Highly Stretchable and Sensitive Strain Sensors Using Fragmentized Graphene Foam

Stretchable electronics have recently been extensively investigated for the development of highly advanced human‐interactive devices. Here, a highly stretchable and sensitive strain sensor is fabricated based on the composite of fragmentized graphene foam (FGF) and polydimethylsiloxane (PDMS). A graphene foam (GF) is disintegrated into 200–300 μm sized fragments while maintaining its 3D structure by using a vortex mixer, forming a percolation network of the FGFs. The strain sensor shows high sensitivity with a gauge factor of 15 to 29, which is much higher compared to the GF/PDMS strain sensor with a gauge factor of 2.2. It is attributed to the great change in the contact resistance between FGFs over the large contact area, when stretched. In addition to the high sensitivity, the FGF/PDMS strain sensor exhibits high stretchability over 70% and high durability over 10 000 stretching‐releasing cycles. When the sensor is attached to the human body, it functions as a health‐monitoring device by detecting various human motions such as the bending of elbows and fingers in addition to the pulse of radial artery. Finally, by using the FGF, PDMS, and μ‐LEDs, a stretchable touch sensor array is fabricated, thus demonstrating its potential application as an artificial skin.     

Non‐Volatile Polymer Electroluminescence Programmable with Ferroelectric Field‐Induced Charge Injection Gate

Electroluminescence (EL) of organic and polymeric fluorescent materials programmable in the luminance is extremely useful as a non‐volatile EL memory with the great potential in the variety of emerging information storage applications for imaging and motion sensors. In this work, a novel non‐volatile EL memory in which arbitrarily chosen EL states are programmed and erased repetitively with long EL retention is demonstrated. The memory is based on utilizing the built‐in electric field arising from the remnant polarization of a ferroelectric polymer which in turn controls the carrier injection of an EL device. A device with vertically stacked components of a transparent bottom electrode/a ferroelectric polymer/a hole injection layer/a light emitting layer/a top electrode successfully emits light upon alternating current (AC) operation. Interestingly, the device exhibits two distinctive non‐volatile EL intensities at constant reading AC voltage, depending upon the programmed direct current (DC) voltage on the ferroelectric layer. DC programmed and AC read EL memories are also realized with different EL colors of red, green and blue. Furthermore, more than four distinguishable EL states are precisely addressed upon the programmed voltage input each of which shows excellent EL retention and multiple cycle endurance of more than 10⁵ s and 10² cycles, respectively.     

Strain‐Visualization with Ultrasensitive Nanoscale Crack‐Based Sensor Assembled with Hierarchical Thermochromic Membrane

As eidetic signal recognition has become important, displaying mechanical signals visually has imposed huge demands for simple readability and without complex signal processing. Such visualization of mechanical signals is used in delicate urgent medical or safety‐related industries. Accordingly, chromic materials are considered to facilitate visualization with multiple colors and simple process. However, the response and recovery time is very long, such that rapid regular signals are unable to be detected, i.e., physiological signals, such as respiration. Here, the simple visualization of low strain ≈2%, with ultrasensitive crack‐based strain sensors with a hierarchical thermochromic layer is suggested. The sensor shows a gradient color change from red to white color in each strain, which is attributed to the hierarchical property, and the thermal response (recovery) time is dramatically minimized within 0.6 s from 45 to 37 °C, as the hierarchical membrane is inspired by termite mounds for efficient thermal management. The fast recovery property can be taken advantage of in medical fields, such as monitoring regular respiration, and the color changes can be delicately monitored with high accuracy by software on a mobile phone.     

Tunnel lane‐positioning system for autonomous driving cars using LED chromaticity and fuzzy logic system

Currently, studies on autonomous driving are being actively conducted. Vehicle positioning techniques are very important in the autonomous driving area. Currently, the global positioning system (GPS) is the most widely used technology for vehicle positioning. Although technologies such as the inertial navigation system and vision are used in combination with GPS to enhance precision, there is a limitation in measuring the lane and position in shaded areas of GPS, like tunnels. To solve such problems, this paper presents the use of LED lighting for position estimation in GPS shadow areas. This paper presents simulations in the environment of three‐lane tunnels with LEDs of different color temperatures, and the results show that position estimation is possible by the analyzing chromaticity of LED lights. To improve the precision of positioning, a fuzzy logic system is added to the location function in the literature [1]. The experimental results showed that the average error was 0.0619 cm, and verify that the performance of developed position estimation system is viable compared with previous works.     

