretically and measurement of the device confirms the predicted range of operation. Methods of extension of this range of operation are discussed     

Liquid Metal Marbles

Liquid metal marbles that are droplets of liquid metal encapsulated by micro‐ or nanoparticles are introduced. Droplets of galinstan liquid metal are coated with insulators (including Teflon and silica) and semiconductors (including WO₃, TiO_2, MoO₃, In₂O₃ and carbon nanotubes) by rolling over a powder bed and also by submerging in colloidal suspensions. It is shown that these marbles can be split and merged, can be suspended on water, and are even stable when moving under the force of gravity and impacting a flat solid surface. Furthermore, the marble coating can operate as an active electronic junction and the nanomaterial coated liquid metal marble can act as a highly sensitive electrochemical based heavy metal ion sensor. This new element thus represents a significant platform for the advancement of research into soft electronics.     

Detrended fluctuation analysis of intracranial pressure predicts outcome following traumatic brain injury

Detrended fluctuation analysis (DFA) is a recently developed technique suitable for describing scaling behavior of variability in physiological signals. The purpose of this study is to explore applicability of DFA methods to intracranial pressure (ICP) signals recorded in patients with traumatic brain injury (TBI). In addition to establishing the degree of fit of the power-law scaling model of detrended fluctuations of ICP in TBI patients, we also examined the relationship of DFA coefficients (scaling exponent and intercept) to: 1) measures of initial neurological functioning; 2) measures of functional outcome at six month follow-up; and 3) measures of outcome, controlling for patient characteristics, and initial neurological status. In a sample of 147 moderate-to-severely injured TBI patients, we found that a higher DFA scaling exponent is significantly associated with poorer initial neurological functioning, and that lower DFA intercept and higher DFA scaling exponent jointly predict poorer functional outcome at six month follow-up, even after statistical control for covariates reflecting initial neurological condition. DFA describes properties of ICP signal in TBI patients that are associated with both initial neurological condition and outcome at six months postinjury.      

Experimental Study of Capture Effect for Medium Access Control with ALOHA

In this paper, we investigate the capture effect through experiments conducted with Iris nodes equipped with AT86RF230 radio transceivers. It is shown that the first arriving packet in a collision can capture the radio channel for equal power transmissions and may be decoded depending on the amount of overlap. A new 3‐packet‐capture scenario is introduced and implemented. To be able to understand the impact of capture on the throughput performance of wireless sensor networks, we present an analysis of the capture coefficient using our practical results. For real‐world implementations, the throughput of pure ALOHA considering a finite number of users is presented in analytical form. The capture coefficient is then applied to pure ALOHA as a case study. Using analytical and practical implementations of the capture effect on ALOHA, a very good match in channel throughput performance enhancement is demonstrated over the non‐capture effect case. TinyOS‐2.x is used to program the nodes and to observe data exchange on a computer through a base station.