Optical BGP Routing Convergence in Lightpath Failure of Optical Internet

Optical Border Gateway Protocol (OBGP) is an extension to BGP for Optical Cross Connects (OXCs) to automatically setup multiple direct optical lightpaths between many different autonomous domains. With OBGP, the routing component of a network may be distributed to the edge of the network while the packet classification and forwarding is done in the core. However, it is necessary to analyze the stable convergence functions of OBGP in case of lightpath failures. In this paper, we first describe the architecture of the OBGP model and analyze the potential problems of OBGP, e.g., virtual BGP router convergence behavior in the presence of lightpath failure. We then propose an OBGP convergence model derived from an inter‐AS (Autonomous System) relationship. The evaluation results show that the proposed model can be used for a stable OBGP routing policy and OBGP routing convergence under lightpath failures of the optical Internet.     

Design and Architecture of Low‐Latency High‐Speed Turbo Decoders

In this paper, we propose and present implementation results of a high‐speed turbo decoding algorithm. The latency caused by (de)interleaving and iterative decoding in a conventional maximum a posteriori turbo decoder can be dramatically reduced with the proposed design. The source of the latency reduction is from the combination of the radix‐4, center to top, parallel decoding, and early‐stop algorithms. This reduced latency enables the use of the turbo decoder as a forward error correction scheme in real‐time wireless communication services. The proposed scheme results in a slight degradation in bit error rate performance for large block sizes because the effective interleaver size in a radix‐4 implementation is reduced to half, relative to the conventional method. To prove the latency reduction, we implemented the proposed scheme on a field‐programmable gate array and compared its decoding speed with that of a conventional decoder. The results show an improvement of at least five fold for a single iteration of turbo decoding.     

A sub-space method to detect multiple wireless microphone signals in TV band white space

The main hurdle in the realization of dynamic spectrum access systems from the physical layer perspective is the reliable sensing of low power licensed users. One such scenario shows up in the unlicensed use of the TV bands where the TV band devices are required to sense extremely low power wireless microphones (WMs). The lack of technical standards among various wireless manufacturers and the resemblance of certain WM signals to narrow-band interference signals, such as spurious emissions, further aggravate the problem. Due to these uncertainties, it is extremely difficult to abstract the features of WM signals and hence develop robust sensing algorithms. To partly counter these challenges, we develop a two-stage sub-space algorithm that detects multiple narrow-band analog frequency-modulated signals generated by WMs. The performance of the algorithm is verified by using the real WM signals experimentally captured under low SNR conditions. The problem of differentiating between the WM and other narrow-band signals is left as future work.     

Novel Hybrid Content Synchronization Scheme for Augmented Broadcasting Services

As a new hybrid broadcasting service, augmented broadcasting shows enhanced broadcasting content on a large TV screen, while augmented reality (AR) on a mobile device augments additional graphical content onto an input image from the device's own camera to provide useful and convenient information for users. A one‐sided broadcasting service using AR has already been attempted in virtual advertisements during sport broadcasts. However, because its augmentation is preprocessed before the video image is transmitted, the viewer at home may have no influence on this formation; and no interaction for the user is possible unless the viewer has a direct connection to the content provider. Augmented broadcasting technology enables viewers to watch mixed broadcasting content only when they want such service and to watch original broadcasting content when they do not. To realize an augmented broadcasting service, the most important issue is to resolve the hybrid content synchronization over heterogeneous broadcast and broadband networks. This paper proposes a novel hybrid content synchronization scheme for an augmented broadcasting service and presents its implementation and results in a terrestrial DTV environment.     

Photomultiplication-Type Organic Photodetectors with High EQE-Bandwidth Product by Introducing a Perovskite Quantum Dot Interlayer

A photomultiplication (PM)-type organic photodetector (OPD) that exploits the ionic motion in CsPbI₃ perovskite quantum dots (QDs) is demonstrated. The device uses a QD monolayer as a PM-inducing interlayer and a donor–acceptor bulk heterojunction (BHJ) layer as a photoactive layer. When the device is illuminated, negative ions in the CsPbI₃ QD migrate and accumulate near the interface between the QDs and the electrode; these processes induce hole injection from the electrode and yield the PM phenomenon with an external quantum efficiency (EQE) >2000% at a 3 V applied bias. It is confirmed that the ionic motion of the CsPbI₃ QDs can induce a shift in the work function of the QD/electrode interface and that the dynamics of ionic motion determines the response speed of the device. The PM OPD showed a large EQE-bandwidth product >10⁶ Hz with a −3 dB frequency of 125 kHz at 3 V, which is one of the highest response speeds reported for a PM OPD. The PM-inducing strategy that exploits ionic motion of the interlayer is a potential approach to achieving high-efficiency PM OPDs.